Redirected to -questions. ----- Original Message ----- From: "Ken Vescovi" <[EMAIL PROTECTED]> Sent: Wednesday, November 26, 2003 10:06 PM
> I finally got cable modem access here in the backwoods of west-central > PA. > > I want to set up my Dell Latitude running 4.8 as a gateway doing PAT and > using ipfw. > > I have 2, 3c589c cards and need one to get an address from the cable > company via DHCP. > > The other nic will be configured as the gateway for my home net. > > Problem one: > Card 2 is recognized, but I get this message "No free Configuration for > card 3Com corp' and no device id is assigned. > It doesn't matter which slot the card is in, it seems to only recognize > the first and give it device id ep0. > I removed the 'default' setting from pcic1 in the kernel config as > follows: > > device pcic0 at isa? irq 0 port 0x3e0 iomem 0xd0000 > device pcic1 at isa? irq 0 port 0x3e2 iomem 0xd4000 > > But it's still not recognized. Any suggestions? I don't really know about this one but I don't any changes are needed in your kernel config. You must have the right driver compiled in as it recognizes one card. If the cards aren't plug-n-play, are you sure both cards are set up to use different interrupts and memory areas? Are both cards seen in your dmesg output? > Problem 2 is how do I configure one nic for dhcp and the other for > static. I can do the static config, > but how do I config the system to have static on card 1 and dhcp on card > 2? man rc.conf and man dhclient. You use rc.conf to specify settings for each NIC and dhclient will get setup info from a DHCP server. HTH, Drew _______________________________________________ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
