On Wed, Nov 12, 2003 at 02:32:20PM -0800, Noah wrote: > > > i) Make the 2nd disk an identical copy to the 1st one. In this case > > should the 1st drive go AWOL, you would have to open the case and > > either remove the first drive or modify the jumpering on the disks to > > swap their order on the bus. You will need to mark the FreeBSD slice > > bootable in the disk partition label by running: > > > > # boot0cfg -B -b /boot/mbr -s 1 da1 > > > okay this is the command I was Looking for but I am arriving at an error: > > # boot0cfg -B -b /boot/mbr -s 1 da1 > boot0cfg: /boot/mbr: unknown or incompatible boot code > > I think the partitions are about the same so I am not clear why this is happening.
Hmmm... What FreeBSD version are you using? I had assumed 4.x,
because that's what I'm using. It may well be the case that the
sample mbr has been moved somewhere else in the filesystem.
Checking the fdisk(8) and boot0cfg(8) man pages for clues doesn't
confirm that though.
The mbr should be a 512 byte file generated from the assembler sources
in /usr/src/sys/boot/i386/mbr
Cheers,
Matthew
--
Dr Matthew J Seaman MA, D.Phil. 26 The Paddocks
Savill Way
PGP: http://www.infracaninophile.co.uk/pgpkey Marlow
Tel: +44 1628 476614 Bucks., SL7 1TH UK
pgp00000.pgp
Description: PGP signature
