On Apr 26, 2011, at 9:53 AM, Maciej Milewski wrote: > On Tuesday 26 of April 2011 15:45:22, Ryan Coleman wrote: >> I have a bridge set up, pingable... but can't ping the em1 (192.168.46.2) > from the remote machine. > ... >> push "route 192.168.47.0 255.255.255.0" > > Have you tried adding the route to 192.168.46.0/24 subnet into the vpn client? > > You want to ping the host/interface on different subnet. If you don't set the > routing to this subnet how your client should know that he needs to put that > packet through tap interface not defaultroute which I suspect is different? > > Can you show the output of netstat -rn of the vpn client? > > You may try to look into tcpdump on the vpn router to find what is going with > your packets.And for such scenario like vpnclient->vpnserver->network you may > even not need nat just simple routing will be enough as long as you set it up > on right. > > My setup is based on tun interfaces and works like a charm. I don't use nat > and I only added routing info to the specific routers in the internal > networks. > > Maciej Milewski
I'm going to have to get this information when I get home and am not on the office LAN. I can do ping tests specifically through the tap0 interface but not check the netstat report properly from inside the network. -- Ryan _______________________________________________ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "freebsd-questions-unsubscr...@freebsd.org"