On Thu, Jan 12, 2012 at 11:29 PM, Da Rock < freebsd-questi...@herveybayaustralia.com.au> wrote:
> On 01/13/12 17:11, Waitman Gobble wrote: > >> On Thu, Jan 12, 2012 at 10:04 PM, Da Rock< >> freebsd-questions@**herveybayaustralia.com.au<freebsd-questi...@herveybayaustralia.com.au>> >> wrote: >> >> On 01/13/12 15:29, Waitman Gobble wrote: >>> >>> Hello, >>>> >>>> I am running 9.0-RC3 i386 on an Acer Aspire One D150. i am having >>>> trouble >>>> with the wireless setup. >>>> >>>> I have two wireless cards, the BCM94312MCG that came with it, and an >>>> Atheros 5424/2424 that i swapped out. I can run the BCM with ndis and >>>> the >>>> windows xp driver, and the Atheros with the ath driver that is installed >>>> with FreeBSD. (But BCM/ndis is noticeably much slower, Atheros - no >>>> green >>>> "wireless" light appears on netbook ) >>>> >>>> i am getting the same results with either nic card, and i think i am >>>> just >>>> missing something simple. >>>> >>>> >>>> ath0: flags=8843<UP,BROADCAST,****RUNNING,SIMPLEX,MULTICAST> metric >>>> 0 mtu >>>> >>>> 2290 >>>> ether 00:24:2b:ad:d6:5f >>>> nd6 options=29<PERFORMNUD,****IFDISABLED,AUTO_LINKLOCAL> >>>> >>>> media: IEEE 802.11 Wireless Ethernet autoselect mode 11g >>>> status: associated >>>> >>>> wlan0: flags=8843<UP,BROADCAST,****RUNNING,SIMPLEX,MULTICAST> >>>> metric 0 >>>> >>>> mtu 1500 >>>> ether 00:24:2b:ad:d6:5f >>>> inet 10.0.0.21 netmask 0xffffff00 broadcast 10.0.0.255 >>>> nd6 options=29<PERFORMNUD,****IFDISABLED,AUTO_LINKLOCAL> >>>> >>>> media: IEEE 802.11 Wireless Ethernet OFDM/24Mbps mode 11g >>>> status: associated >>>> ssid CUDAPANG channel 6 (2437 MHz 11g) bssid 00:22:3f:9b:b8:aa >>>> regdomain 101 indoor ecm authmode OPEN privacy ON deftxkey 1 >>>> wepkey 1:104-bit txpower 20 bmiss 7 scanvalid 60 bgscan >>>> bgscanintvl 300 bgscanidle 250 roam:rssi 7 roam:rate 5 protmode CTS >>>> wme burst >>>> >>>> connecting: >>>> >>>> ifconfig wlan0 create wlandev ath0 >>>> ifconfig wlan0 up scan >>>> ifconfig wlan0 inet 10.0.0.21 netmask 255.255.255.0 ssid CUDAPANG >>>> wepmode >>>> on weptxkey 1 wepkey 1:0x10961323931B628F844360718A >>>> >>>> >>>> scan results: >>>> >>>> p00ntang# ifconfig wlan0 up scan >>>> SSID/MESH ID BSSID CHAN RATE S:N INT CAPS >>>> CUDAPANG 00:22:3f:9a:16:1b 6 54M -69:-93 100 EPS ATH >>>> CUDAPANG 00:22:3f:9b:b8:aa 6 54M -68:-93 100 EPS WME ATH >>>> Abujie 00:14:6c:7a:98:ec 6 54M -89:-93 100 EPS RSN WPA >>>> ATH >>>> TDMA >>>> chavez family 00:c0:02:11:22:33 6 54M -88:-93 100 EP HTCAP RSN >>>> WME WPS >>>> >>>> My machine shows up on the wireless router as a "connected device" w/ >>>> correct mac and ip showing >>>> >>>> But i cannot ping gw, no machine on lan or outside. (no route to host) >>>> >>>> p00ntang# netstat -nr >>>> Routing tables >>>> >>>> Internet: >>>> Destination Gateway Flags Refs Use Netif >>>> Expire >>>> default 10.0.0.1 UGS 0 3338 ale0 >>>> 10.0.0.0/24 link#2 U 0 2405 ale0 >>>> 10.0.0.20 link#2 UHS 0 0 lo0 >>>> 10.0.0.21 link#9 UHS 0 2 lo0 >>>> 127.0.0.1 link#8 UH 0 12 lo0 >>>> >>>> I do not see "ath0' or wlan0 in the routing table under 'Netif', not >>>> sure >>>> if that's the problem :) >>>> >>>> >>>> p00ntang# less /etc/rc.conf >>>> hostname="p00ntang" >>>> ifconfig_ale0=" inet 10.0.0.20 netmask 255.255.255.0" >>>> defaultrouter="10.0.0.1" >>>> sshd_enable="YES" >>>> ntpd_enable="YES" >>>> # Set dumpdev to "AUTO" to enable crash dumps, "NO" to disable >>>> dumpdev="NO" >>>> fusefs_enable="YES" >>>> hald_enable="YES" >>>> dbus_enable="YES" >>>> moused_enable="YES" >>>> snddetect_enable="YES" >>>> mixer_enable="YES" >>>> avahi_daemon_enable="YES" >>>> ices0_enable="YES" >>>> >>>> >>>> p00ntang# grep ath /boot/loader.conf >>>> if_ath_load="YES" >>>> p00ntang# grep wlan /boot/loader.conf >>>> wlan_wep_load="YES" >>>> wlan_ccmp_load="YES" >>>> wlan_tkip_load="YES" >>>> >>>> >>>> >>>> i've tried /etc/rc.d/routing restart.. no worky :) >>>> >>>> here's my wired connection ifconfig --- wired connection works :) >>>> >>>> ale0: