On Thu, Oct 22, 2009 at 20:36, Pyun YongHyeon <pyu...@gmail.com> wrote: > On Thu, Oct 22, 2009 at 08:22:50PM +0200, Marius N?nnerich wrote: >> Hi Pyun, all, >> >> today I installed FreeBSD 8-STABLE r198366 on a new Box. It has a Atheros >> nic: >> a...@pci0:2:0:0: class=0x020000 card=0x831c1043 chip=0x10261969 >> rev=0xb0 hdr=0x00 >> vendor = 'Attansic (Now owned by Atheros)' >> device = 'PCI-E ETHERNET CONTROLLER (AR8121/AR8113 )' >> class = network >> subclass = ethernet >> >> ale0: flags=8802<BROADCAST,SIMPLEX,MULTICAST> metric 0 mtu 1500 >> >> options=319a<TXCSUM,VLAN_MTU,VLAN_HWTAGGING,VLAN_HWCSUM,TSO4,WOL_MCAST,WOL_MAGIC> >> ether 00:24:8c:a4:0a:b3 >> media: Ethernet autoselect (none) >> status: no carrier >> >> The nic gets no carrier at all. I tried against two known-working nics >> with a cross-over cable and against a dsl-modem. >> Any idea what to try? Will happily test patches. >> > > Would you show me dmesg output related with ale(4)/atphy(4)? > Also show me the output "devinfo -rv | grep phy".
Sure: % dmesg|grep ale ale0: <Atheros AR8121/AR8113/AR8114 PCIe Ethernet> port 0xdc00-0xdc7f mem 0xfbec0000-0xfbefffff irq 18 at device 0.0 on pci2 ale0: 960 Tx FIFO, 1024 Rx FIFO ale0: Using 1 MSI messages. miibus0: <MII bus> on ale0 ale0: Ethernet address: 00:24:8c:a4:0a:b3 ale0: [FILTER] ale0: link state changed to DOWN % dmesg|grep atphy atphy0: <Atheros F1 10/100/1000 PHY> PHY 0 on miibus0 atphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT-FDX, auto % devinfo -rv | grep phy atphy0 pnpinfo oui=0x1374 model=0x1 rev=0x9 at phyno=0 ip1000phy0 pnpinfo oui=0x90c3 model=0x8 rev=0x0 at phyno=24 It is a GENERIC kernel. _______________________________________________ freebsd-stable@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-stable To unsubscribe, send any mail to "freebsd-stable-unsubscr...@freebsd.org"