Hi, I have two routers (HP DL140G3):
NAS3 FreeBSD 8.1-PRERELEASE # 0: Thu Jun 3 04:13:07 MSD 2010 i386 NAS2 FreeBSD 8.1-PRERELEASE # 0: Sat Jun 12 16:42:19 UTC 2010 i386 (r208993 included) bge0 @ pci0: 19:0:0: class = 0x020000 card = 0x3260103c chip = 0x165914e4 rev = 0x11 hdr = 0x00 vendor = 'Broadcom Corporation' device = 'NetXtreme Gigabit Ethernet PCI Express (BCM5721)' class = network subclass = ethernet bge1 @ pci0: 20:0:0: class = 0x020000 card = 0x3260103c chip = 0x165914e4 rev = 0x11 hdr = 0x00 vendor = 'Broadcom Corporation' device = 'NetXtreme Gigabit Ethernet PCI Express (BCM5721)' class = network subclass = ethernet I have some problems with bge on NAS2. After some time (about 15 hours) bge1 stops flowing traffic. NAS3 NAS3 - pppoe server. Through bge1 passes only ip traffic through bge0 no ip-traffic. Problems occur only with the bge1 interface on NAS2. Traffic through bge1 not pass until I will not do "ifconfig bge1 down ifconfig bge1 up". When I do "ifconfig bge0 down" NIC does not shutdown: nas2 # ifconfig bge1 down nas2 # nas2 # ifconfig bge1 bge1: flags = 8843 <UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500 options = 8009b <RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,VLAN_HWCSUM,LINKSTATE> ether XXXXXXXXXXXXX inet YYYYYYYYYYY netmask 0xffffffc0 broadcast YYYYYYYYYYYY media: Ethernet autoselect (1000baseT <full-duplex>) status: active LED also indicates that the NIC is active. I left the NAS in a state of "frozen bge1" - and can provide additional information for diagnosis. _______________________________________________ freebsd-stable@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-stable To unsubscribe, send any mail to "freebsd-stable-unsubscr...@freebsd.org"