On Tuesday 25 January 2005 02:34, [EMAIL PROTECTED] wrote: > Hi, > > I'm trying to make my TV-card work on my box, using FBSD-5.3-STABLE. > > For this I put the following lines in my Kernel config. file: > ........ > device bktr > device iicbus > device iicbb > device smbus > > compiled the new kernel, installed it and rebooted. But dmesg shows nothing > corresponding to these lines nor are the devices present in /dev/ > > Can anybody give me an idea how to get to problem solved ?? > > Responses are very apreciated.
I have this in my /etc/devfs.conf: perm cd0 0660 perm cd1 0660 perm da0s1 0660 perm da1s1 0660 perm xpt0 0660 perm xpt1 0660 perm pass0 0660 perm pass1 0660 perm pass2 0660 perm pass3 0660 perm lpt0 0660 perm bktr0 0660 perm tuner0 0660 perm cuaa0 0660 Everyting up to lpt is for using atacam functionality (e.g. CD burning). Bktr and tuner are for the capture card (I have an old Miro Bt848). And the /boot/loader.conf has: sound_load="YES" snd_emu10k1_load="YES" nvidia_load="YES" bktr_load="YES" linux_load="YES" So here I load the bktr module upon booting. I don't use any special kernel config for bktr (I have other options for other hardware). As far as detecting your card, try pciconf -l or -lv. Also dmesg can show you what it has detected and done so far. My card because it's so old needs some PnP probing but even that works. Kldstat shows which modules are loaded. HTH Dan > > Regards, > > Carlo. > > _______________________________________________ > freebsd-questions@freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-questions > To unsubscribe, send any mail to > "[EMAIL PROTECTED]" _______________________________________________ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
