Hello again! Your answers were a bit out of my league:
> > here is my rc.conf so far. i'm not sure if it's working > > i haven't had a chance to reboot yet. > > > > please let me know what you think of it? > > > > # *** IPv6 configuration > > # > > ipv6_enable="YES" > > ipv6_gateway_enable="YES" > > cloned_interfaces="gif0" > > ipv6_network_interfaces="gif0" > > ipv6_defaultrouter="fe80::" > > ifconfig_gif0="inet 213.181.153.22 213.121.24.85" > > ipv6_ifconfig_gif0_alias1="2001:618:400:33bb::1 prefixlen 64" > > ipv6_ifconfig_gif0_alias2="2001:618:400:33bb::2 prefixlen 64" > > ipv6_ifconfig_gif0_alias3="2001:618:400:33bb::3 prefixlen 64" > > ipv6_firewall_enable="YES" > > ipv6_firewall_type="open" > > rtadvd_enable="YES" > > rtadvd_interfaces="gif0" > > You have nothing to specify the ipv6 part of the gif tunnel. should > have 2 ipv6 addresses usualy on a /128. Could you please provide me with an example? > Your ipv6 default gateway is a fe80: address (link local.) Usualy > it would be your next hop out onto the ipv6 internet (in my case > the other side of the ipv6 part of the gif tunnel.) How should my gateway be? > You are advertising your machine as an ipv6 router but only on the > gif interface, thus any ipv6 hosts you have on your network wont > see the router advertisment packets and wont autoconfigure to the > range you are advertising. My network interface connecting me to the Internet is lnc0. Should rtadvd be advertising it instead? > Hope you get it working, I'm no expert but it works for me :) Now now :) You seem to know your way. All the best, -- Fafa > > ----- Original Message ----- > > From: Vince <[EMAIL PROTECTED]> > > To: "'Fafa Diliha Romanova'" <[EMAIL PROTECTED]>, [EMAIL PROTECTED] > > Subject: RE: IPv6 in rc.conf only: create gif0 / add route? > > Date: Mon, 14 Mar 2005 20:26:53 -0000 > > > >> > >> Since you are using a gif interface I assume you use a tunnel for your ipv6 > >> connection. > >> > >> Here is the relevant parts of my rc.conf which works > >> (I use a H.E. ipv6 tunnel (http://tunnelbroker.net) > >> but any gif tunnel should be similar) > >> > >> gif_interfaces="gif0" # create the gif > >> gifconfig_gif0="62.140.220.90 64.71.128.83" # setup the ipv4 endpoints of > >> the tunnel > >> ipv6_enable="YES" # Set to YES to set up for IPv6. > >> ipv6_gateway_enable="YES" > >> ipv6_network_interfaces="gif0 fxp0" # List of network interfaces (or > >> "auto"). > >> ipv6_defaultrouter="2001:470:1F01:FFFF::120" # Set to IPv6 default > >> gateway > >> ipv6_ifconfig_gif0="2001:470:1F01:FFFF::121 2001:470:1F01:FFFF::120 > >> prefixlen 128" #setup ipv6 tunnel > >> ipv6_ifconfig_fxp0="2001:470:1F01:244::1 prefixlen 64" #set fxp0 ipv6 > >> address > >> rtadvd_enable="YES" # Set to YES to enable an IPv6 router > >> rtadvd_interfaces="fxp1 fxp0 wi0" # Interfaces rtadvd sends RA > >> packets. > >> > >> > >> Some lines may wrap. > >> Vince > >> > >>> -----Original Message----- > >>> From: [EMAIL PROTECTED] > >>> [mailto:[EMAIL PROTECTED] On Behalf Of Fafa > >>> Diliha Romanova > >>> Sent: 13 March 2005 20:11 > >>> To: [EMAIL PROTECTED] > >>> Subject: IPv6 in rc.conf only: create gif0 / add route? > >>> > >>> Hey! > >>> > >>> I am trying to add my entire IPv6 setup into rc.conf. > >>> But it seems it won't automagically create gif0, nor will it add > >>> the default route. This is my rc.conf: > >>> > >>> # *** IPv6 configuration > >>> # > >>> ipv6_enable="YES" > >>> ipv6_gateway_enable="YES" > >>> ipv6_network_interfaces="gif0" > >>> ipv6_defaultrouter="fe80::%gif0" > >>> ipv6_ifconfig_gif0="inet 213.183.143.59 213.121.24.85" > >>> ipv6_ifconfig_gif0="inet6 alias 2001:618:400:4572::1 prefixlen 64" > >>> ipv6_ifconfig_gif0="inet6 alias 2001:618:400:4572::2 prefixlen 64" > >>> ipv6_ifconfig_gif0="inet6 alias 2001:618:400:4572::3 prefixlen 64" > >>> ipv6_firewall_enable="YES" > >>> ipv6_firewall_type="open" > >>> rtadvd_enable="YES" > >>> rtadvd_interfaces="gif0" > >>> > >>> Is anybody able to tell what I lack? > >>> I certainly cannot ping6 6bone.net after reboot. > >>> > >>> Thanks! > >>> > >>> All the best, > >>> -- Fafa -- ___________________________________________________________ Sign-up for Ads Free at Mail.com http://promo.mail.com/adsfreejump.htm _______________________________________________ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"