When I boot the machine with the -v option it boots up completely. I can provide you with the dmesg if needed. So, what do you think could be reason for that? is it stable enough to run as a production server.
-Pranav On Tue, 20 Jul 2004 06:28:23 -0700 (PDT), Pranav <[EMAIL PROTECTED]> wrote: > Hello All, > > I am trying to run FreeBSD 4.9 on a server that has > 4x146GB ultra > 320 SCSI drives. The motherboard is a Tyan S2720 with > an Adaptec 7902 > Ultra 320 onboard. (Also tried it with 4x73GB drives). > > The systems works fine when there are 3 drives in the > system. As, soon > as I plug in the 4th drive and boot the system in > starts to 'dump card > state' after the > 'waiting for 15 secs for scsi devices to settle' line > and never boots > up completely. It just repeats dumps card state. > > I then loaded FreeBSD 5.2.1-REL and even that dumps > card state, but it > boots up fine. > I have included the dmesg in the mail. (Sorry for > including > everything. I didnt know what might be important). > > I havent changed anything in the kernel, its a > standard install. > > Does anyone have any clue as to why this could be > happening on 4.9. Am > I missing some parameter or something here. > > Or, is it possible to load the 5.2.1 ahd driver on > 4.9. If so can > somebody give some instructions on how to do that. > > I would appreciate any kind of help. Please let me > know if you want me > to do anything else or provide any other information. > > Thanks > -Pranav > > dmesg output on 5.2.1 > ---------------------------- > Copyright (c) 1992-2004 The FreeBSD Project. > Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, > 1991, 1992, 1993, 1994 > The Regents of the University of California. > All rights reserved. > FreeBSD 5.2.1-RELEASE #0: Mon Feb 23 20:45:55 GMT 2004 > > [EMAIL PROTECTED]:/usr/obj/usr/src/sys/GENERIC > Preloaded elf kernel "/boot/kernel/kernel" at > 0xc0a35000. > Preloaded elf module "/boot/kernel/acpi.ko" at > 0xc0a3526c. > ACPI APIC Table: <A M I OEMAPIC > > Timecounter "i8254" frequency 1193182 Hz quality 0 > CPU: Intel(R) Xeon(TM) CPU 2.80GHz (2799.22-MHz > 686-class CPU) > Origin = "GenuineIntel" Id = 0xf25 Stepping = 5 > > Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> > Hyperthreading: 2 logical CPUs > real memory = 4160684032 (3967 MB) > avail memory = 4044111872 (3856 MB) > FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs > cpu0 (BSP): APIC ID: 0 > cpu1 (AP): APIC ID: 1 > ioapic0 <Version 2.0> irqs 0-23 on motherboard > ioapic1 <Version 2.0> irqs 24-47 on motherboard > ioapic2 <Version 2.0> irqs 48-71 on motherboard > Pentium Pro MTRR support enabled > npx0: [FAST] > npx0: <math processor> on motherboard > npx0: INT 16 interface > acpi0: <A M I OEMRSDT > on motherboard > pcibios: BIOS version 2.10 > Using $PIR table, 14 entries at 0xc00f2fb0 > acpi0: Power Button (fixed) > Timecounter "ACPI-fast" frequency 3579545 Hz quality > 1000 > acpi_timer0: <24-bit timer at 3.579545MHz> port > 0x408-0x40b on acpi0 > acpi_cpu0: <CPU> on