Hello all,
After a cvsup yesterday I have run into the following problem when running either make index or portsdb -uU:
Generating INDEX-5 - please wait..fr-mozilla-flp-1.7.5_1: "/usr/ports/www/mozilla-devel-gtk2" non-existent -- dependency list incomplete
===> french/mozilla-flp failed
*** Error code 1
******************************************************************** Before reporting this error, verify that you are running a supported version of FreeBSD (see http://www.FreeBSD.org/ports/) and that you have a complete and up-to-date ports collection. (INDEX builds are not supported with partial or out-of-date ports collections -- in particular, if you are using cvsup, you must cvsup the "ports-all" collection, and have no "refuse" files.) If that is the case, then report the failure to [EMAIL PROTECTED] together with relevant details of your ports configuration (including FreeBSD version, your architecture, your environment, and your /etc/make.conf settings, especially compiler flags and WITH/WITHOUT settings).
Note: the latest pre-generated version of INDEX may be fetched automatically with "make fetchindex". ********************************************************************
*** Error code 1
Stop in /usr/ports. *** Error code 1
Stop in /usr/ports.
I have already googled for this problem and came up with the thread: http://lists.freebsd.org/pipermail/freebsd-questions/2004-July/051719.html
but all the solutions offered there are no help. I have run cvsup multiple times and have no refuse files. I also do not have mozilla-devel-gtk installed (I have no mozilla anything installed the reason why is another story though).
the output of uname -a is:
FreeBSD pc078650.sci.griffith.edu.au 5.3-RELEASE-p1 FreeBSD 5.3-RELEASE-p1 #7: Tue Nov 23 11:49:52 EST 2004 [EMAIL PROTECTED]:/usr/obj/usr/src/sys/KERNCONF i386
the output of find / -iname refuse is: /usr/share/examples/cvsup/refuse /usr/src/share/examples/cvsup/refuse
the output of pkg_info | grep moz is: (empty)
the output of find / -iname moz | less is: (empty)
my make.conf file is (essentially a copy of the example):
