On Mon, 20 Dec 2010 12:25:03 -0800, David Brodbeck <g...@gull.us> wrote: > On Wed, Dec 8, 2010 at 1:42 AM, Charlie Kester <corky1...@comcast.net> wrote: > > As a last gasp effort, I gave my LJ4+ a thorough cleaning and replaced > > the rollers for the output feed in the back. And hey, it seems to be > > working now! The way it had been sounding, I was sure I'd broken > > something the last time I replaced the toner cartridge after clearing a > > paper jam. But maybe I just didn't have the cartridge properly > > seated... > > > > So now I'm looking into ways to adapt it to use a network connection. > > If you shop around you should be able to find an old JetDirect MIO > card that will slot into the back of it. That's the best solution.
Agreed. There's an alternative solution that should be mentioned: In the past, there have been adaptors from parallel (Centronics) to RJ45 UTP network that could be put directly onto the back of the printer. Other more elegant solutions were small print servers, connected and configured via network, allowing one or two parallel printers to be attached. I'm not sure if such devices are still sold, but you should be able to get a used one for less than nothing. :-) -- Polytropon Magdeburg, Germany Happy FreeBSD user since 4.0 Andra moi ennepe, Mousa, ... _______________________________________________ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "freebsd-questions-unsubscr...@freebsd.org"