acpi0 > acpi_cpu1: <CPU> on acpi0 > acpi_cpu2: <CPU> on acpi0 > device_probe_and_attach: acpi_cpu2 attach returned 6 > acpi_cpu2: <CPU> on acpi0 > device_probe_and_attach: acpi_cpu2 attach returned 6 > pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on > acpi0 > pci0: <ACPI PCI bus> on pcib0 > pcib1: <ACPI PCI-PCI bridge> at device 2.0 on pci0 > pcib1: could not get PCI interrupt routing table for > \\_SB_.PCI0.P0P2 > - AE_NOT_FOUND > pci2: <ACPI PCI bus> on pcib1 > pci2: <base peripheral, interrupt controller> at > device 28.0 (no > driver attached) > pcib2: <ACPI PCI-PCI bridge> at device 29.0 on pci2 > pci4: <ACPI PCI bus> on pcib2 > em0: <Intel(R) PRO/1000 Network Connection, Version - > 1.7.19> port > 0xc000-0xc03f mem 0xfe980000-0xfe99ffff irq > 48 at device 1.0 on pci4 > em0: Speed:N/A Duplex:N/A > em1: <Intel(R) PRO/1000 Network Connection, Version - > 1.7.19> port > 0xc400-0xc43f mem 0xfe9c0000-0xfe9dffff irq > 53 at device 1.1 on pci4 > em1: Speed:N/A Duplex:N/A > ahd0: <Adaptec AIC7902 Ultra320 SCSI adapter> port > 0xc800-0xc8ff,0xd000-0xd0ff mem 0xfe9fc000-0xfe9fdfff > irq 50 at device > 4.0 on pci4 > aic7902: Ultra320 Wide Channel A, SCSI Id=7, PCI 33 or > 66Mhz, 512 SCBs > ahd1: <Adaptec AIC7902 Ultra320 SCSI adapter> port > 0xd400-0xd4ff,0xd800-0xd8ff mem 0xfe9fe000-0xfe9fffff > irq 51 at device > 4.1 on pci4 > aic7902: Ultra320 Wide Channel B, SCSI Id=7, PCI 33 or > 66Mhz, 512 SCBs > pci2: <base peripheral, interrupt controller> at > device 30.0 (no > driver attached) > pcib3: <ACPI PCI-PCI bridge> at device 31.0 on pci2 > pci3: <ACPI PCI bus> on pcib3 > uhci0: <Intel 82801CA/CAM (ICH3) USB controller USB-A> > port > 0xe800-0xe81f irq 16 at device 29.0 on pci0 > usb0: <Intel 82801CA/CAM (ICH3) USB controller USB-A> > on uhci0 > usb0: USB revision 1.0 > uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, > addr 1 > uhub0: 2 ports with 2 removable, self powered > pcib4: <ACPI PCI-PCI bridge> at device 30.0 on pci0 > pci1: <ACPI PCI bus> on pcib4 > pci1: <display, VGA> at device 2.0 (no driver > attached) > fxp0: <Intel 82551 Pro/100 Ethernet> port > 0xa400-0xa43f mem > 0xfe4a0000-0xfe4bffff,0xfe4fe000-0xfe4fefff irq 17 > at device 3.0 on pci1 > fxp0: Ethernet address 00:e0:81:27:ce:99 > miibus0: <MII bus> on fxp0 > inphy0: <i82555 10/100 media interface> on miibus0 > inphy0: 10baseT, 10baseT-FDX, 100baseTX, > 100baseTX-FDX, auto > isab0: <PCI-ISA bridge> at device 31.0 on pci0 > isa0: <ISA bus> on isab0 > atapci0: <Intel ICH3 UDMA100 controller> port > 0xffa0-0xffaf,0-0x3,0-0x7,0-0x3,0-0x7 at device 31.1 > on pci0 > ata0: at 0x1f0 irq 14 on atapci0 > ata0: [MPSAFE] > ata1: at 0x170 irq 15 on atapci0 > ata1: [MPSAFE] > pci0: <serial bus, SMBus> at device 31.3 (no driver > attached) > acpi_button0: <Power Button> on acpi0 > acpi_button1: <Sleep Button> on acpi0 > atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 > irq 1 on acpi0 > atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0 > kbd0 at atkbd0 > sio0: configured irq 4 not in