On Aug 16, 2013, at 8:47 AM, aurfalien wrote: > Forgot to mention my loader.conf; > > if_mxge_load="YES" > mxge_ethp_z8e_load="YES" > mxge_eth_z8e_load="YES" > mxge_rss_ethp_z8e_load="YES" > mxge_rss_eth_z8e_load="YES" > > > I blindly added these w/o thinking what they do. > > Should I simply only load the first line? > > - aurf > > > On Aug 16, 2013, at 8:18 AM, aurfalien wrote: > >> Hi, >> >> I've been suspecting my NIC is not up to par and notice this in the logs >> every few minutes; >> >> Aug 16 08:05:06 prometheus kernel: mxge0: slice 0 struck? ring state: >> Aug 16 08:05:06 prometheus kernel: mxge0: tx.req=1914503981 >> tx.done=1914503810, tx.queue_active=0 >> Aug 16 08:05:06 prometheus kernel: mxge0: tx.activate=0 tx.deactivate=0 >> Aug 16 08:05:06 prometheus kernel: mxge0: pkt_done=1824019832 fw=1824019931 >> Aug 16 08:05:06 prometheus kernel: mxge0: Watchdog reset! >> Aug 16 08:05:06 prometheus kernel: mxge0: NIC did not reboot, not resetting >> >> Could tis be effecting throughput? >> >> My card is a Myri-10G-PCIE-8A >> >> I did install the Myrinet dev tools for FreeBSD and ran myri_info which >> yields; >> >> pci-dev at 05:00.0 vendor:product(rev)=14c1:0008(00) >> behind bridge root-port: 00:03.0 8086:3c08 (x8.1/x16.3) >> Myri-10G-PCIE-8A -- Link x8 >> EEPROM String-spec: >> MAC=00:60:dd:45:73:23 >> SN=413665 >> PWR=100 >> PC=10G-PCIE-8A-R >> PN=09-03852 >> XFI=AEL1010 >> TAG=ze_tools-1_4_45 >> >> EEPROM MCP, PRESENT, length = 103384, crc=0x119daf46 >> ETHZ::1.4.45 2009/08/22 18:57:06 self extracting firmware >> Bundle: exec_len=72144, PCI-ROM-len = 31232 >> Running MCP: >> ETH ::1.4.55 -P- 2012/04/21 01:48:34 myri10ge firmware >> >> Any insights are appreciated. >> >> - aurf
Did the ole RTFM and re programmed the firmware, all good now. - aurf _______________________________________________ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "freebsd-questions-unsubscr...@freebsd.org"
