Scott, I have problems with my startx script,see my other email "when I invoke startx, it seems to 'freeze' for a minute or so,then starts". Before fixing the startx issue (I think startx has been overwritten by the fluxconf->XFree86-libraries-4.3.0 installation), I tested xinit after setting the root setuid bit of the X server (which on my machine points to XF86_SVGA).According to the xinit error,"I should be using Xwrapper to start the server or xdm. We strongly advise against making the server SUID root!". So,with the setuid bit set,xinit works,but the elegant solution would be to use Xwrapper.How can I use Xwrapper ? Does it accept a server name to execute ?
When you say 'runlevel 5' do you mean the kernel securelevels (i remember runlevels used as boot levels in linux) ? Thank you for help Bruno ----- Original Message ----- From: "Scott W" <[EMAIL PROTECTED]> To: "[EMAIL PROTECTED]" <[EMAIL PROTECTED]> Cc: <[EMAIL PROTECTED]>; <[EMAIL PROTECTED]> Sent: Thursday, October 30, 2003 3:56 PM Subject: Re: xinit: "xf86OpenConsole: Server must be running with rootpermissions" You should be starting X via the 'startx' command if you're not using runlevel 5/[xgk]dm. Try that and see if the same problem persists. Scott [EMAIL PROTECTED] wrote: >Hi, > >I just installed a port (fluxconf).That port installed Xfree86 Libraries 4.3.0. >Since then,when I invoke xinit, it exits with the error >"xf86OpenConsole: Server must be running with root permissions" >I include the output of 'uname -a' and >the brief output from xinit for the problem > >Thank you very much >Bruno > >[EMAIL PROTECTED] (/dev/ttyp0) /usr/home/bruno 2>> uname -a >FreeBSD ciao.singles.it 4.9-RC FreeBSD 4.9-RC #0: Wed Oct 15 00:12:26 CEST 2003 >root@:/usr/obj/usr/src/sys/CURRENT_WINE i386 > >[EMAIL PROTECTED] (/dev/ttyp0) /usr/home/bruno 2>>xinit > >XFree86 Version 3.3.6 / X Window System >(protocol Version 11, revision 0, vendor release 6300) >Release Date: January 8 2000 > If the server is older than 6-12 months, or if your card is newer > than the above date, look for a newer version before reporting > problems. (see http://www.XFree86.Org/FAQ) >Operating System: FreeBSD 4.1.1-STABLE i386 [ELF] >Configured drivers: > SVGA: server for SVGA graphics adaptors (Patchlevel 1): > NV1, STG2000, RIVA 128, RIVA TNT, RIVA TNT2, RIVA ULTRA TNT2, > RIVA VANTA, RIVA ULTRA VANTA, RIVA INTEGRATED, GeForce 256, > GeForce DDR, Quadro, ET4000, ET4000W32, ET4000W32i, ET4000W32i_rev_b, > ET4000W32i_rev_c, ET4000W32p, ET4000W32p_rev_a, ET4000W32p_rev_b, > ET4000W32p_rev_c, ET4000W32p_rev_d, ET6000, ET6100, et3000, pvga1, > wd90c00, wd90c10, wd90c30, wd90c24, wd90c31, wd90c33, gvga, r128, ati, > sis86c201, sis86c202, sis86c205, sis86c215, sis86c225, sis5597, > sis5598, sis6326, sis530, sis620, sis300, sis630, sis540, tvga8200lx, > tvga8800cs, tvga8900b, tvga8900c, tvga8900cl, tvga8900d, tvga9000, > tvga9000i, tvga9100b, tvga9200cxr, tgui9400cxi, tgui9420, tgui9420dgi, > tgui9430dgi, tgui9440agi, cyber9320, tgui9660, tgui9680, tgui9682, > tgui9685, cyber9382, cyber9385, cyber9388, cyber9397, cyber9520, > cyber9525, 3dimage975, 3dimage985, cyber9397dvd, blade3d, cyberblade, > clgd5420, clgd5422, clgd5424, clgd5426, clgd5428, clgd5429, clgd5430, > clgd5434, clgd5436, clgd5446, clgd5480, clgd5462, clgd5464, clgd5465, > clgd6205, clgd6215, clgd6225, clgd6235, clgd7541, clgd7542, clgd7543, > clgd7548, clgd7555, clgd7556, ncr77c22, ncr77c22e, cpq_avga, mga2064w, > mga1064sg, mga2164w, mga2164w AGP, mgag200, mgag100, mgag400, oti067, > oti077, oti087, oti037c, al2101, ali2228, ali2301, ali2302, ali2308, > ali2401, cl6410, cl6412, cl6420, cl6440, video7, ark1000vl, ark1000pv, > ark2000pv, ark2000mt, mx, realtek, AP6422, AT24, AT3D, s3_savage, > s3_virge, s3_svga, NM2070, NM2090, NM2093, NM2097, NM2160, NM2200, > ct65520, ct65525, ct65530, ct65535, ct65540, ct65545, ct65546, > ct65548, ct65550, ct65554, ct65555, ct68554, ct69000, ct64200, > ct64300, mediagx, V1000, V2100, V2200, p9100, spc8110, i740, i740_pci, > i810, i810-dc100, i810e, Voodoo Banshee, Voodoo3, smi, generic > >Fatal server error: >xf86OpenConsole: Server must be running with root permissions >You should be using Xwrapper to start the server or xdm. >We strongly advise against making the server SUID root! > > >When reporting a problem related to a server crash, please send >the full server output, not just the last messages > >X connection to :0.0 broken (explicit kill or server shutdown). >=== [EMAIL PROTECTED] (/dev/ttyp0) /usr/home/bruno 3>>exit > --- [Quipo ISP - Questa E-mail e' stata controllata dal programma Declude Virus] [Quipo ISP - This E-mail was scanned for viruses by Declude Virus] _______________________________________________ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"