On Wed, Feb 22, 2012 at 08:49:31AM +0100, Attila Nagy wrote: > Hi, > > I get this on a recent stable/9 system with uhci support removed from > the kernel config: > da0 at ciss0 bus 0 scbus0 target 0 lun 0 > da0: <COMPAQ RAID 0 VOLUME OK> Fixed Direct Access SCSI-5 device > da0: 135.168MB/s transfers > da0: Command Queueing enabled > da0: 286070MB (585871964 512 byte sectors: 255H 32S/T 65535C) > cd0 at ata3 bus 0 scbus3 target 0 lun 0 > cd0: <HP DV-W28S-W G.W3> Removable CD-ROM SCSI-0 device > cd0: 150.000MB/s transfers (SATA 1.x, UDMA5, ATAPI 12bytes, PIO 8192bytes) > cd0: Attempt to query device size failed: NOT READY, Medium not present > - tray closed > NMI ISA 70, EISA ff > I/O channel check, likely hardware failure. > > Fatal trap 19: non-maskable interrupt trap while in kernel mode > cpuid = 0; apic id = 00 > instruction pointer = 0x20:0xffffffff804543fb > stack pointer = 0x28:0xffffffff81251e40 > frame pointer = 0x28:0xffffffff814cf660 > code segment = base 0x0, limit 0xfffff, type 0x1b > = DPL 0, pres 1, long 1, def32 0, gran 1 > processor eflags = interrupt enabled, IOPL = 0 > current process = 0 (swapper) > [ thread pid 0 tid 100000 ] > Stopped at bge_init_locked+0x233b: movl 0x81c(%rsi),%eax > db> > > and this with a plain GENERIC kernel: > da0 at ciss0 bus 0 scbus0 target 0 lun 0 > da0: <COMPAQ RAID 0 VOLUME OK> Fixed Direct Access SCSI-5 device > da0: 135.168MB/s transfers > da0: Command Queueing enabled > da0: 286070MB (585871964 512 byte sectors: 255H 32S/T 65535C) > cd0 at ata3 bus 0 scbus3 target 0 lun 0 > cd0: <HP DV-W28S-W G.W3> Removable CD-ROM SCSI-0 device > cd0: 150.000MB/s transfers (SATA 1.x, UDMA5, ATAPI 12bytes, PIO 8192bytes) > cd0: Attempt to query device size failed: NOT READY, Medium not present > - tray closed > NMI ISA 70, EISA ff > I/O channel check, likely hardware failure. > > Fatal trap 19: non-maskable interrupt trap while in kernel mode > cpuid = 0; apic id = 00 > instruction pointer = 0x20:0xffffffff80711dc5 > stack pointer = 0x28:0xffffffff81272040 > frame pointer = 0x28:0xffffff907cf44b40 > code segment = base 0x0, limit 0xfffff, type 0x1b > = DPL 0, pres 1, long 1, def32 0, gran 1 > processor eflags = interrupt enabled, IOPL = 0 > current process = 12 (irq16: uhci0) > [ thread pid 12 tid 100098 ] > Stopped at uhci_interrupt+0x65: movzwl %ax,%eax > db> KDB: stack backtrace: > KDB: stack backtrace: > db_trace_self_wrapper() at db_trace_self_wrapper+0x2a > kdb_backtrace() at kdb_backtrace+0x37 > mi_switch() at mi_switch+0x27a > turnstile_wait() at turnstile_wait+0x1cb > _mtx_lock_sleep() at _mtx_lock_sleep+0xb0 > ukbd_poll() at ukbd_poll+0xbe > kbdmux_poll() at kbdmux_poll+0x3f > sc_cngetc() at sc_cngetc+0xec > cncheckc() at cncheckc+0x4a > cngetc() at cngetc+0x1c > db_readline() at db_readline+0x77 > db_read_line() at db_read_line+0x15 > db_command_loop() at db_command_loop+0x38 > db_trap() at db_trap+0x89 > kdb_trap() at kdb_trap+0x101 > trap_fatal() at trap_fatal+0x29d > trap() at trap+0x10a > nmi_calltrap() at nmi_calltrap+0x8 > --- trap 0x13, rip = 0xffffffff80711dc5, rsp = 0xffffffff81272040, rbp = > 0xffffff907cf44b40 --- > uhci_interrupt() at uhci_interrupt+0x65 > intr_event_execute_handlers() at intr_event_execute_handlers+0x104 > ithread_loop() at ithread_loop+0xa4 > fork_exit() at fork_exit+0x11f > fork_trampoline() at fork_trampoline+0xe > --- trap 0, rip = 0, rsp = 0xffffff907cf44d00, rbp = 0 --- > db> > > After disabling stopping on NMI (kdb_on_nmi), I still can't boot from > bge (this is a PXE booted machine), I get this in an infinite loop: > bge1: link state changed to DOWN > DHCP/BOOTP timeout for server 255.255.255.255 > bge1: 3 link states coalesced > bge1: link state changed to UP > bge0: 2 link states coalesced > bge0: link state changed to DOWN > bge0: link state changed to UP > bge1: link state changed to DOWN > bge0: link state changed to DOWN > bge0: link state changed to UP > bge0: link state changed to DOWN > bge1: 2 link states coalesced > bge1: link state changed to DOWN > bge0: link state changed to UP > bge0: link state changed to DOWN > bge0: 2 link states coalesced > bge0: link state changed to DOWN > bge1: 2 link states coalesced > bge1: link state changed to DOWN > bge0: link state changed to UP > bge0: link state changed to DOWN > bge0: link state changed to UP > bge0: link state changed to DOWN > > Linux and Windows boot fine on the machine. > > dmesg up to the point where it crashes: > Copyright (c) 1992-2012 The FreeBSD Project. > Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 > The Regents of the University of California. All rights reserved. > FreeBSD is a registered trademark of The FreeBSD Foundation. > FreeBSD 9.0-STABLE #3: Tue Feb 21 11:57:33 CET 2012 > r...@boot.lab:/usr/obj/usr/src/sys/BOOTCLNT amd64 > CPU: Intel(R) Xeon(R) CPU E5-2680 0 @ 2.70GHz (2693.57-MHz K8-class CPU) > Origin = "GenuineIntel" Id = 0x206d6 Family = 6 Model = 2d > Stepping = 6 > > Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> > > Features2=0x15bee3ff<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,DCA,SSE4.1,SSE4.2,x2APIC,POPCNT,TSCDLT,XSAVE,AVX> > AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM> > AMD Features2=0x1<LAHF> > TSC: P-state invariant, performance statistics > real memory = 34359738368 (32768 MB) > avail memory = 32991268864 (31462 MB) > Event timer "LAPIC" quality 600 > ACPI APIC Table: <HP ProLiant> > FreeBSD/SMP: Multiprocessor System Detected: 32 CPUs > FreeBSD/SMP: 2 package(s) x 8 core(s) x 2 SMT threads > cpu0 (BSP): APIC ID: 0 > cpu1 (AP): APIC ID: 1 > cpu2 (AP): APIC ID: 2 > cpu3 (AP): APIC ID: 3 > cpu4 (AP): APIC ID: 4 > cpu5 (AP): APIC ID: 5 > cpu6 (AP): APIC ID: 6 > cpu7 (AP): APIC ID: 7 > cpu8 (AP): APIC ID: 8 > cpu9 (AP): APIC ID: 9 > cpu10 (AP): APIC ID: 10 > cpu11 (AP): APIC ID: 11 > cpu12 (AP): APIC ID: 12 > cpu13 (AP): APIC ID: 13 > cpu14 (AP): APIC ID: 14 > cpu15 (AP): APIC ID: 15 > cpu16 (AP): APIC ID: 32 > cpu17 (AP): APIC ID: 33 > cpu18 (AP): APIC ID: 34 > cpu19 (AP): APIC ID: 35 > cpu20 (AP): APIC ID: 36 > cpu21 (AP): APIC ID: 37 > cpu22 (AP): APIC ID: 38 > cpu23 (AP): APIC ID: 39 > cpu24 (AP): APIC ID: 40 > cpu25 (AP): APIC ID: 41 > cpu26 (AP): APIC ID: 42 > cpu27 (AP): APIC ID: 43 > cpu28 (AP): APIC ID: 44 > cpu29 (AP): APIC ID: 45 > cpu30 (AP): APIC ID: 46 > cpu31 (AP): APIC ID: 47 > ACPI Warning: Invalid length for Pm1aControlBlock: 32, using default 16 > (20110527/tbfadt-638) > ACPI Warning: Invalid length for Pm2ControlBlock: 32, using default 8 > (20110527/tbfadt-638) > ioapic1 <Version 2.0> irqs 24-47 on motherboard > ioapic0 <Version 2.0> irqs 0-23 on motherboard > ioapic2 <Version 2.0> irqs 48-71 on motherboard > kbd1 at kbdmux0 > ctl: CAM Target Layer loaded > cryptosoft0: <software crypto> on motherboard > acpi0: <HP ProLiant> on motherboard > acpi0: Power Button (fixed) > Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 > acpi_timer0: <24-bit timer at 3.579545MHz> port 0x908-0x90b on acpi0 > cpu0: <ACPI CPU> on acpi0 > cpu1: <ACPI CPU> on acpi0 > cpu2: <ACPI CPU> on acpi0 > cpu3: <ACPI CPU> on acpi0 > cpu4: <ACPI CPU> on acpi0 > cpu5: <ACPI CPU> on acpi0 > cpu6: <ACPI CPU> on acpi0 > cpu7: <ACPI CPU> on acpi0 > cpu8: <ACPI CPU> on acpi0 > cpu9: <ACPI CPU> on acpi0 > cpu10: <ACPI CPU> on acpi0 > cpu11: <ACPI CPU> on