>Hi!
>
>  Does anyone know if the Via EPIA 800MHz is supported in any version of
>freebsd. I tried it with 4.6.2 and it reboots as soon as kernel loads.
>Or do I need to enable any specific options in the kernel config.
>
>It has the following CPU-
>VIA C3 800 E-Series processor, 800 MHz
>
>I would appreciate any kind of help.
>
>Thanks
>
>*******************************************************************
> Pranav A. Desai

Yes, it does. My ipfilter/NAT machine is running 4.8-REL on a 933MHz EPIA 
board, and I have an X terminal running 4.8-REL on a 800MHz EPIA board.

I use the following kernel configuration (for the X terminal):

# Kernel configuration for gearbox (4/25/2003) working copy

machine         i386
cpu             I686_CPU
ident           gearbox
maxusers        0

options         INET                    #InterNETworking
#options                INET6                   #IPv6 Communications Protocols
options         FFS                     #Berkeley Fast Filesystem
options         FFS_ROOT                #FFS usable as root device [keep this!]
options         SOFTUPDATES             #Enable FFS soft updates support
options         MFS                     #Memory Filesystem
options         MD_ROOT                 #MD is a potential root device
options         MSDOSFS                 #MSDOS Filesystem
options         CD9660                  #ISO 9660 Filesystem
options         CD9660_ROOT             #CD-ROM usable as root, CD9660 required
options         PROCFS                  #Process filesystem
options         COMPAT_43               #Compatible with BSD 4.3 [KEEP THIS!]
options         SCSI_DELAY=1000         #Delay (in ms) before probing SCSI
options         UCONSOLE                #Allow users to grab the console
options         USERCONFIG              #boot -c editor
options         VISUAL_USERCONFIG       #visual boot -c editor
options         KTRACE                  #ktrace(1) support
options         SYSVSHM                 #SYSV-style shared memory
options         SYSVMSG                 #SYSV-style message queues
options         SYSVSEM                 #SYSV-style semaphores
options         P1003_1B                #Posix P1003_1B real-time extensions
options         _KPOSIX_PRIORITY_SCHEDULING
options         ICMP_BANDLIM            #Rate limit bad replies
options         KBD_INSTALL_CDEV        # install a CDEV entry in /dev
options         QUOTA
options         SUIDDIR
options         NO_F00F_HACK
options         DDB_UNATTENDED

device          isa
device          eisa
device          pci

# Floppy drives
#device         fdc0    at isa? port IO_FD1 irq 6 drq 2
#device         fd0     at fdc0 drive 0
#device         fd1     at fdc0 drive 1

# ATA and ATAPI devices
device          ata
device          atadisk                 # ATA disk drives
device          atapicd                 # ATAPI CDROM drives
#device         atapifd                 # ATAPI floppy drives
#device         atapist                 # ATAPI tape drives
options         ATA_STATIC_ID           #Static device numbering

# SCSI Controllers
#device         ahc             # AHA2940 and onboard AIC7xxx devices
#device         sym             # NCR/Symbios Logic device

# SCSI peripherals
device          scbus           # SCSI bus (required)
device          da              # Direct Access (disks)
#device         sa              # Sequential Access (tape etc)
device          cd              # CD
device          pass            # Passthrough device (direct SCSI access)

# atkbdc0 controls both the keyboard and the PS/2 mouse
device          atkbdc0 at isa? port IO_KBD
device          atkbd0  at atkbdc? irq 1 flags 0x1
device          psm0    at atkbdc? irq 12
device          vga0    at isa?

# splash screen/screen saver
pseudo-device   splash

# syscons is the default console driver, resembling an SCO console
device          sc0     at isa? flags 0x100

# Floating point support - do not disable.
device          npx0    at nexus? port IO_NPX irq 13

# Power management support (see LINT for more options)
#device         apm0    at nexus? disable flags 0x20 # Advanced Power Management

# Serial (COM) ports
device          sio0    at isa? port IO_COM1 irq 4
device          sio1    at isa? port IO_COM2 flags 0x10 irq 3

# Parallel port
device          ppc0    at isa? irq 7
device          ppbus           # Parallel port bus (required)
device          lpt             # Printer
device          plip            # TCP/IP over parallel
device          ppi             # Parallel port interface device
#device         vpo             # Requires scbus and da


# PCI Ethernet NICs.
device          miibus
device          vr              # Intel EtherExpress PRO/100B (82557, 82558)

# Pseudo devices - the number indicates how many units to allocate.
pseudo-device   loop            # Network loopback
pseudo-device   ether           # Ethernet support
pseudo-device   sl      1       # Kernel SLIP
#pseudo-device  ppp     1       # Kernel PPP
#pseudo-device  tun             # Packet tunnel.
pseudo-device   pty             # Pseudo-ttys (telnet etc)
pseudo-device   md              # Memory "disks"
pseudo-device   gif     4       # IPv6 and IPv4 tunneling
pseudo-device   faith   1       # IPv6-to-IPv4 relaying (translation)

# The `bpf' pseudo-device enables the Berkeley Packet Filter.
# Be aware of the administrative consequences of enabling this!
pseudo-device   bpf             #Berkeley packet filter

# USB support
device          uhci            # UHCI PCI->USB interface
device          ohci            # OHCI PCI->USB interface
device          usb             # USB Bus (required)
device          ugen            # Generic
device          uhid            # "Human Interface Devices"
device          ukbd            # Keyboard
device          ulpt            # Printer
device          umass           # Disks/Mass storage - Requires scbus and da
device          ums             # Mouse
device          uscanner        # Scanners
device          ucom
device          uplcom
device          uvscom
device          uvisor
device          uftdi

# Sound Support
device          pcm
device          joy0    at isa? port IO_GAME

Regards,
Seth Henry

_______________________________________________
[EMAIL PROTECTED] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to "[EMAIL PROTECTED]"

Reply via email to