ServerWorks CSB5 ATA66/ATA100
Well, isn't that what I have?
Jason
At 01:04 PM 11/6/2003 -0800, you wrote:
Hello everyone.
Running into a bit of a problem installing 4.9 on a IBM X series server.
The server has 3 SCSI drives with a servRAID card. I have RAID 5 configured on it.
4.9 did not detect the drives, so im wondering if it even supports it or if there is a driver I can d/l to use and boot to it.
Here is some output from a second server running *coughLinuxcough*:
SvrWks CSB5: IDE controller at PCI slot 00:0f.1 SvrWks CSB5: chipset revision 147 SvrWks CSB5: not 100% native mode: will probe irqs later SvrWks CSB5: simplex device: DMA forced ide0: BM-DMA at 0x0700-0x0707, BIOS settings: hda:DMA, hdb:DMA SvrWks CSB5: simplex device: DMA forced ide1: BM-DMA at 0x0708-0x070f, BIOS settings: hdc:DMA, hdd:DMA
SCSI subsystem driver Revision: 1.00 Warning: Adapter 0 Firmware Compatible Version is MR600, but should be SA510 Warning: Adapter 0 BIOS Compatible Version is MR600, but should be SA510 Warning ! ! ! ServeRAID Version Mismatch scsi0 : IBM PCI ServeRAID 5.10.21 Vendor: IBM Model: SERVERAID Rev: 1.00 Type: Direct-Access ANSI SCSI revision: 02 Vendor: IBM Model: SERVERAID Rev: 1.00 Type: Processor ANSI SCSI revision: 02 Vendor: IBM Model: 32P0032a S320 1 Rev: 1 Type: Processor ANSI SCSI revision: 02 Attached scsi disk sda at scsi0, channel 0, id 0, lun 0
Any suggestions are appreciated.
Jason
_______________________________________________ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
_______________________________________________ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"