I had problems with the serial console.
XP said that COM1 was busy. For the rest I followed this guideline:
http://www.freebsd.org/doc/en_US.ISO8859-1/books/handbook/serialconsole-setup.html
To give you the output, I typed it over and checked it twice!
So here is the output.
Waiting 15 seconds for SCSI devices to settle
da0 at iir0 bus 2 target 0 lun 0
da0: <Intel Host Drive #oo > Fixed Direct Access SCSI-2 device
da0: Tagged Queueing Enabled
da0: 152562MB (312448185 512 byte sectors: 255H 63S/T 19449C)
SMP: AP CPU #1 Launched!
Fatal trap 12:page fault while in kernel mode
cpuid = 1; apic id = 06
fault virtual addres = 0x0
fault code = supervisor write, page not present
instruction pointer = 0x8:0xc044b9e7
stack pointer = 0x10:0xe4d9ece0
frame pointer = 0x10:0xe4d9ecf4
code segment = base 0x0, limit 0xfffff, type 0x1b
= DPL 0, pres 1, def32 1, gran 1
processor eflags = interrupt enabled, resume, IOPL = 0
current process = 66 (swi3: cambio)
trap number = 12
panic: page fault
cpuid = 1
boot() called on cpu#o
Uptime: 16s
John Baldwin wrote:
On Monday 27 June 2005 04:36 pm, Hans van Leest wrote:
John Baldwin wrote:
On Monday 27 June 2005 03:58 pm, Hans van Leest wrote:
I can boot boot from a SMP a 5.3 stable kernel when loader.conf
contains: kern.smp.disabled=1.
Otherwise it's crashing.
But how do I continue?
I've tried CURRENT, only I've got a problem with booting in single user.
Proberbly it's the iir driver.
Thanx in advance
Can you get details of the crash? For example, can you boot over a serial
console and provide the output when it crashes? Also, can you compile the
debugger into the kernel and get a stack trace?
I've tried to use dumpdir and dumpdev to save the dump. With no succes.
I'm not that familair with kernel debugging.
I putted : dumpdev="/dev/ad0s1b" and dumpdir="YES" in my rc.conf. Only,
when I boot, I get the message: Wrong dump device or directory.
I will use the dev-handbook to try to get a dump of the crash.
Is CURRENT an option? Or can I stick with 5.3 STABLE?
Thx
5.x is fine. You don't have to get a dump. If you can setup a serial console
you can just cut and paste the panic messages.
_______________________________________________
[email protected] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-smp
To unsubscribe, send any mail to "[EMAIL PROTECTED]"
