Hi,
I've installed Intel Gigabit CT Desktop Adapter in my FreeBSD 8.2 box
and I can't see any incoming traffic on this card. Even ARP resolution
doesn't work. Though I see the outgoing traffic on the other end.
Relevant info:
kadlubek# uname -a
FreeBSD kadlubek 8.2-PRERELEASE FreeBSD 8.2-PRERELEASE #20: Sat Feb 12
21:22:19 CET 2011 root@kadlubek:/usr/obj/usr/src/sys/KADLUB i386
kadlubek# dmesg | grep em0
em0: <Intel(R) PRO/1000 Network Connection 7.1.9> port 0xdc00-0xdc1f
mem 0xfe9e0000-0xfe9fffff,0xfe900000-0xfe97ffff,0xfe9dc000-0xfe9dffff
irq 24 at device 0.0 on pci2
em0: Using MSIX interrupts with 0 vectors
em0: [FILTER]
kadlubek# ping 192.168.115.1
PING 192.168.115.1 (192.168.115.1): 56 data bytes
ping: sendto: Host is down
ping: sendto: Host is down
In mean time - tcpdump shows:
kadlubek# tcpdump -i em0
22:03:55.962118 ARP, Request who-has 192.168.115.1 tell
192.168.115.220, length 28
22:03:56.967107 ARP, Request who-has 192.168.115.1 tell
192.168.115.220, length 28
22:03:57.972094 ARP, Request who-has 192.168.115.1 tell
192.168.115.220, length 28
I've checked the firewall rules, but there are none there:
kadlubek# pfctl -s rules
No ALTQ support in kernel
ALTQ related functions disabled
pciconf -lv shows the card as:
em0@pci0:2:0:0: class=0x020000 card=0xa01f8086 chip=0x10d38086 rev=0x00 hdr=0x00
vendor = 'Intel Corporation'
device = 'Intel 82574L Gigabit Ethernet Controller (82574L)'
class = network
subclass = ethernet
kadlubek# sysctl dev.em.0
dev.em.0.%desc: Intel(R) PRO/1000 Network Connection 7.1.9
dev.em.0.%driver: em
dev.em.0.%location: slot=0 function=0 handle=\_SB_.PCI0.NBPG.NPGS
dev.em.0.%pnpinfo: vendor=0x8086 device=0x10d3 subvendor=0x8086
subdevice=0xa01f class=0x020000
dev.em.0.%parent: pci2
dev.em.0.nvm: -1
dev.em.0.debug: -1
dev.em.0.rx_int_delay: 0
dev.em.0.tx_int_delay: 66
dev.em.0.rx_abs_int_delay: 66
dev.em.0.tx_abs_int_delay: 66
dev.em.0.rx_processing_limit: 100
dev.em.0.flow_control: 3
dev.em.0.link_irq: 0
dev.em.0.mbuf_alloc_fail: 0
dev.em.0.cluster_alloc_fail: 0
dev.em.0.dropped: 0
dev.em.0.tx_dma_fail: 0
dev.em.0.rx_overruns: 0
dev.em.0.watchdog_timeouts: 0
dev.em.0.device_control: 1477444168
dev.em.0.rx_control: 67141634
dev.em.0.fc_high_water: 18432
dev.em.0.fc_low_water: 16932
dev.em.0.queue0.txd_head: 35
dev.em.0.queue0.txd_tail: 35
dev.em.0.queue0.tx_irq: 0
dev.em.0.queue0.no_desc_avail: 0
dev.em.0.queue0.rxd_head: 117
dev.em.0.queue0.rxd_tail: 1023
dev.em.0.queue0.rx_irq: 0
dev.em.0.mac_stats.excess_coll: 0
dev.em.0.mac_stats.single_coll: 0
dev.em.0.mac_stats.multiple_coll: 0
dev.em.0.mac_stats.late_coll: 0
dev.em.0.mac_stats.collision_count: 0
dev.em.0.mac_stats.symbol_errors: 0
dev.em.0.mac_stats.sequence_errors: 0
dev.em.0.mac_stats.defer_count: 0
dev.em.0.mac_stats.missed_packets: 0
dev.em.0.mac_stats.recv_no_buff: 0
dev.em.0.mac_stats.recv_undersize: 0
dev.em.0.mac_stats.recv_fragmented: 0
dev.em.0.mac_stats.recv_oversize: 0
dev.em.0.mac_stats.recv_jabber: 0
dev.em.0.mac_stats.recv_errs: 0
dev.em.0.mac_stats.crc_errs: 0
dev.em.0.mac_stats.alignment_errs: 0
dev.em.0.mac_stats.coll_ext_errs: 0
dev.em.0.mac_stats.xon_recvd: 0
dev.em.0.mac_stats.xon_txd: 0
dev.em.0.mac_stats.xoff_recvd: 0
dev.em.0.mac_stats.xoff_txd: 0
