New to me. Does the machine have any unusual settings, like a non-default
securelevel?
No. There are no unusual security settings.
On Fri, 18 Nov 2011, Warren Block wrote:
On Fri, 18 Nov 2011, Xihong Yin wrote:
I set the adapter up.
Here is the output of 'dhclient em0'
DHCPREQUEST on em0 to 255.255.255.255 port 67
DHCPACK from 192.168.3.1
bound to 192.168.3.41 -- renewal in 1800 seconds.
'ifconfig em0' output is
em0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
options=219b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,VLAN_HWCSUM,TSO4,WOL_MAGIC>
ether 00:26:b9:9d:30:dc
inet 0.0.0.0 netmask 0xff000000 broadcast 255.255.255.255
media: Ethernet autoselect (100baseTX <full-duplex>)
status: active
'netstat -r' show there is no default route
Routing tables
Internet:
Destination Gateway Flags Refs Use Netif Expire
0.0.0.0 link#1 U 0 0 em0
localhost link#14 UH 0 28 lo0
But I can set the adapter manually by
$ifconfig em0 inet 192.168.3.41/24
and it works.
The question is why dhclient can't get the ip address even a lease is
obtained.
New to me. Does the machine have any unusual settings, like a non-default
securelevel?
_______________________________________________
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to "freebsd-questions-unsubscr...@freebsd.org"
