On Thursday, 27 May 2004 at 13:12:34 -0400, dave wrote: > Hello, > I've got vinum running on 5.2.1 doing raid1 on two ide drives. I was doing a > installworld in single user mode when it crashed. I was unable to use any > commands because of missing libraries not installed. I unplugged the master > drive, therew in a spare drive as master then did a minimum 5.2.1 install on > that. Then mounted my slave drive on the tempoary master drive and copied > the libraries. Once that was done i unplugged the temp drive and let the > secondary master drive boot which it did, went in to single user mode and > completed the make installworld and mergemaster. Now my secondary master > drive has the correct data, the primary does not. When i boot i'm getting: > vinum: home.p0.s0 is stale by force > vinum: usr.p0.s0 is stale by force > I'm assuming this means it can't find ad0 which is because i haven't > reconnected it. My problem is both drives are bootable, but if i plug in the > primary master drive fbsd will boot off that and it won't work. I need to be > able to boot off the secondary master drive then copy the data from the > secondary master drive to the now inconsistent primary master drive, then > reboot and all should be normal. > Not sure how to go about this, any advice appreciated.
The standard FAQ: http://www.vinumvm.org/vinum/how-to-debug.html Greg -- Note: I discard all HTML mail unseen. Finger [EMAIL PROTECTED] for PGP public key. See complete headers for address and phone numbers.
pgpCmV04mDvFP.pgp
Description: PGP signature