# $FreeBSD: src/share/examples/etc/make.conf,v 1.229.2.5 2004/10/09 18:38:57 dougb Exp $
#
# NOTE: Please would any committer updating this file also update the
# make.conf(5) manual page, if necessary, which is located in
# src/share/man/man5/make.conf.5.
#
# /etc/make.conf, if present, will be read by make (see
# /usr/share/mk/sys.mk). It allows you to override macro definitions
# to make without changing your source tree, or anything the source
# tree installs.
#
# This file must be in valid Makefile syntax.
#
# There are additional things you can put into /etc/make.conf.
# You have to find those in the Makefiles and documentation of
# the source tree.
#
# Note, that you should not set MAKEOBJDIRPREFIX or MAKEOBJDIR
# from make.conf (or as command line variables to make).
# Both variables are environment variables for make and must be used as:
#
# env MAKEOBJDIRPREFIX=/big/directory make
#
#
# The CPUTYPE variable controls which processor should be targeted for
# generated code. This controls processor-specific optimizations in
# certain code (currently only OpenSSL) as well as modifying the value
# of CFLAGS to contain the appropriate optimization directive to gcc.
# The automatic setting of CFLAGS may be overridden using the
# NO_CPU_CFLAGS variable below.
# Currently the following CPU types are recognized:
# Intel x86 architecture:
# (AMD CPUs) athlon-mp athlon-xp athlon-4 athlon-tbird athlon k6-3
# k6-2 k6 k5
# (Intel CPUs) p4 p3 p2 i686 i586/mmx i586 i486 i386
# Alpha/AXP architecture: ev67 ev6 pca56 ev56 ev5 ev45 ev4
# Intel ia64 architecture: itanium
#
# (?= allows to buildworld for a different CPUTYPE.)
#
#CPUTYPE?=p4
#NO_CPU_CFLAGS= true # Don't add -march=<cpu> to CFLAGS automatically
#NO_CPU_COPTFLAGS=true # Don't add -march=<cpu> to COPTFLAGS automatically
#
# CFLAGS controls the compiler settings used when compiling C code.
# Note that optimization settings other than -O and -O2 are not recommended
# or supported for compiling the world or the kernel - please revert any
# nonstandard optimization settings to "-O" before submitting bug reports
# without patches to the developers.
# Note also that at this time the -O2 setting is known to expose bugs in
# libalias(3), and possibly other parts of the system.
#
#CFLAGS= -O -pipe
#
# CXXFLAGS controls the compiler settings used when compiling C++ code.
# Note that CXXFLAGS is initially set to the value of CFLAGS. If you wish
# to add to CXXFLAGS value, "+=" must be used rather than "=". Using "="
# alone will remove the often needed contents of CFLAGS from CXXFLAGS.
#
#CXXFLAGS+= -fmemoize-lookups -fsave-memoized
#
# MAKE_SHELL controls the shell used internally by make(1) to process the
# command scripts in makefiles. Three shells are supported, sh, ksh, and
# csh. Using sh is most common, and advised. Using ksh *may* work, but is
# not guaranteed to. Using csh is absurd. The default is to use sh.
#
#MAKE_SHELL?=sh
#
# BDECFLAGS are a set of gcc warning settings that Bruce Evans has suggested
# for use in developing FreeBSD and testing changes. They can be used by
# putting "CFLAGS+=${BDECFLAGS}" in /etc/make.conf. -Wconversion is not
# included here due to compiler bugs, e.g., mkdir()'s mode_t argument.
#
#BDECFLAGS= -W -Wall -ansi -pedantic -Wbad-function-cast -Wcast-align \
# -Wcast-qual -Wchar-subscripts -Winline \
# -Wmissing-prototypes -Wnested-externs -Wpointer-arith \
# -Wredundant-decls -Wshadow -Wstrict-prototypes -Wwrite-strings
#
# To compile just the kernel with special optimizations, you should use
# this instead of CFLAGS (which is not applicable to kernel builds anyway).
# There is very little to gain by using higher optimization levels, and doing
# so can cause problems.
#
#COPTFLAGS= -O -pipe
#
# To build the system compiler such that it forces high optimization levels to
# a lower one. GCC -O2+ is known to trigger known optimizer bugs at various
# times -- this is worse on the Alpha platform. The value assigned here will
# be the highest optimization value used.
#WANT_FORCE_OPTIMIZATION_DOWNGRADE=1
#
# Compare before install
#INSTALL=install -C
#
# Mtree will follow symlinks
#MTREE_FOLLOWS_SYMLINKS= -L
#
# To build ppp with normal permissions
#PPP_NOSUID= true
#
# To enable installing ssh(1) with the setuid bit turned on
#ENABLE_SUID_SSH= true
#
# To enable installing newgrp(1) with the setuid bit turned on.
# Without the setuid bit, newgrp cannot change users' groups.
#ENABLE_SUID_NEWGRP= true
#
# To avoid building various parts of the base system:
#NO_ACPI= true # do not build acpiconf(8) and related programs
#NO_BOOT= true # do not build boot blocks and loader
#NO_CVS= true # do not build CVS
#NO_CXX= true # do not build C++ and friends
#NO_BLUETOOTH= true # do not build Bluetooth related stuff
#NO_DYNAMICROOT=true # do not link /bin and /sbin dynamically
#NO_FORTRAN= true # do not build g77 and related libraries
#NO_GDB= true # do not build GDB
#NO_I4B= true # do not build isdn4bsd package
#NO_IPFILTER= true # do not build IP Filter package
#NO_PF= true # do not build PF firewall package
#NO_AUTHPF= true # do not build and install authpf (setuid/gid)
#NO_KERBEROS= true # do not build and install Kerberos 5 (KTH Heimdal)
#NO_LPR= true # do not build lpr and related programs
#NO_MAILWRAPPER=true # do not build the mailwrapper(8) MTA selector
#NO_MODULES= true # do not build modules with the kernel
#NO_OBJC= true # do not build Objective C support
#NO_OPENSSH= true # do not build OpenSSH
#NO_OPENSSL= true # do not build OpenSSL (implies NO_KERBEROS/NO_OPENSSH)
#NO_SENDMAIL= true # do not build sendmail and related programs
#NO_SHAREDOCS= true # do not build the 4.4BSD legacy docs
#NO_TCSH= true # do not build and install /bin/csh (which is tcsh)
#NO_TOOLCHAIN= true # do not build programs for program development
#NO_USB= true # do not build usbd(8) and related programs
#NO_VINUM= true # do not build Vinum utilities
#NOATM= true # do not build ATM related programs and libraries
#NOCRYPT= true # do not build any crypto code
#NOGAMES= true # do not build games (games/ subdir)
#NOINET6= true # do not build IPv6 related programs and libraries
#NOINFO= true # do not make or install info files
#NOLIBC_R= true # do not build libc_r (re-entrant version of libc)
#NOLIBPTHREAD= true # do not build libpthread (M:N threading library)
#NOLIBTHR= true # do not build libthr (1:1 threading library)
