Hi , Thanks a lot for this quick reply. Sorry i missed the " in the end while typing. It's a typo. I provided the ouput of " nestat -r " and "ifconfig".
> netstat -r -------------- routing tables - internet : ----------- destination Gateway Flags Refs Use Netif Expire default 192.168.200.1 UGS 0 0 re0 localhost link#12 UH 0 148 lo0 192.168.100.0 link#10 U 0 0 rl0 192.168.100.101 link#10 UHS 0 0 lo0 192.168.200.0 link#5 U 0 0 re0 192.168.200.101 link#5 UHS 0 0 lo0 Internet6: ------------------- Ipv6 details > Ifconfig -------------------- re0: flags=8843<UP,Broadcast,Running,Simplex,Multicast> Metric 0 mtu 1500 options=8209b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,VLAN_HWCSUM,WOL_MAGIC,LINKSTATE> ether 00:1f:d0:40:8b:bd inet6 fe80::21f:d0ff:fe40:8bbd%re0 prefixlen 64 scopeid 0x5 inet 192.168.200.101 netmask 0xffffff00 broadcast 192.168.200.255 nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL> media:Enthernet autoselect (none) status: no carrier rl0: flags=8843<UP,Broadcast,Running,Simplex,Multicast> Metric 0 mtu 1500 options=2008<VLAN_MTU,WOL_MAGIC> ether 00:10:b5:48:9f:73 inet6 fe80::21f:b5ff:fe48:9f73%rl0 prefixlen 64 scopeid 0xa inet 192.168.100.101 netmask 0xffffff00 broadcast 192.168.100.255 nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL> media:Enthernet autoselect (none) status: no carrier there is a plip0 and lo0. Regards Hrisikesh On Wed, May 22, 2013 at 12:02 PM, Trond Endrestøl < trond.endres...@fagskolen.gjovik.no> wrote: > On Wed, 22 May 2013 11:10+0530, hrkesh sahu wrote: > > > Hi All, > > IPv4 Routing - > > ------------------------ > > I disabled the DHCP from rc.conf for both the interface. but still I am > not > > able to route trafic from one interface to another. > > > > rc.conf > > --------------- > > hostname="idc-freebsd" > > keymap="hy.armscii-8.kbd" > > #ifconfig_re0="DHCP" > > #ifconfig_rl0="DHCP" > > dumpdev="NO" > > > ifconfig_rl0="inet 192.168.100.101 netmask 255.255.255.0 > > ifconfig_re0="inet 192.168.200.101 netmask 255.255.255.0 > > Are the two lines above copied straight from your rc.conf file? > If so, both lines are missing a " at the end. Please check to see if > this is needed. > > Next, the outputs of the ifconfig command and the netstat -r command > should reveal something interesting. Would you please post the > results from these two commands? > > > ipv6_activate_all_interfaces="YES" > > gateway_enable="YES" > > default_router="192.168.200.1" > > > > I am using FreeBSD - 9.1 Release version > > > > I need to communicate between two different subnets. > > > > Am i missing anything to enable freebsd as router? > > Do i need to add a route entry? > > > > If possible could you please share rc.conf file with IPv4 routing? > > > > Regards > > Hrisikesh > > > > On Thu, May 9, 2013 at 2:04 PM, Trond Endrestøl < > > trond.endres...@fagskolen.gjovik.no> wrote: > > > > > On Thu, 9 May 2013 12:18+0530, hrkesh sahu wrote: > > > > > > > > HI All, > > > > > > > > > I have a FreeBSD 9.1 Release installed with TWO NIC cards. I was > trying > > > to > > > > make this FreeBSD machine as a router . > > > > This is my rc.conf > > > > -------------------------------- > > > > ifconfig_rl0 = "inet 192.168.100.101 netmask 255.255.255.0" > > > > ifconfig_re0="inet 192.168.200.101 netmask 255.255.255.0" > > > > > > > > gateway_enable = "YES" > > > > ifconfig_rl0 = "DHCP" > > > > ifconfig_re0 = "DHCP" > > > > > > > > defaultrouter = "192.168.100.1" > > > > ipv6_activate_all_interfaces = "YES" > > > > sshd_enable = "YES" > > > > synchronous_dhclient="YES" > > > > > > > > Please help me to establish a IPv4 router. > > > > Both the interfaces are connected to to different laptops with a > static > > > IP > > > > address. > > > > > > You should place a # in front of the two lines: > > > > > > > ifconfig_rl0 = "DHCP" > > > > ifconfig_re0 = "DHCP" > > > > > > Next, you probably shouldn't place spaces before and after the equal > > > signs. > > > > > > > Laptop 1 = 192.168.100.102 ( connected to interface rl0) gateway - > > > > 192.168.100.1 > > > > > > > > Laptop 2 = 192.168.200.102 ( connected to interface re0) > > > > ping from Laptop1 -> rl0 is successful > > > > but ping from Laptop1 -> re0 is not successful. > > > > > > > > After this I want to know also How to make this as IPv6 router? > > > > > > See > > > > http://www.freebsd.org/doc/en_US.ISO8859-1/books/handbook/network-ipv6.html > > > . > > > > > > You probably should create a ULA prefix or two, and assign these to > > > your router interfaces. http://www.sixxs.net/tools/grh/ula/ might help > > > you. > > > > > > Something along these lines might help you achieve what you want: > > > > > > ifconfig_rl0_ipv6="inet6 fd8f:d6d0:e6e7:100::1 prefixlen 64" > > > ifconfig_re0_ipv6="inet6 fd44:13de:a366:200::1 prefixlen 64" > > > ipv6_gateway_enable="YES" > > > > > > Finally you probably should configure and enable Router Advertisement > > > and Host Auto Configuration as explained in section 32.11.6 of > > > > http://www.freebsd.org/doc/en_US.ISO8859-1/books/handbook/network-ipv6.html > > > . > > -- > +-------------------------------+------------------------------------+ > | Vennlig hilsen, | Best regards, | > | Trond Endrestøl, | Trond Endrestøl, | > | IT-ansvarlig, | System administrator, | > | Fagskolen Innlandet, | Gjøvik Technical College, Norway, | > | tlf. mob. 952 62 567, | Cellular...: +47 952 62 567, | > | sentralbord 61 14 54 00. | Switchboard: +47 61 14 54 00. | > +-------------------------------+------------------------------------+ > _______________________________________________ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "freebsd-questions-unsubscr...@freebsd.org"