On Sun, Dec 26, 2010 at 4:43 PM, Jean-Yves Avenard <jyaven...@gmail.com> wrote: > On 27 December 2010 09:55, Jean-Yves Avenard <jyaven...@gmail.com> wrote: >> Hi there. >> >> I used stable-8-zfsv28-20101223-nopython.patch.xz from >> http://people.freebsd.org/~mm/patches/zfs/v28/ > > I did the following: > > # zpool status > pool: pool > state: ONLINE > scan: none requested > config: > > NAME STATE READ WRITE CKSUM > pool ONLINE 0 0 0 > raidz1-0 ONLINE 0 0 0 > ada2 ONLINE 0 0 0 > ada3 ONLINE 0 0 0 > ada4 ONLINE 0 0 0 > ada5 ONLINE 0 0 0 > ada6 ONLINE 0 0 0 > ada7 ONLINE 0 0 0 > cache > label/zcache ONLINE 0 0 0 > > errors: No known data errors > > so far so good > > [r...@server4 /pool/home/jeanyves_avenard]# zpool add pool log > /dev/label/zil [r...@server4 /pool/home/jeanyves_avenard]# zpool > status > pool: pool > state: ONLINE > scan: none requested > config: > > NAME STATE READ WRITE CKSUM > pool ONLINE 0 0 0 > raidz1-0 ONLINE 0 0 0 > ada2 ONLINE 0 0 0 > ada3 ONLINE 0 0 0 > ada4 ONLINE 0 0 0 > ada5 ONLINE 0 0 0 > ada6 ONLINE 0 0 0 > ada7 ONLINE 0 0 0 > logs > label/zil ONLINE 0 0 0 > cache > label/zcache ONLINE 0 0 0 > > errors: No known data errors > > so far so good: > > # zpool remove pool logs label/zil > cannot remove logs: no such device in pool
Is that a typo, or the actual command you used? You have an extra "s" in there. Should be "log" and not "logs". However, I don't think that command is correct either. I believe you want to use the "detach" command, not "remove". # zpool detach pool label/zil -- Freddie Cash fjwc...@gmail.com
_______________________________________________ freebsd-stable@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-stable To unsubscribe, send any mail to "freebsd-stable-unsubscr...@freebsd.org"