That's what the kernel tells me during boot: ath0: <Atheros 5212> mem 0xde100000-0xde10ffff irq 5 at device 9.0 on pci0 ath0: mac 5.9 phy 4.3 5ghz radio 4.6 ath0: Ethernet address: 00:0f:3d:ab:9a:b6 ath0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps ath0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
Mine is also identified as the 5212. But I saw that my hardware version is B2 and the firmware versionn is 3.1.6. You do not seem to be the only one with your problem: This guy gets the same message as you did, but it is supposed to be fixed: http://lists.freebsd.org/pipermail/freebsd-current/2003-November/014227.html According to this link an European B3 does not work with linux either: http://madwifiwiki.thewebhost.de/wiki/DLinkDWLG520 sysctl dev.ath dev.ath.0.%desc: Atheros 5212 dev.ath.0.%driver: ath dev.ath.0.%location: slot=9 function=0 dev.ath.0.%pnpinfo: vendor=0x168c device=0x0013 subvendor=0x1186 subdevice=0x3a13 class=0x020000 dev.ath.0.%parent: pci0 BTW: Are you German? I just wondered because your SSID was "deutschland" in your initial posting. _______________________________________________ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"