#NOMAN= true # do not build manual pages
#NOPROFILE= true # Avoid compiling profiled libraries
#NOSHARE= true # do not go into the share subdir
#
# Variables to control whether parts of the base BIND are built.
# Defining NO_BIND makes all of the following BIND variables obsolete.
# Please see the more detailed descriptions in make.conf(5).
#NO_BIND= true # Do not build any part of BIND
#NO_BIND_DNSSEC= true # Do not build dnssec-keygen, dnssec-signzone
#NO_BIND_ETC= true # Do not install files to /etc/namedb
#NO_BIND_LIBS_LWRES= true # Do not install the lwres library
#NO_BIND_MTREE= true # Do not run mtree to create chroot directories
#NO_BIND_NAMED= true # Do not build named, rndc, lwresd, etc.
#NO_BIND_UTILS= true # Do not build dig, host, nslookup, nsupdate
#WITH_BIND_LIBS= true # Install the BIND libs and include files
#
# To build sys/modules when building the world (our old way of doing things)
#MODULES_WITH_WORLD=true # do not build modules when building kernel
#
# The list of modules to build instead of all of them.
#MODULES_OVERRIDE= linux ipfw
#
# The following controls building optional IDEA code in libcrypto and
# certain ports. Patents are involved - you must not use this unless
# you either have a license or fall within patent 'fair use'
# provisions.
#
# *** It is YOUR RESPONSIBILITY to determine if you can use this! ***
#
# IDEA is patented in the USA and many European countries - thought to
# be OK to use for any non-commercial use. This is optional.
#MAKE_IDEA= YES # IDEA (128 bit symmetric encryption)
