Hey All,
I'm having an odd issue, and the only thing I can imagine is that there
has been a major change between 8.1 and 8.2.
Using the 8.1 kernel everything is dandy. But when I try to use a newly
compiled kernel from 8.2(GENERIC) I have no luck. Root will not mount.
Here are relevant kernel messages under 8.1...
FreeBSD 8.1-RELEASE-p2 #2: Mon Jan 31 19:25:14 EST 2011
atapci2: <Intel ICH7 SATA300 controller> port
0x30d8-0x30df,0x30cc-0x30cf,0x30d0-0x30d7,0x30c8-0x30cb,0x3060-0x307f
mem 0xc0000400-0xc00007ff irq 19 at device 31.2 on pci0
atapci2: [ITHREAD]
atapci2: AHCI called from vendor specific driver
atapci2: AHCI v1.10 controller with 4 3Gbps ports, PM not supported
ata4: <ATA channel 0> on atapci2
ata4: [ITHREAD]
ata5: <ATA channel 2> on atapci2
ata5: [ITHREAD]
ad8: 286168MB <Seagate ST3300622AS 3.AAH> at ata4-master UDMA100 SATA 3Gb/s
ad10: 286168MB <Seagate ST3300622AS 3.AAH> at ata5-master UDMA100 SATA 3Gb/s
ar0: 286168MB <Intel MatrixRAID RAID1> status: READY
ar0: disk0 READY (master) using ad8 at ata4-master
ar0: disk1 READY (mirror) using ad10 at ata5-master
GEOM: ad8s1: geometry does not match label (255h,63s != 16h,63s).
GEOM: ad10s1: geometry does not match label (255h,63s != 16h,63s).
GEOM: ufsid/4bb50de139c19cf4: geometry does not match label (255h,63s !=
16h,63s).
Trying to mount root from ufs:/dev/ar0s1a
WARNING: ufsid/47f409368a08243c expected rawoffset 0, found 63
WARNING: ufsid/4bb50de139c19cf4 expected rawoffset 0, found 63
WARNING: ar0s1a expected rawoffset 0, found 63
WARNING: ad10s1a expected rawoffset 0, found 63
WARNING: ad8s1a expected rawoffset 0, found 63
WARNING: ar0s1 expected rawoffset 0, found 63
WARNING: ad10s1 expected rawoffset 0, found 63
WARNING: ad8s1 expected rawoffset 0, found 63
GEOM: ufsid/4bb50de139c19cf4c: geometry does not match label (255h,63s
!= 16h,63s).
GEOM: ad10s1a: geometry does not match label (255h,63s != 16h,63s).
GEOM: ad10s1c: geometry does not match label (255h,63s != 16h,63s).
GEOM: ad8s1a: geometry does not match label (255h,63s != 16h,63s).
GEOM: ad8s1c: geometry does not match label (255h,63s != 16h,63s).
Under 8.2 I don't see...
--->atapci2: AHCI called from vendor specific driver
--->atapci2: AHCI v1.10 controller with 4 3Gbps ports, PM not supported
at all, I don't see the drives, nothing It drops to the 'mountroot'
prompt and when I do ? the only drive I see is the cd drive.
If I boot back with to 'kernel.old' which is 8.1 Release I have no issues.
Any ideas?
_______________________________________________
freebsd-stable@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-stable
To unsubscribe, send any mail to "freebsd-stable-unsubscr...@freebsd.org"
