Mike Tancsa wrote:
At 08:19 AM 6/10/2009, Andre Oppermann wrote:
Today I upgraded an AMD64 server from FreeBSD 6.4 to 7-STABLE and got
a big
nasty surprise with the Areca RAID controller:
arcmsr0: <Areca SATA Host Adapter RAID Controller (RAID6 capable)
> mem 0xfdbff000-0xfdb400000 irq16 at device 14.0 on pci18
ARECA RAID ADAPTER0: Driver Version 1.20.00.15 2007-10-07
ARECA RAID ADAPTER0: FIRMWARE VERSION V1.46 2009-01-06
arcmsr0: [ITHREAD]
...
(probe23:arcmsr0:0:16:0): inquiry data fails comparison at DV1 step
run_interrupt_driven_hooks: still waiting after 60 seconds for xpt_config
As a further datapoint, I see no problems with amd64 RELENG_7 from May
20th, though I am running an older firmware version. I also don't appear
to receive the probe error the two of you are seeing.
arcmsr0: <Areca SATA Host Adapter RAID Controller (RAID6 capable)
> mem 0xf4500000-0xf4500fff,0xf4000000-0xf43fffff irq 18 at device 14.0
on pci7
ARECA RAID ADAPTER0: Driver Version 1.20.00.15 2007-10-07
ARECA RAID ADAPTER0: FIRMWARE VERSION V1.42 2006-10-13
arcmsr0: [ITHREAD]
da0 at arcmsr0 bus 0 target 0 lun 0
da0: <Areca BigVol01 R001> Fixed Direct Access SCSI-5 device
da0: 166.666MB/s transfers (83.333MHz DT, offset 32, 16bit)
da0: Command Queueing Enabled
da0: 1831054MB (3749999616 512 byte sectors: 255H 63S/T 233426C)
_______________________________________________
freebsd-stable@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-stable
To unsubscribe, send any mail to "freebsd-stable-unsubscr...@freebsd.org"