#
# If you do not want unformatted manual pages to be compressed
# when they are installed:
#
#NOMANCOMPRESS= true
#
#
# If you want the "compat" shared libraries installed as part of your normal
# builds, uncomment these:
#
#COMPAT1X= yes
#COMPAT20= yes
#COMPAT21= yes
#COMPAT22= yes
#COMPAT3X= yes
#COMPAT4X= yes
#
#
# Default format for system documentation, depends on your printer.
# Set this to "ascii" for simple printers or screen
#
#PRINTERDEVICE= ps
#
#
# How long to wait for a console keypress before booting the default kernel.
# This value is approximately in milliseconds. Keypresses are accepted by the
# BIOS before booting from disk, making it possible to give custom boot
# parameters even when this is set to 0.
#
#BOOTWAIT=0
#BOOTWAIT=30000
#
# By default, the system will always use the keyboard/video card as system
# console. However, the boot blocks may be dynamically configured to use a
# serial port in addition to or instead of the keyboard/video console.
#
# By default we use COM1 as our serial console port *if* we're going to use
# a serial port as our console at all. Alter as necessary.
#
# COM1: = 0x3F8, COM2: = 0x2F8, COM3: = 0x3E8, COM4: = 0x2E8
#
#BOOT_COMCONSOLE_PORT= 0x3F8
#
# The default serial console speed is 9600. Set the speed to a larger value
# for better interactive response.
#
#BOOT_COMCONSOLE_SPEED= 115200
#
# By default the 'pxeboot' loader retrieves the kernel via NFS. Defining
# this and recompiling /usr/src/sys/boot will cause it to retrieve the kernel
# via TFTP. This allows pxeboot to load a custom BOOTP diskless kernel yet
# still mount the server's '/' (i.e. rather than load the server's kernel).
#
#LOADER_TFTP_SUPPORT= YES
#
#
# Kerberos 5 su (k5su)
# If you want to use the k5su utility, define this to have it installed
# set-user-ID.
#ENABLE_SUID_K5SU= yes
#
#
# CVSup update flags. Edit SUPFILE settings to reflect whichever distribution
# file(s) you use on your site (see /usr/share/examples/cvsup/README for more
# information on CVSup and these files). To use, do "make update" in /usr/src.
#
#SUP_UPDATE= yes
#
#SUP= /usr/local/bin/cvsup
#SUPFLAGS= -g -L 2
#SUPHOST= cvsup.uk.FreeBSD.org
#SUPFILE= /usr/share/examples/cvsup/standard-supfile
#PORTSSUPFILE= /usr/share/examples/cvsup/ports-supfile
#DOCSUPFILE= /usr/share/examples/cvsup/doc-supfile
#
# top(1) uses a hash table for the user names. The size of this hash
# can be tuned to match the number of local users. The table size should
# be a prime number approximately twice as large as the number of lines in
# /etc/passwd. The default number is 20011.
#
#TOP_TABLE_SIZE= 101
#
# Documentation
#
# The list of languages and encodings to build and install
#
#DOC_LANG= en_US.ISO8859-1 ru_RU.KOI8-R
#
#
# sendmail
#
# The following sets the default m4 configuration file to use at
# install time. Use with caution as a make install will overwrite
# any existing /etc/mail/sendmail.cf. Note that SENDMAIL_CF is now
# deprecated. The value should be a fully qualified path name.
#
#SENDMAIL_MC=/etc/mail/myconfig.mc
#
# The following sets the default m4 configuration file for mail
# submission to use at install time. Use with caution as a make
# install will overwrite any existing /etc/mail/submit.cf. The
# value should be a fully qualified path name.
#
#SENDMAIL_SUBMIT_MC=/etc/mail/mysubmit.mc
#
# If you need to build additional .cf files during a make buildworld,
# include the full paths to the .mc files in SENDMAIL_ADDITIONAL_MC.
#
#SENDMAIL_ADDITIONAL_MC=/etc/mail/foo.mc /etc/mail/bar.mc
#
# The following overrides the default location for the m4 configuration
# files used to build a .cf file from a .mc file.
#
#SENDMAIL_CF_DIR=/usr/local/share/sendmail/cf
#
# Setting the following variable modifies the flags passed to m4 when
# building a .cf file from a .mc file. It can be used to enable
# features disabled by default.
#
#SENDMAIL_M4_FLAGS=
#
# Setting the following variables modifies the build environment for
# sendmail and its related utilities. For example, SASL support can be
# added with settings such as:
#
# with SASLv1:
# SENDMAIL_CFLAGS=-I/usr/local/include/sasl1 -DSASL
# SENDMAIL_LDFLAGS=-L/usr/local/lib
# SENDMAIL_LDADD=-lsasl
#
# with SASLv2:
# SENDMAIL_CFLAGS=-I/usr/local/include -DSASL=2
# SENDMAIL_LDFLAGS=-L/usr/local/lib
# SENDMAIL_LDADD=-lsasl2
#
# Note: If you are using Cyrus SASL with other applications which require
# access to the sasldb file, you should add the following to your
# sendmail.mc file:
#
# define(`confDONT_BLAME_SENDMAIL',`GroupReadableSASLDBFile')
#
#SENDMAIL_CFLAGS=
#SENDMAIL_LDFLAGS=
#SENDMAIL_LDADD=
#SENDMAIL_DPADD=