bitmap of probed irqs 0 > sio0: port may not be enabled > sio0 port 0x3f8-0x3ff irq 4 on acpi0 > sio0: type 16550A > sio1: configured irq 3 not in bitmap of probed irqs 0 > sio1: port may not be enabled > sio1 port 0x2f8-0x2ff irq 3 on acpi0 > sio1: type 16550A > fdc0: <Enhanced floppy controller (i82077, NE72065 or > clone)> port > 0x3f7,0x3f0-0x3f5 irq 6 drq 2 on acpi0 > ppc0 port 0x378-0x37f irq 7 on acpi0 > ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode > ppbus0: <Parallel port bus> on ppc0 > plip0: <PLIP network interface> on ppbus0 > lpt0: <Printer> on ppbus0 > lpt0: Interrupt-driven port > ppi0: <Parallel I/O> on ppbus0 > acpi_cpu2: <CPU> on acpi0 > device_probe_and_attach: acpi_cpu2 attach returned 6 > acpi_cpu2: <CPU> on acpi0 > device_probe_and_attach: acpi_cpu2 attach returned 6 > orm0: <Option ROMs> at iomem > 0xd0800-0xd1fff,0xc0000-0xc7fff on isa0 > pmtimer0 on isa0 > sc0: <System console> at flags 0x100 on isa0 > sc0: VGA <16 virtual consoles, flags=0x300> > vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem > 0xa0000-0xbffff on isa0 > Timecounters tick every 10.000 msec > acpi_cpu: throttling enabled, 8 steps (100% to 12.5%), > currently 100.0% > acd0: CDROM <CD-224E> at ata0-slave PIO4 > Waiting 15 seconds for SCSI devices to settle > ahd0: Invalid Sequencer interrupt occurred. > >>>>>>>>>>>>>>>>>> Dump Card State Begins > <<<<<<<<<<<<<<<<< > ahd0: Dumping Card State at program address 0x216 Mode > 0x0 > Card was paused > HS_MAILBOX[0x0] INTCTL[0x80]:(SWTMINTMASK) > SEQINTSTAT[0x0] > SAVED_MODE[0x11] > DFFSTAT[0x33]:(CURRFIFO_NONE|FIFO0FREE|FIFO1FREE) > SCSISIGI[0x0]:(P_DATAOUT) SCSIPHASE[0x0] SCSIBUS[0x0] > LASTPHASE[0x1]:(P_DATAOUT|P_BUSFREE) SCSISEQ0[0x0] > SCSISEQ1[0x12]:(ENAUTOATNP|ENRSELI) SEQCTL0[0x0] > SEQINTCTL[0x6]:(INTMASK1|INTMASK2) > SEQ_FLAGS[0x0] SEQ_FLAGS2[0x0] SSTAT0[0x0] SSTAT1[0x0] > SSTAT2[0x0] SSTAT3[0x0] PERRDIAG[0x0] > SIMODE1[0xa4]:(ENSCSIPERR|ENSCSIRST|ENSELTIMO) > LQISTAT0[0x0] LQISTAT1[0x0] LQISTAT2[0x0] > LQOSTAT0[0x0] > LQOSTAT1[0x0] LQOSTAT2[0x0] > > SCB Count = 16 CMDS_PENDING = 1 LASTSCB 0xffff CURRSCB > 0xf NEXTSCB 0xff40 > qinstart = 41 qinfifonext = 42 > QINFIFO: 0xe > WAITING_TID_QUEUES: > 2 ( 0xd ) > Pending list: > 14 FIFO_USE[0x0] SCB_CONTROL[0x40]:(DISCENB) > SCB_SCSIID[0x17] > 13 FIFO_USE[0x0] SCB_CONTROL[0x40]:(DISCENB) > SCB_SCSIID[0x27] > Total 2 > Kernel Free SCB list: 15 12 1 2 3 4 5 6 7 8 9 10 11 0 > Sequencer Complete DMA-inprog list: > Sequencer Complete list: > Sequencer DMA-Up and Complete list: > > ahd0: FIFO0 Free, LONGJMP == 0x8000, SCB 0xc > SEQIMODE[0x3f]:(ENCFG4TCMD|ENCFG4ICMD|ENCFG4TSTAT|ENCFG4ISTAT|ENCFG4DATA|ENSAVEPTRS) > SEQINTSRC[0x0] DFCNTRL[0x0] > DFSTATUS[0x89]:(FIFOEMP|HDONE|PRELOAD_AVAIL) > SG_CACHE_SHADOW[0x2]:(LAST_SEG) SG_STATE[0x0] > DFFSXFRCTL[0x0] > SOFFCNT[0x0] MDFFSTAT[0x5]:(FIFOFREE|DLZERO) SHADDR = > 0x00, SHCNT = 0x0 > HADDR = 0x00, HCNT = 0x0 > CCSGCTL[0x10]:(SG_CACHE_AVAIL) > ahd0: FIFO1 Free, LONGJMP == 0x806c, SCB 0xf > SEQIMODE[0x3f]:(ENCFG4TCMD|ENCFG4ICMD|ENCFG4TSTAT|ENCFG4ISTAT|ENCFG4DATA|ENSAVEPTRS) > SEQINTSRC[0x0] DFCNTRL[0x0] > DFSTATUS[0x89]:(FIFOEMP|HDONE|PRELOAD_AVAIL) > SG_CACHE_SHADOW[0x2]:(LAST_SEG) SG_STATE[0x0] > DFFSXFRCTL[0x0] > SOFFCNT[0x0] MDFFSTAT[0x5]:(FIFOFREE|DLZERO) SHADDR = > 0x00, SHCNT = 0x0 > HADDR = 0x00, HCNT = 0x0 > CCSGCTL[0x10]:(SG_CACHE_AVAIL) > LQIN: 0x8 0x0 0x0 0xc 0x0 0x1 0x0 0x0 0x0 0x0 0x0 0x0 > 0x0 0x0 0x0 0x0 > 0x0 0x0 0x0 0x0 > ahd0: LQISTATE = 0x0, LQOSTATE = 0x0, OPTIONMODE = > 0x52 > ahd0: OS_SPACE_CNT = 0x20 MAXCMDCNT = 0x1 > > SIMODE0[0xc]:(ENOVERRUN|ENIOERR) > CCSCBCTL[0x4]:(CCSCBDIR) > ahd0: REG0 == 0xc60, SINDEX = 0x10e, DINDEX = 0x108 > ahd0: SCBPTR == 0xc, SCB_NEXT == 0xff40, SCB_NEXT2 == > 0xf > CDB 12 20 0 80 8 32 > STACK: 0x211 0x2 0x0 0x0 0x0 0x0 0x0 0x0 > >>>>>>>>>>>>>>>>> > GEOM: create disk da0 dp=0xcb64f850 > GEOM: create disk da1 dp=0xcb64f450 > GEOM: create disk da2 dp=0xcb648050 > GEOM: create disk da3 dp=0xcb64fc50 > Copied 18 bytes of sense data offset 12: 0x70 0x0 0x6 > 0x0 0x0 0x0 0x0 > 0xa 0x0 0x0 0x0 0x0 0x29 0x2 0x2 0x0 0x0 > 0x0 > SMP: AP CPU #1 Launched! > Copied 18 bytes of sense data offset 12: 0x70 0x0 0x6 > 0x0 0x0 0x0 0x0 > 0xa 0x0 0x0 0x0 0x0 0x29 0x2 0x2 0x0 0x0 > 0x0 > Copied 18 bytes of sense data offset 12: 0x70 0x0 0x6 > 0x0 0x0 0x0 0x0 > 0xa 0x0 0x0 0x0 0x0 0x29 0x2 0x2 0x0 0x0 > 0x0 > Copied 18 bytes of sense data offset 12: 0x70 0x0 0x6 > 0x0 0x0 0x0 0x0 > 0xa 0x0 0x0 0x0 0x0 0x29 0x2 0x2 0x0 0x0 > 0x0 > da0 at ahd0 bus 0 target 0 lun 0 > da0: <SEAGATE ST3146807LC 0006> Fixed Direct Access > SCSI-3 device > da0: 320.000MB/s transfers (160.000MHz, offset 63, > 16bit), Tagged > Queueing Enabled > da0: 140014MB (286749488 512 byte sectors: 255H 63S/T > 17849C) > da1 at ahd0 bus 0 target 1 lun 0 > da1: <SEAGATE ST3146807LC 0006> Fixed Direct Access > SCSI-3 device > da1: 320.000MB/s transfers (160.000MHz, offset 63, > 16bit), Tagged > Queueing Enabled > da1: 140014MB (286749488 512 byte sectors: 255H 63S/T > 17849C) > da3 at ahd0 bus 0 target 3 lun 0 > da3: <SEAGATE ST3146807LC 0006> Fixed Direct Access > SCSI-3 device > da3: 320.000MB/s transfers (160.000MHz, offset 63, > 16bit), Tagged > Queueing Enabled > da3: 140014MB (286749488 512 byte sectors: 255H 63S/T > 17849C) > da2 at ahd0 bus 0 target 2 lun 0 > da2: <SEAGATE ST3146807LC 0006> Fixed Direct Access > SCSI-3 device > da2: 320.000MB/s transfers (160.000MHz, offset 63, > 16bit), Tagged > Queueing Enabled > da2: 140014MB (286749488 512 byte sectors: 255H 63S/T > 17849C) > Mounting root from ufs:/dev/da0s1a > em0: Link is up 10 Mbps Half Duplex > > __________________________________ > Do you Yahoo!? > New and Improved Yahoo! Mail - Send 10MB messages! > http://promotions.yahoo.com/new_mail > _______________________________________________ > [EMAIL PROTECTED] mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-questions > To unsubscribe, send any mail to "[EMAIL PROTECTED]" > _______________________________________________ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"