Greetings, I just finished installing FreeBSD 4.7 on my box. My machine has an adaptec SCSI host adapter and a SCSI Dat tape drive. I expected to access my tape drive through the /dev/rmt device, but instead must use /dev/sa0 (I think this is right. I'm going from memory as I'm not at the machine right now).
Is this the normal device to reference when reading/writing to the scsi dat tape drive ?
thanks, -D
My IBM DDS2 drive is attached to my onboard Adaptec SCSI port and it only works when referred to as /dev/sa0. There are many /dev/listings for the drive, however there are complaints with some software, like Bacula, when I try to use the /dev/rsa0. So, I assume that /dev/sa0 is okay.
Bob
_______________________________________________ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
