On 30/11/2010 00:25, Adrian Chadd wrote:
(I should get me an AR9285 to test with at some point.)
On 29 November 2010 18:52, David DEMELIER<demelier.da...@gmail.com> wrote:
ath0: bad series3 hwrate 0x1b, tries 2 ts_status 0x0
ath0: bad series3 hwrate 0x1b, tries 2 ts_status 0x0
ath0: bad series3 hwrate 0x1b, tries 2 ts_status 0x0
ath0: bad series3 hwrate 0x1b, tries 2 ts_status 0x0
That's ath_rate_sample saying "I don't know about that hardware rate",
but it transmitted successfully!
So something queued up a patcket at that hwrate. 0x1B is CCK_1MB_L -
that should be fine in 11bg?
Or is this somehow running in 11A mode? Would you please paste
'ifconfig wlan0' here?
mark...@melon ~ $ ifconfig wlan0
wlan0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
ether c4:17:fe:c4:14:b9
inet 130.79.183.186 netmask 0xfffffc00 broadcast 130.79.183.255
media: IEEE 802.11 Wireless Ethernet OFDM/36Mbps mode 11g
status: associated
ssid osiris-sec channel 11 (2462 MHz 11g) bssid 00:26:99:23:69:23
regdomain 106 indoor ecm authmode WPA2/802.11i privacy ON
deftxkey UNDEF TKIP 2:128-bit TKIP 3:128-bit txpower 20 bmiss 7
scanvalid 450 bgscan bgscanintvl 300 bgscanidle 250 roam:rssi 7
roam:rate 5 protmode CTS wme burst roaming MANUAL bintval 102
I also don't understand why the option AH_SUPPORT_AR5416 is needed in
kernel, I found this
http://lists.freebsd.org/pipermail/freebsd-current/2009-May/006417.html
and it should include it if the driver needs it, isn't it? Here my
kernel won't build if I remove it so I have :
options AH_SUPPORT_AR5416
device ath
device ath_hal
device ath_rate_sample
Would you please file a PR for that and email me the PR number?
PR as :kern/152736
Thanks,
adrian
_______________________________________________
freebsd-stable@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-stable
To unsubscribe, send any mail to "freebsd-stable-unsubscr...@freebsd.org"
