On 01/01/05 01:13 PM, Trey Sizemore sat at the `puter and typed: > On Sat, 2005-01-01 at 12:53 -0500, Louis LeBlanc wrote: > > > I have that same model. I never bothered to try hooking it directly > > to the USB port. The camera uses CompactFlash cards, so I picked up a > > SanDisk USB reader (Sandisk PN: SDDR-31) and hooked it to the USB > > port. All I needed in the kernel config was the umass device, which > > it sounds like you already have. > > > > Then I just mount the inserted card as a dos partition (usually > > /dev/da0s1) and I can move pics to my filesystem (mv, not cp). This cleans > > out the card and preserves the timestamp on the file, so I don't have > > to otherwise mar my pic with an auto date label to know when I took > > it. > > > > Another advantage, is you can buy a couple cards, and the camera isn't > > tied down for the upload. > > > > What may (or may not) be related, is that I have to have the reader > > mounted prior to boot, or the /dev/da0 device doesn't show in the /dev > > partition. When the card in inserted, it's detected and the > > /dev/da0s1 device appears. There may be a way to get the USB device > > to rescan, but I'm not that fluent with USB. > > > > I had the same setup on FreeBSD versions, 4.8, 4.9, 4.10, and now 5.3 > > RELEASE. Works like a charm. And yes, I bought mine way back when it > > cost a good months rent :| > > > > Good luck. > > Lou > > Months rent...same here ;-) > > I have a SanDisk reader as well. Are you saying you plug the card in > the SanDisk reader and *then* boot? It won't work "on-the-fly"?
No, my reader has to be plugged in at boot, but inserting the card works on the fly. Your device may be different, but mine has always been /dev/da0s1 for the card itself. The /dev partition is pretty manageable in 5.3, so you might try an ls /dev and look for /dev/da0*. It might just jump out at you. I do an ls before inserting the card, and I see da0, but not da0s1. After inserting the card, da0s1 is there. Sometimes it's instantaneous, other times it takes a couple attempts to mount, but it works. Perhaps someone else on the list will know how to get the reader detected on the fly without a reboot, or perhaps the command to check the reader for an inserted card? I had thought camcontrol was it, but it doesn't seem to recognize that the card was removed. Lou -- Louis LeBlanc [EMAIL PROTECTED] Fully Funded Hobbyist, KeySlapper Extrordinaire :) http://www.keyslapper.org ԿԬ Captain's Log, star date 21:34.5... _______________________________________________ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"