Aggelos wrote:
I just intalled freebsd 5.2.1-RELEASE, and cannot access my floppy disk
drive, as you can see from attached dmesg.
(fdc0: cannot reserve I/O port range...)
I just realised that booting with ACPI disabled the floppy drive is
properly configured.
Copyright (c) 1992-2004 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 5.2.1-RELEASE #0: Mon Feb 23 20:45:55 GMT 2004
[EMAIL PROTECTED]:/usr/obj/usr/src/sys/GENERIC
Preloaded elf kernel "/boot/kernel/kernel" at 0xc09e3000.
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Pentium III/Pentium III Xeon/Celeron (451.02-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x673 Stepping = 3
Features=0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
real memory = 335478784 (319 MB)
avail memory = 316252160 (301 MB)
Pentium Pro MTRR support enabled
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcibios: BIOS version 2.10
Using $PIR table, 8 entries at 0xc00fdef0
pcib0: <Intel 82443BX (440 BX) host to PCI bridge> at pcibus 0 on motherboard
pci0: <PCI bus> on pcib0
pci_cfgintr: 0:7 INTD BIOS irq 10
pci_cfgintr: 0:11 INTA BIOS irq 11
pci_cfgintr: 0:19 INTA BIOS irq 11
pci_cfgintr: 0:19 INTB BIOS irq 11
agp0: <Intel 82443BX (440 BX) host to PCI bridge> mem 0xd0000000-0xd3ffffff at device
0.0 on pci0
pcib1: <PCI-PCI bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
pci1: <display, VGA> at device 0.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel PIIX4 UDMA33 controller> port 0xf000-0xf00f at device 7.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata0: [MPSAFE]
ata1: at 0x170 irq 15 on atapci0
ata1: [MPSAFE]
uhci0: <Intel 82371AB/EB (PIIX4) USB controller> port 0xd000-0xd01f irq 10 at device
7.2 on pci0
usb0: <Intel 82371AB/EB (PIIX4) USB controller> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
piix0: <PIIX Timecounter> port 0x5000-0x500f at device 7.3 on pci0
Timecounter "PIIX" frequency 3579545 Hz quality 0
xl0: <3Com 3c905B-TX Fast Etherlink XL> port 0-0x7f irq 11 at device 11.0 on pci0
xl0: reset didn't complete
xl0: command never completed!
xl0: command never completed!
xl0: eeprom failed to come ready
xl0: failed to read station address
device_probe_and_attach: xl0 attach returned 6
atapci1: <HighPoint HPT366 UDMA66 controller> port
0xe000-0xe0ff,0xdc00-0xdc03,0xd800-0xd807 irq 11 at device 19.0 on pci0
atapci1: [MPSAFE]
ata2: at 0xd800 on atapci1
ata2: [MPSAFE]
atapci2: <HighPoint HPT366 UDMA66 controller> port
0xec00-0xecff,0xe800-0xe803,0xe400-0xe407 irq 11 at device 19.1 on pci0
atapci2: [MPSAFE]
ata3: at 0xe400 on atapci2
ata3: [MPSAFE]
orm0: <Option ROMs> at iomem 0xd0000-0xd17ff,0xc0000-0xcffff on isa0
pmtimer0 on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x64,0x60 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model IntelliMouse, device ID 3
fdc0: <Enhanced floppy controller (i82077, NE72065 or clone)> at port
0x3f7,0x3f0-0x3f5 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/16 bytes threshold
ppbus0: <Parallel port bus> on ppc0
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
unknown: <PNP0303> can't assign resources (port)
unknown: <PNP0a03> can't assign resources (port)
unknown: <PNP0f13> can't assign resources (irq)
unknown: <PNP0501> can't assign resources (port)
unknown: <PNP0700> can't assign resources (port)
unknown: <PNP0401> can't assign resources (port)
unknown: <PNP0501> can't assign resources (port)
Timecounter "TSC" frequency 451024601 Hz quality 800
Timecounters tick every 10.000 msec
GEOM: create disk ad0 dp=0xc341d860
ad0: 4121MB <Maxtor 90432D2> [8374/16/63] at ata0-master UDMA33
GEOM: create disk ad1 dp=0xc34b3b60
ad1: 3079MB <QUANTUM FIREBALL ST3.2A> [6256/16/63] at ata0-slave UDMA33
acd0: CDROM <CD-532E-B> at ata1-master PIO4
GEOM: create disk ad4 dp=0xc34b3160
ad4: 19092MB <WDC WD200EB-00CSF0> [38792/16/63] at ata2-master UDMA66
GEOM: create disk ad6 dp=0xc341e760
ad6: 8063MB <QUANTUM FIREBALL CR8.4A> [16383/16/63] at ata3-master UDMA66
Mounting root from ufs:/dev/ad1s1a
_______________________________________________
[EMAIL PROTECTED] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to "[EMAIL PROTECTED]"
