Sergei Gnezdov wrote:
Hi,
I am using Asus A7N8X Rev 1.06 motherboard on FreeBSD 5.3 release. I
want to use my USB hard drive. It would be the first USB device I use.
What is the procedure?
Here is what seems to be a related dmesg output:
usb0: OHCI version 1.0, legacy support
usb0: <OHCI (generic) USB controller> on ohci0
usb0: USB revision 1.0
usb1: OHCI version 1.0, legacy support
usb1: <OHCI (generic) USB controller> on ohci1
usb1: USB revision 1.0
umass0: Western Digital USB Hard Drive, rev 2.00/11.05, addr 3
da0 at umass-sim0 bus 0 target 0 lun 0
da0: <WDC WD12 00BB-00DAA3 75.1> Fixed Direct Access SCSI-0 device
da0: 1.000MB/s transfers
da0: 114473MB (234441648 512 byte sectors: 255H 63S/T 14593C)
I think the drive is probably NTFS formatted. If it is not NTFS it is
FAT32.
I don't remember the drive specs, but it can do better than USB 1.0.
Well, can't you mount it?
if it is fat 32
mount_msdosfs /dev/da0s1 /mnt/
if it is ntfs
mount_ntfs /dev/da0s1 /mnt/
good luck!
--
Gustaaf Wijnands
_______________________________________________
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to "[EMAIL PROTECTED]"
