On Mon, 21 Jan 2013 22:52:17, Derek Ragona wrote: DR> I have a couple servers that are built using the supermicro X9SCM-F/X9CL-F DR> motherboards, and I can't quite get IPMI SOL working right. DR> DR> These motherboards have 3 NIC's. One NIC is for a dedicated IPMI interface. DR> DR> I have both servers configured to use the dedicated IPMI NIC and these DR> NIC's are plugged into a separate unmanaged switch. DR> DR> Both systems boards are set to redirect com1. I changed /etc/ttys to run a DR> getty on /dev/ttyu0. I have com1 configured to 115,200 baud, 8, n, 1, no DR> flowcontrol in the BIOS. I in have /etc/ttys: DR> ttyu0 "/usr/libexec/getty std.115200" vt100 on secure
/etc/ttys: ttyu1 "/usr/libexec/getty std.115200" vt100 on secure /boot/loader.conf: hint.uart.0.flags="0" hint.uart.1.flags="0x10" boot_serial="YES" boot_multicons="YES" comconsole_speed="115200" console="comconsole vidconsole" -- Anton Yuzhaninov _______________________________________________ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "freebsd-questions-unsubscr...@freebsd.org"
