--On December 9, 2008 12:53:05 +0100 Goran Lowkrantz
<[EMAIL PROTECTED]> wrote:
--On December 9, 2008 20:47:23 +0900 Pyun YongHyeon <[EMAIL PROTECTED]>
wrote:
On Tue, Dec 09, 2008 at 10:40:17AM +0100, Goran Lowkrantz wrote:
> Hi,
>
> in July, vr had this problem and was fixed:
> <http://www.FreeBSD.org/cgi/query-pr.cgi?pr=125010>
> <http://www.FreeBSD.org/cgi/query-pr.cgi?pr=125024>
>
> but now it's back again!
>
There was just one bug fix since then and I guess the fix is not
related with your issue.
> On a system with the following:
> 7.1-PRERELEASE FreeBSD 7.1-PRERELEASE #3: Thu Oct 16 12:31:04 UTC 2008
>
> I have to set all vr interfaces in promisc to get routing info.
>
> Using Quagga
> # pkg_info -Ix uagga
> quagga-0.99.10_3 Free RIPv1, RIPv2, OSPFv2, BGP4, IS-IS route
software >
> on an inner network using RIPv2
> # ifmcstat -i vr0
> vr0:
> inet xxx.xxx.xxx.xxx
> group 224.0.0.9
> igmpv2
> mcast-macaddr 01:00:5e:00:00:09 refcnt 1
> group 224.0.0.1
> mcast-macaddr 01:00:5e:00:00:01 refcnt 1
>
>
> On the same box, we have some em devices also and they work without
any > problems.
>
There is fundamental differences between em(4) and vr(4). The
vr(4) for VT6105M takes advantage of perfect multicast filtering
feature which is not present on all em(4) interface. Perfect
multicast filtering can reduce unwanted multicast traffics such
that it could save a lot of CPU cycles. The downside is that vr(4)
cannot accept multicast frames for a multicast group without
joining the multicast group first.
For multicast routing purpose I guess 'options MROUTING' kernel
option should be enabled to accept all multicast frames.
Does your kernel have that option?
No it has not. I will create such a beast and return with stories.
I have tried with 'options MROUTING' and it didn't work.
Did I miss something? Do I have to install and run mrouted also?
It seems like maybe the first two packages are accepted after registration
as I don't lose the routes until after about 6 min uptime. But to get
further updates, I need the interfaces in promisc.
So, next step?
/glz
_______________________________________________
freebsd-stable@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-stable
To unsubscribe, send any mail to "[EMAIL PROTECTED]"
