On Wed, 22 Dec 2004 11:00:32 -0600, Bagus <[EMAIL PROTECTED]> wrote: > > > >ping freebsd.org > > > ping: cannot resolve freebsd.org: Host name lookup failure. > > > Hostname lookup failure sounds like a dns problem to me. > > Is there anything in /etc/resolv.conf ? > > No, there is not even a /etc/resolve.conf. What should go in there? > >How is fxp0 assigned an IP? DHCP? > I think so. That's the way it should be. > > > If so, do you have a line like the following in /etc/rc.conf: > > ifconfig_fxp0="DHCP" > > That line was not in there. I added it and rebooted. The boot process now > started the dhcp client, but still no actual ip address is reported in the > ifconfig. > > > > How did you setup the Linksys? Default (out-of-the-box) settings? > > plugged it in, plugged cable modem into uplink, plugged this pc into one > outlet, the freebsd box into another. PC works fine. Lights indicate > connectivity to bsd box. > > > Is the DHCP server turned on at the router? What does the status > > page of the router settings show? > > > > That's supposed to be http://192.168.1.1, isn't it? I can't access that even > from my pc. Any advice there would be helpful. BTW, I'm using Cox as a > ISP.
You can set fxp0 to use a static IP until you get the router working. # ifconfig fxp0 inet 192.168.1.2 netmask 255.255.255.0 # route add default 192.168.1.1 In /etc/rc.conf, you should have: ifconfig_fxp0="DHCP" defaultrouter="192.168.1.1" You should be able to login to the Linksys admin page: http://192.168.1.1 AFAIK, most of the Linksys home networking devices use a blank username and password 'admin' by default. Make sure that the DHCP server is enabled, and restart. HTH, -- Joshua Lokken Open Source Advocate _______________________________________________ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"