You can argue the technical theory all you want, but the measurements say otherwise.
You guys have done it once again. Baited me into firing up a test that I already know the results of:
Setup: Bridging em0 to em1 Load: 500Kpps, 60 bytes 3.4Ghz P4 1MB Cache
FreeBSD 4.9 -> Load: 38% (I put this in for fun :-)
Freebsd 5.4-Pre UP (no HT) -> Load: high 55-60% range
FreeBSD 5.4-Pre SMP/HT -> Load: 70-80% (much more jumping around)
The bottom line is that if you don't test things to get real world results, you don't know crap.
If that were true, then it would be equally true of systems with actualit's
multiple physical processors. In practice, multiple processors provide
an obvious performance gain, and hyperthreading does, too, although
much more modest than the gain obtained from physically independent processors.
this shows that you really are a bit foggy. Did you miss the part where with 2 processors you actually do have 2 processors?
I can make an argument that networking with 1 processor on 5.4 is better than with 2. For example, with a test similar to the above, with 2 phyiscal processors FreeBSD 5.4 will start dropping packets way before it hits 500Kpps unless you increase the interrrupts/second, which of course increases the system load. And even with the dropped packets (which should reduce the load because it doesnt have to receive and transmit the packet), the load is still higher than for 4.x with a single processor.
You and many others regulary say things like "SMP is obviously faster",
or "Opterons are noticably faster", but those statements are only true
for certain applications. I've tested an Opteron 2.0Ghz against a 3.4Ghz
P4, and the results are pretty interesting. For raw performance, ie
interrupts/second handling, the P4 wins easily. The P4 wins out of the
cache. But once you grow out of the cache and get more memory
intensive, the Opteron beats it handily. So which is really faster? You
could argue both depending on what benchmark you use. You
have to test it in the environment where you plan to use it. Because
the answer is almost never black and white.
-----Original Message----- From: Anthony Atkielski <[EMAIL PROTECTED]> To: freebsd-questions@freebsd.org Sent: Sat, 26 Mar 2005 23:45:21 +0100 Subject: Re: hyper threading.
[EMAIL PROTECTED] writes:
Yes, the theory is very nice; you've done a nice job reading Intel's marketing garb.
I haven't read their marketing materials. I'm simply going by the technical descriptions I've read of the architecture.
However if you don't have a specific hyperthreading-aware scheduler and particularly well-written, threaded applications, you'll lose more than you'll gain.
If that were true, then it would be equally true of systems with actual multiple physical processors. In practice, multiple processors provide an obvious performance gain, and hyperthreading does, too, although it's much more modest than the gain obtained from physically independent processors.
Since FreeBSDs network stack isn't particularly well threaded, nor is the scheduler optimized for hyperthreading, you get a big mess at the kernel level.
Nothing needs to be specially optimized for hyperthreading. All you need is at least two threads available for dispatch, with reasonably heterogenous instruction mixes that can use different parts of the processor hardware at the same time. Real-world instruction mixes are often in this category in general-purpose operating systems.
So if you have a nice application that does a lot of threaded math operations, you might think you've achieved something,
Heavily math-oriented applications (or any group of applications that contains similar instruction mixes) are among the least likely to benefit from hyperthreading, because they will tend to use the same processor logic at the same time, effectively rendering hyperthreading moot.
But what you've missed is that the overhead to manage the "better utilization" of the dual-pipelines created by HT costs more than it gains.
Unless FreeBSD is very poorly written indeed, the gain from hyperthreading should still exceed the slight increase in overhead incurred by multiprocessing logic.
Hence, the loss of performance.
Where can I see this loss of performance documented?
The poblem is not at the application level, but at the kernel level. The SMP overhead is so substantial, and the OS is working thinking it has 2 processors, that process switching and interrupt handling slow down considerably.
How much is "so substantial"? Where can I see this documented?
A machine with a 50% load UP will run 65-70% load with HT/SMP running. Like I said, its easily measurable.
Then you can show me the measurements. Where are they?
A 40% increase in system load just because of multiprocessing is enormous. Where did you get this figure?
Thats at the kernel level (say routing or bridging performance).
But the kernel is only a small fraction of overall processor utilization.
Now if the machine isn't a server, it may be just fine. Thats why I suggested testing. But for a network server HT is bad. Very Bad.
It doesn't matter whether the machine is a server or a desktop. What matters is the specific mix and nature of applications.
Not only that, but FreeBSD 5.x actually has a higher capacity network-wise with 1 processor than 2 ...
Here again, I need to see this documented.
... and I'm sure you can theorize why 2 processors should be faster than one. The theory only matters if you have well written code to handle it properly. FreeBSD is a long way off from that.
Where can I see the measurements?
-- Anthony
_______________________________________________
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to "[EMAIL PROTECTED]"
_______________________________________________ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
