Tue, Jun 15, 2004 at 12:04:29PM +0200 Feczak Szabolcs <[EMAIL PROTECTED]> wrote:
> # netstat -f inet6 -rn > > Internet6: > Destination Gateway Flags Netif > Expire > ::/96 ::1 UGRS lo0 > ::1 ::1 UH lo0 > ::ffff:0.0.0.0/96 ::1 UGRS lo0 > fe80::/10 ::1 UGRS lo0 > fe80::%fxp0/64 link#1 UC fxp0 > fe80::202:b3ff:fed7:3453%fxp0 00:02:b3:d7:34:53 UHL lo0 > fe80::%lo0/64 fe80::1%lo0 U lo0 > fe80::1%lo0 link#2 UHL lo0 > ff01::/32 ::1 U lo0 > ff02::/16 ::1 UGRS lo0 > ff02::%fxp0/32 link#1 UC fxp0 > ff02::%lo0/32 ::1 UC lo0 > > # ifconfig lo0 > > lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384 > inet 127.0.0.1 netmask 0xff000000 > inet6 ::1 prefixlen 128 > inet6 fe80::1%lo0 prefixlen 64 scopeid 0x2 > > # ping6 ::1 > PING6(56=40+8+8 bytes) ::1 --> ::1 > ping6: sendmsg: No route to host > > Any hint why it is not working ? > thanks > If you can not obtain native IPv6 address, try to connect via 6to4. But, 6to4 IPv6 address depends on IPv4 address. This means that you have to reconfigure your tunnel every time after your IPv4 address changes. Regards, Byung-hee H. _______________________________________________ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"