I've plugged a USB disc to a FreeBSD System and it's dedected as da1:
da1:<Samsung G3 Station> Fixed Direct Access SCSI-2 device
But when rebooting the machine, it becomes da0 and I cannot boot the
system. What's the trick to set the USB disc to da1 permanent?
You can, to some degree, wire the device with..
hint.scbus.0.at="umass-sim0"
hint.da0.at="scbus0"
However I would recommend using GPT IDs, UFS IDs or GEOM labels in fstab so the
underlying device name is irrelevant.
Daniel,
I'm not sure with /boot/devices.hint. Could you give me a hint, how to
set
# camcontrol devlist
<AMCC 9500S-4LP DISK 2.08> at scbus0 target 0 lun 0 (da0,pass0)
<Samsung G3 Station > at scbus1 target 0 lun 0 (pass1,da1)
the Samsung G3 permanently to da1 (the AMCC must be da0).
(This is a productive system and I don't want to do tests ...)
Thank you!
Regards,
Thomas.
_______________________________________________
freebsd-stable@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-stable
To unsubscribe, send any mail to "freebsd-stable-unsubscr...@freebsd.org"
