The error message in the ppp.log file indicates that ppp is attempting to negotiate an IPv6 address with Sympatico, which it refuses.
How do you configure your vr0 interface in /etc/rc.conf? -- Matt Emmerton ----- Original Message ----- From: "E. J. Cerejo" <[EMAIL PROTECTED]> To: "Benedict Plante" <[EMAIL PROTECTED]> Cc: <[EMAIL PROTECTED]> Sent: Saturday, April 05, 2003 9:52 PM Subject: Re: PPPoE : User can't access while root can! > You need to edit /etc/group file and make every user member of the > network group I believe. > The line that you looking for on this file should look like this: > > network:*:69:root,webdude,webdude2,webdude3 > > separate user by commons and no spaces. > > > Benedict Plante wrote: > > Hello all! > > Well, let get straight to the point. I use Bell Canada Sympatico Internet Service Provider, with a DSL connection, and I'm using FreeBSD-4.8-release. > > > > I've used FreeBSD-4.7 for a while, and sometime, when I installed, ppp wasn't working for user... unless one time, when I completely wipe my FreeBSD-4.7 partition and reinstalling it, it worked. Later, I deinstalled it and reinstalled it completely and it wasn't working. > > > > Now, I've move to FreeBSD-4.8-release and its still not working! I mean... it does work as root but not as a user. > > > > If I use internet with a user from the wheel group, it gives me that message: > > > > $ ping www.google.ca > > ping: cannot resolve www.google.ca: Host name lookup failure > > > > In order to make my connection work, I need to configure my /etc/ppp/ppp.conf along with rp-pppoe-3.5. > > > > -----Here is my /etc/ppp/ppp.conf: > > > > default: > > set log Phase tun command > > set ifaddr 10.0.0.1/0 10.0.0.2/0 > > > > sympatico.ca: > > set device PPPoE:vr0 > > set authname * > > set authkey * > > set dial > > set login > > add default HISADDR > > > > > > > > -----Here is my /etc/rc.conf: > > > > hostname="FreeBSD" > > kern_securelevel_enable="NO" > > linux_enable="YES" > > moused_enable="YES" > > moused_port="/dev/psm0" > > moused_type="auto" > > nfs_reserved_port_only="YES" > > sendmail_enable="YES" > > sshd_enable="YES" > > usbd_enable="YES" > > ppp_enable="YES" > > ppp_mode="ddial" > > ppp_profile="sympatico.ca" > > ppp_nat="YES" #I tried with it turned to "NO" also > > inetd_enable="YES" > > > > > > -----Here is my /var/log/ppp.log: > > > > 15:24:53 FreeBSD ppp[53]: tun0: Phase: Received NGM_PPPOE_ACNAME (hook "62031100098933-") > > Apr 5 15:24:53 FreeBSD ppp[53]: tun0: Phase: Received NGM_PPPOE_SESSIONID > > Apr 5 15:24:53 FreeBSD ppp[53]: tun0: Phase: Received NGM_PPPOE_SUCCESS > > Apr 5 15:24:53 FreeBSD ppp[53]: tun0: Phase: deflink: carrier -> login > > Apr 5 15:24:53 FreeBSD ppp[53]: tun0: Phase: deflink: login -> lcp > > Apr 5 15:24:53 FreeBSD ppp[53]: tun0: Warning: deflink: Reducing configured MRU from 1500 to 1492 > > Apr 5 15:24:53 FreeBSD ppp[53]: tun0: Phase: bundle: Authenticate > > Apr 5 15:24:53 FreeBSD ppp[53]: tun0: Phase: deflink: his = PAP, mine = none > > Apr 5 15:24:53 FreeBSD ppp[53]: tun0: Phase: Pap Output: *** ******** > > Apr 5 15:24:54 FreeBSD ppp[53]: tun0: Phase: Pap Input: SUCCESS () > > Apr 5 15:24:54 FreeBSD ppp[53]: tun0: Phase: deflink: lcp -> open > > Apr 5 15:24:54 FreeBSD ppp[53]: tun0: Phase: bundle: Network > > Apr 5 15:24:54 FreeBSD ppp[53]: tun0: Phase: deflink: IPV6CP protocol reject closes IPV6CP ! > > Apr 5 15:25:06 FreeBSD last message repeated 5 times > > > > > > > > > > > > -----My ifconfig as root (working) > > FreeBSD# ifconfig > > vr0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500 > > inet6 fe80::250:baff:fee5:bdb0%vr0 prefixlen 64 scopeid 0x1 > > ether 00:50:ba:e5:bd:b0 > > media: Ethernet autoselect (10baseT/UTP) > > status: active > > lp0: flags=8810<POINTOPOINT,SIMPLEX,MULTICAST> mtu 1500 > > sl0: flags=c010<POINTOPOINT,LINK2,MULTICAST> mtu 552 > > faith0: flags=8002<BROADCAST,MULTICAST> mtu 1500 > > lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384 > > inet6 ::1 prefixlen 128 > > inet6 fe80::1%lo0 prefixlen 64 scopeid 0x5 > > inet 127.0.0.1 netmask 0xff000000 > > ppp0: flags=8010<POINTOPOINT,MULTICAST> mtu 1500 > > tun0: flags=8051<UP,POINTOPOINT,RUNNING,MULTICAST> mtu 1492 > > inet 64.228.205.31 --> 64.228.205.1 netmask 0xffffffff > > Opened by PID 53 > > > > > > > > -----My ifconfig as user (wheel): > > > > $ ifconfig > > vr0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500 > > inet6 fe80::250:baff:fee5:bdb0%vr0 prefixlen 64 scopeid 0x1 > > ether 00:50:ba:e5:bd:b0 > > media: Ethernet autoselect (10baseT/UTP) > > status: active > > lp0: flags=8810<POINTOPOINT,SIMPLEX,MULTICAST> mtu 1500 > > sl0: flags=c010<POINTOPOINT,LINK2,MULTICAST> mtu 552 > > faith0: flags=8002<BROADCAST,MULTICAST> mtu 1500 > > lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384 > > inet6 ::1 prefixlen 128 > > inet6 fe80::1%lo0 prefixlen 64 scopeid 0x5 > > inet 127.0.0.1 netmask 0xff000000 > > ppp0: flags=8010<POINTOPOINT,MULTICAST> mtu 1500 > > tun0: flags=8051<UP,POINTOPOINT,RUNNING,MULTICAST> mtu 1492 > > inet 64.228.205.31 --> 64.228.205.1 netmask 0xffffffff > > Opened by PID 53 > > > > > > > > > > ----- Do you need some more info??? Thank you to all the people who will help me :). > > > > Erythro73 > > > > > > > > > > _______________________________________________ > > [EMAIL PROTECTED] mailing list > > http://lists.freebsd.org/mailman/listinfo/freebsd-questions > > To unsubscribe, send any mail to "[EMAIL PROTECTED]" > > > > > _______________________________________________ > [EMAIL PROTECTED] mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-questions > To unsubscribe, send any mail to "[EMAIL PROTECTED]" > _______________________________________________ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
