On Mon, Apr 05, 2004 at 02:58:33PM +0200, Heinrich Rebehn wrote: > i am using a NEC USB2 controller and am just about to give up on using > it. I don't know if it's the controller, the disk or the ehci driver. > However, man ehci(4) states that "The driver is not finished and is > quite buggy." This seems to be true. I get all sorts of trouble ranging > from hangs during boot to system crashes. > I am reverting back to USB1 although its terribly slow. > > FreeBSD 5.2.1-RELEASE-p3 > > usb4: EHCI version 1.0 > usb4: companion controllers, 2 ports each: usb2 usb3 > usb4: <NEC uPD 720100 USB 2.0 controller> on ehci0 > usb4: USB revision 2.0 > uhub4: NEC EHCI root hub, class 9/0, rev 2.00/1.00, addr 1 > uhub4: 3 ports with 3 removable, self powered > > umass0: Maxtor OneTouch, rev 2.00/2.00, addr 2 > umass0: Get Max Lun not supported (STALLED) > GEOM: create disk da0 dp=0xc82ad450 > da0 at umass-sim0 bus 0 target 0 lun 0 > da0: <Maxtor OneTouch 0200> Fixed Direct Access SCSI-0 device > da0: 1.000MB/s transfers > da0: 239371MB (490232832 512 byte sectors: 255H 63S/T 30515C) > > Sorry i can't report anything posivtive on this.
And I can't see anything wrong with your log. -- B.Walter BWCT http://www.bwct.de [EMAIL PROTECTED] [EMAIL PROTECTED] _______________________________________________ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"