dev.em.0.mac_stats.total_pkts_recvd: 117
dev.em.0.mac_stats.good_pkts_recvd: 117
dev.em.0.mac_stats.bcast_pkts_recvd: 41
dev.em.0.mac_stats.mcast_pkts_recvd: 42
dev.em.0.mac_stats.rx_frames_64: 71
dev.em.0.mac_stats.rx_frames_65_127: 0
dev.em.0.mac_stats.rx_frames_128_255: 35
dev.em.0.mac_stats.rx_frames_256_511: 11
dev.em.0.mac_stats.rx_frames_512_1023: 0
dev.em.0.mac_stats.rx_frames_1024_1522: 0
dev.em.0.mac_stats.good_octets_recvd: 15499
dev.em.0.mac_stats.good_octets_txd: 2240
dev.em.0.mac_stats.total_pkts_txd: 35
dev.em.0.mac_stats.good_pkts_txd: 35
dev.em.0.mac_stats.bcast_pkts_txd: 35
dev.em.0.mac_stats.mcast_pkts_txd: 0
dev.em.0.mac_stats.tx_frames_64: 35
dev.em.0.mac_stats.tx_frames_65_127: 0
dev.em.0.mac_stats.tx_frames_128_255: 0
dev.em.0.mac_stats.tx_frames_256_511: 0
dev.em.0.mac_stats.tx_frames_512_1023: 0
dev.em.0.mac_stats.tx_frames_1024_1522: 0
dev.em.0.mac_stats.tso_txd: 0
dev.em.0.mac_stats.tso_ctx_fail: 0
dev.em.0.interrupts.asserts: 2
dev.em.0.interrupts.rx_pkt_timer: 0
dev.em.0.interrupts.rx_abs_timer: 0
dev.em.0.interrupts.tx_pkt_timer: 0
dev.em.0.interrupts.tx_abs_timer: 0
dev.em.0.interrupts.tx_queue_empty: 0
dev.em.0.interrupts.tx_queue_min_thresh: 0
dev.em.0.interrupts.rx_desc_min_thresh: 0
dev.em.0.interrupts.rx_overrun: 0
dev.em.0.wake: 0
kadlubek# sysctl dev.em.0.debug=1
Interface is RUNNING and INACTIVE
em0: hw tdh = 35, hw tdt = 35
em0: hw rdh = 118, hw rdt = 1023
em0: Tx Queue Status = 1
em0: TX descriptors avail = 989
em0: Tx Descriptors avail failure = 0
em0: RX discarded packets = 0
em0: RX Next to Check = 0
em0: RX Next to Refresh = 0
I've tried booting linux on this box, and card is detected as follows:
[ 16.376557] e1000e: Intel(R) PRO/1000 Network Driver - 1.2.20-k2
[ 16.376650] e1000e: Copyright(c) 1999 - 2011 Intel Corporation.
[ 16.376949] e1000e 0000:02:00.0: PCI INT A -> GSI 24 (level, low) -> IRQ 24
[ 16.377034] e1000e 0000:02:00.0: PCI: Disallowing DAC for device
[ 16.377152] e1000e 0000:02:00.0: setting latency timer to 64
[ 16.377387] e1000e 0000:02:00.0: (unregistered net_device): Failed
to initialize MSI-X interrupts. Falling back to MSI interrupts.
[ 16.377511] e1000e 0000:02:00.0: (unregistered net_device): Failed
to initialize MSI interrupts. Falling back to legacy interrupts.
[ 16.377783] e1000e 0000:02:00.0: Disabling ASPM L0s
[ 16.505464] e1000e 0000:02:00.0: eth2: (PCI Express:2.5GB/s:Width
x1) 00:1b:21:9d:52:1b
[ 16.505571] e1000e 0000:02:00.0: eth2: Intel(R) PRO/1000 Network Connection
[ 16.505668] e1000e 0000:02:00.0: eth2: MAC: 3, PHY: 8, PBA No: E46981-005
[ 85.821142] e1000e: eth2 NIC Link is Up 100 Mbps Full Duplex, Flow
Control: Rx/Tx
[ 85.821162] e1000e 0000:02:00.0: eth2: 10/100 speed: disabling TSO
And works without a problem.
I see, that 8-stable has 7.1.9 version of the driver, and current has
7.2.2. Are there any patches for stable to update the driver to
version 7.2.2, so I can check, if this can help? Or maybe anyone has a
clue, how to make this card function in FreeBSD?
Cheers,
Wiktor Niesiobędzki
_______________________________________________
freebsd-stable@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-stable
To unsubscribe, send any mail to "freebsd-stable-unsubscr...@freebsd.org"