flags=8843<UP,BROADCAST,****RUNNING,SIMPLEX,MULTICAST> metric >>>> 0 mtu >>>> 1500 >>>> options=c319a<TXCSUM,VLAN_MTU,****VLAN_HWTAGGING,VLAN_HWCSUM,**** >>>> TSO4,WOL_MCAST,WOL_MAGIC,VLAN_****HWTSO,LINKSTATE> >>>> >>>> ether 00:23:5a:59:e1:e4 >>>> inet 10.0.0.20 netmask 0xffffff00 broadcast 10.0.0.255 >>>> inet6 fe80::223:5aff:fe59:e1e4%ale0 prefixlen 64 scopeid 0x2 >>>> nd6 options=29<PERFORMNUD,****IFDISABLED,AUTO_LINKLOCAL> >>>> >>>> media: Ethernet autoselect (100baseTX<full-duplex>) >>>> status: active >>>> >>>> >>>> >>>> >>>> any help/suggestions much appreciated! >>>> >>>> The solution is simple, but I know the frustration well. >>> >>> Your problem is that the route is looking to go through your wired >>> network >>> port, you started the network on the wired and then switched to wifi so >>> the >>> routing needs to change. >>> >>> Run as root: "route change default -interface wlan0" will fix that >>> temporarily. To fix it permanently (better for a laptop situation >>> anyway, I >>> feel), setup a lagg port including ale0 and wlan0. See >>> http://www.freebsd.org/doc/****handbook/network-aggregation.****html<http://www.freebsd.org/doc/**handbook/network-aggregation.**html> >>> <http://www.freebsd.org/**doc/handbook/network-**aggregation.html<http://www.freebsd.org/doc/handbook/network-aggregation.html> >>> > >>> >>> >>> Good luck and happy networking! >>> ______________________________****_________________ >>> freebsd-questions@freebsd.org mailing list >>> http://lists.freebsd.org/****mailman/listinfo/freebsd-****questions<http://lists.freebsd.org/**mailman/listinfo/freebsd-**questions> >>> <http://lists.**freebsd.org/mailman/listinfo/**freebsd-questions<http://lists.freebsd.org/mailman/listinfo/freebsd-questions> >>> > >>> To unsubscribe, send any mail to "freebsd-questions-** >>> unsubscr...@freebsd.org<freebs**d-questions-unsubscribe@**freebsd.org<freebsd-questions-unsubscr...@freebsd.org> >>> >" >>> >>> >> Thanks, that's very helpful - seems to be the issue. Getting rid of my >> ale0 >> ifconfig spec in rc.conf also seems to solve the problem. But I'm dropping >> roughly 20% packets on ping so i'm going to see what's up. Otherwise i'm >> now semi-functional on the wireless connection. >> > Ahh, yes. Those were the days before lagg... endless frustration. I was > looking at finding a way to use devd to run a script that made the route > change, but then this feature came round and I was happy. > > You may want to change to wpa- more secure than wep. > > ______________________________**_________________ > freebsd-questions@freebsd.org mailing list > http://lists.freebsd.org/**mailman/listinfo/freebsd-**questions<http://lists.freebsd.org/mailman/listinfo/freebsd-questions> > To unsubscribe, send any mail to "freebsd-questions-** > unsubscr...@freebsd.org <freebsd-questions-unsubscr...@freebsd.org>" > Hi, Thanks. I've always heard countless rumors about WPA being wise :) I'll take your advice and take a step up in technology. My "stubborn conservatism" probably roots back to the time when not all devices could do WPA, or at least I had crazy trouble getting things to work. But this learned attitude was probably around 2000, which was like a million years ago with dinosaurs and stuff. Time for me to finally get with it. I found the lagg documenation in docs http://www.freebsd.org/doc/en_US.ISO8859-1/books/handbook/network-aggregation.html Duh! I went through wireless section in the handbook several times, I don't know how i missed this paragraph in 32.3.6: "We will cover link aggregation and failover in Section 32.6<http://www.freebsd.org/doc/handbook/network-aggregation.html> where an example for using both wired and wireless connection is also provided at Example 32-3<http://www.freebsd.org/doc/handbook/network-aggregation.html#NETWORKING-LAGG-WIRED-AND-WIRELESS> ." Thanks again, Waitman _______________________________________________ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "freebsd-questions-unsubscr...@freebsd.org"