Hello, I've been trying to get my Samsung ML-1710 running under FreeBSD with CUPS. Installation of everything seems to have gone o.k., but I can't print a test page. I looked in the log file and got:
D [22/Sep/2004:12:50:55 -0400] start_process("/usr/local/libexec/cups/backend/us b", 0xbfbf0330, 0xbfbef6a0, 12, 13, 11) I [22/Sep/2004:12:50:55 -0400] Started backend /usr/local/libexec/cups/backend/u sb (PID 242) for job 5. D [22/Sep/2004:12:50:55 -0400] ProcessIPPRequest: 5 status_code=0 E [22/Sep/2004:12:50:55 -0400] PID 241 stopped with status 2! Running /usr/local/libexec/cups/backend/usb manually gives: aleph# /usr/local/libexec/cups/backend/usb direct usb:/dev/ulpt0 "Unknown" "USB Printer #1" direct usb:/dev/unlpt0 "Unknown" "USB Printer #1 (no reset)" Anyone know what this means/what I should do? Here's everything from dmesg which may be relevant: pcib0: <Host to PCI bridge> on motherboard pci0: <PCI bus> on pcib0 agp0: <VIA Generic host to PCI bridge> mem 0xe0000000-0xe3ffffff at device 0.0 on pci0 pcib1: <PCI to PCI bridge (vendor=1106 device=b112)> at device 1.0 on pci0 pci1: <PCI bus> on pcib1 pci1: <Trident model 8500 VGA-compatible display device> at 0.0 irq 10 uhci0: <VIA 83C572 USB controller> port 0xc400-0xc41f irq 11 at device 7.2 on pci0 usb0: <VIA 83C572 USB controller> on uhci0 usb0: USB revision 1.0 uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered ulpt0: Samsung Electronics Co., Ltd. Samsung ML-1710, rev 1.10/1.00, addr 2, iclass 7/1 uhci1: <VIA 83C572 USB controller> port 0xc800-0xc81f irq 11 at device 7.3 on pci0 usb1: <VIA 83C572 USB controller> on uhci1 usb1: USB revision 1.0 uhub1: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub1: 2 ports with 2 removable, self powered pci0: <unknown card> (vendor=0x1106, dev=0x3057) at 7.4 pcm0: <VIA VT82C686A> port 0xd400-0xd403,0xd000-0xd003,0xcc00-0xccff irq 11 at device 7.5 on pci0 pcm0: <Avance Logic ALC200 AC97 Codec> pci0: <VGA-compatible display device> at 8.0 irq 10 pcm1: <AudioPCI ES1373-B> port 0xdc00-0xdc3f irq 9 at device 9.0 on pci0 pcm1: <TriTech TR28023 AC97 Codec> rl0: <RealTek 8139 10/100BaseTX> port 0xe000-0xe0ff mem 0xe9020000-0xe90200ff irq 11 at device 11.0 on pci0 ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0 ppc0: Generic chipset (EPP/NIBBLE) in COMPATIBLE mode lpt0: <Printer> on ppbus0 lpt0: Interrupt-driven port ppi0: <Parallel I/O> on ppbus0 Printer page in the admin tool says: Samsung ML-1710 Foomatic/gdi (recommended) Description: Samsung ML1710 Location: localhost Printer State: idle, accepting jobs. Device URI: usb:/dev/ulpt0 Hopefully that's enough info. Thanks! -Justin Brody _______________________________________________ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"