#
# Setting SENDMAIL_SET_USER_ID will install the sendmail binary as a
# set-user-ID root binary instead of a set-group-ID smmsp binary and will
# prevent the installation of /etc/mail/submit.cf.
# This is a deprecated mode of operation. See etc/mail/README for more
# information.
#
#SENDMAIL_SET_USER_ID=
#
# The permissions to use on alias and map databases generated using
# /etc/mail/Makefile. Defaults to 0640.
#
#SENDMAIL_MAP_PERMS=
#
# Specify the X11 implementation being used
X_WINDOW_SYSTEM=xorg
# added by use.perl 2005-02-04 18:36:52
PERL_VER=5.8.6
PERL_VERSION=5.8.6
and my cvsup-file is:
# $FreeBSD: src/share/examples/cvsup/ports-supfile,v 1.32 2004/05/24 06:23:15 cjc Exp $
#
# This file contains all of the "CVSup collections" that make up the
# FreeBSD-current ports collection.
#
# CVSup (CVS Update Protocol) allows you to download the latest CVS
# tree (or any branch of development therefrom) to your system easily
# and efficiently (far more so than with sup, which CVSup is aimed
# at replacing). If you're running CVSup interactively, and are
# currently using an X display server, you should run CVSup as follows
# to keep your CVS tree up-to-date:
#
# cvsup ports-supfile
#
# If not running X, or invoking cvsup from a non-interactive script, then
# run it as follows:
#
# cvsup -g -L 2 ports-supfile
#
# You may wish to change some of the settings in this file to better
# suit your system:
#
# host=CHANGE_THIS.FreeBSD.org
# This specifies the server host which will supply the
# file updates. You must change it to one of the CVSup
# mirror sites listed in the FreeBSD Handbook at
# http://www.freebsd.org/doc/handbook/mirrors.html.
# You can override this setting on the command line
# with cvsup's "-h host" option.
#
# base=/var/db
# This specifies the root where CVSup will store information
# about the collections you have transferred to your system.
# A setting of "/var/db" will generate this information in
# /var/db/sup. Even if you are CVSupping a large number of
# collections, you will be hard pressed to generate more than
# ~1MB of data in this directory. You can override the
# "base" setting on the command line with cvsup's "-b base"
# option. This directory must exist in order to run CVSup.
#
# prefix=/usr
# This specifies where to place the requested files. A
# setting of "/usr" will place all of the files requested
# in "/usr/ports" (e.g., "/usr/ports/devel", "/usr/ports/lang").
# The prefix directory must exist in order to run CVSup.
# Defaults that apply to all the collections # # IMPORTANT: Change the next line to use one of the CVSup mirror sites # listed at http://www.freebsd.org/doc/handbook/mirrors.html. *default host=cvsup.au.FreeBSD.org *default base=/var/db *default prefix=/usr *default release=cvs tag=. *default delete use-rel-suffix
# If you seem to be limited by CPU rather than network or disk bandwidth, try
# commenting out the following line. (Normally, today's CPUs are fast enough
# that you want to run compression.)
*default compress
## Ports Collection. # # The easiest way to get the ports tree is to use the "ports-all" # mega-collection. It includes all of the individual "ports-*" # collections, ports-all
# These are the individual collections that make up "ports-all". If you # use these, be sure to comment out "ports-all" above. # # Be sure to ALWAYS cvsup the ports-base collection if you use any of the # other individual collections below. ports-base is a mandatory collection # for the ports collection, and your ports may not build correctly if it # is not kept up to date. #ports-base #ports-accessibility #ports-arabic #ports-archivers #ports-astro #ports-audio #ports-benchmarks #ports-biology #ports-cad #ports-chinese #ports-comms #ports-converters #ports-databases #ports-deskutils #ports-devel #ports-dns #ports-editors #ports-emulators #ports-finance #ports-french #ports-ftp #ports-games #ports-german #ports-graphics #ports-hebrew #ports-hungarian #ports-irc #ports-japanese #ports-java #ports-korean #ports-lang #ports-mail #ports-math #ports-mbone #ports-misc #ports-multimedia #ports-net #ports-net-mgmt #ports-news #ports-palm #ports-picobsd #ports-polish #ports-portuguese #ports-print #ports-russian #ports-science #ports-security #ports-shells #ports-sysutils #ports-textproc #ports-ukrainian #ports-vietnamese #ports-www #ports-x11 #ports-x11-clocks #ports-x11-fm #ports-x11-fonts #ports-x11-servers #ports-x11-themes #ports-x11-toolkits #ports-x11-wm
so, I am really stumped with this error. I have deleted /usr/ports/mozex/Makefile.xpi and done a fresh cvsup to no avail.
This is my first message to this list so hopefully it is to the right place and that I have followed all the requirements. Thankyou in advance for your help.
thanks, Tim
_______________________________________________ [email protected] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
