> Hope this helps someone. I'm not at all sure > where/what the problem is but > I'll be happy to run on the embedded controller for > the time being. (while > PIO 4 != DMA 133, reliability/functionality is king!)
Neither have I an idea what going on here, but after having upgraded a few PCs from 4.10 to 5.3, I empirically deduced following conclusions: 1) The problems is since 5.3, not with any 4.X. 2) Such problems occur when the media (harddisk in my case) are capable of doing a higher speed than the motherboard. For example, harddisk can do maximum UDMA100, but motherboard can maximum handle UDMA66. In such cases I need hw.ata.ata_dma="0" in loader.conf, which slows down the speed to PIO4. Without the hw.ata.ata_dma="0", I get various results, which can be 'kernel panic at bootup after installation' on one PC, to 'odd crashing of X for no good reason' on another PC. When the maximum speeds of harddisk and motherboard match, there's no problem, eventhough they may both operate at a lower than maximum speed. Something really uggly has entered the code of 5.3, with respect to disk speed matching, I believe. Regards, Rob. __________________________________ Do you Yahoo!? Yahoo! Mail - 250MB free storage. Do more. Manage less. http://info.mail.yahoo.com/mail_250 _______________________________________________ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"