acpi0 > cpu12: <ACPI CPU> on acpi0 > cpu13: <ACPI CPU> on acpi0 > cpu14: <ACPI CPU> on acpi0 > cpu15: <ACPI CPU> on acpi0 > cpu16: <ACPI CPU> on acpi0 > cpu17: <ACPI CPU> on acpi0 > cpu18: <ACPI CPU> on acpi0 > cpu19: <ACPI CPU> on acpi0 > cpu20: <ACPI CPU> on acpi0 > cpu21: <ACPI CPU> on acpi0 > cpu22: <ACPI CPU> on acpi0 > cpu23: <ACPI CPU> on acpi0 > cpu24: <ACPI CPU> on acpi0 > cpu25: <ACPI CPU> on acpi0 > cpu26: <ACPI CPU> on acpi0 > cpu27: <ACPI CPU> on acpi0 > cpu28: <ACPI CPU> on acpi0 > cpu29: <ACPI CPU> on acpi0 > cpu30: <ACPI CPU> on acpi0 > cpu31: <ACPI CPU> on acpi0 > pcib0: <ACPI Host-PCI bridge> on acpi0 > pci0: <ACPI PCI bus> on pcib0 > pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0 > pci7: <ACPI PCI bus> on pcib1 > pcib2: <ACPI PCI-PCI bridge> at device 1.1 on pci0 > pci19: <ACPI PCI bus> on pcib2 > pcib3: <ACPI PCI-PCI bridge> at device 2.0 on pci0 > pci3: <ACPI PCI bus> on pcib3 > pci0:3:0:0: failed to read VPD data. > bge0: <Broadcom unknown BCM5719, ASIC rev. 0x5719001> mem > 0xf6bf0000-0xf6bfffff,0xf6be0000-0xf6beffff,0xf6bd0000-0xf6bdffff irq 32 > at device 0.0 on pci3 > bge0: CHIP ID 0x05719001; ASIC REV 0x5719; CHIP REV 0x57190; PCI-E ^^^^^^^^^^
This controller is new one. Probably BCM5719 A1 but not sure. > bge0: Try again This message indicates your controller has ASF/IPMI firmware. Try disabling ASF and see whether it makes any difference. (Change hw.bge.allow_asf tunable to 0). > miibus0: <MII bus> on bge0 > ukphy0: <Generic IEEE 802.3u media interface> PHY 1 on miibus0 > ukphy0: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, > 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, > auto-flow I think the use of ukphy(4) here is the side effect of ASF. BCM5719 should use brgphy(4). > bge0: Ethernet address: 3c:4a:92:b2:3c:08 > pci0:3:0:1: failed to read VPD data. > bge1: <Broadcom unknown BCM5719, ASIC rev. 0x5719001> mem > 0xf6bc0000-0xf6bcffff,0xf6bb0000-0xf6bbffff,0xf6ba0000-0xf6baffff irq 36 > at device 0.1 on pci3 > bge1: CHIP ID 0x05719001; ASIC REV 0x5719; CHIP REV 0x57190; PCI-E > miibus1: <MII bus> on bge1 > brgphy0: <BCM5719C 1000BASE-T media interface> PHY 2 on miibus1 > brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, > 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow > bge1: Ethernet address: 3c:4a:92:b2:3c:09 > pci0:3:0:2: failed to read VPD data. > bge2: <Broadcom unknown BCM5719, ASIC rev. 0x5719001> mem > 0xf6b90000-0xf6b9ffff,0xf6b80000-0xf6b8ffff,0xf6b70000-0xf6b7ffff irq 32 > at device 0.2 on pci3 > bge2: CHIP ID 0x05719001; ASIC REV 0x5719; CHIP REV 0x57190; PCI-E > miibus2: <MII bus> on bge2 > brgphy1: <BCM5719C 1000BASE-T media interface> PHY 3 on miibus2 > brgphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, > 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow > bge2: Ethernet address: 3c:4a:92:b2:3c:0a > pci0:3:0:3: failed to read VPD data. > bge3: <Broadcom unknown BCM5719, ASIC rev. 0x5719001> mem > 0xf6b60000-0xf6b6ffff,0xf6b50000-0xf6b5ffff,0xf6b40000-0xf6b4ffff irq 36 > at device 0.3 on pci3 > bge3: CHIP ID 0x05719001; ASIC REV 0x5719; CHIP REV 0x57190; PCI-E > miibus3: <MII bus> on bge3 > brgphy2: <BCM5719C 1000BASE-T media interface> PHY 4 on miibus3 > brgphy2: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, > 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow > bge3: Ethernet address: 3c:4a:92:b2:3c:0b > pcib4: <ACPI PCI-PCI bridge> at device 2.1 on pci0 > pci20: <ACPI PCI bus> on pcib4 > pcib5: <ACPI PCI-PCI bridge> at device 2.2 on pci0 > pci2: <ACPI PCI bus> on pcib5 > ciss0: <HP Smart Array P420i> port 0x5000-0x50ff mem > 0xf7f00000-0xf7ffffff,0xf7ef0000-0xf7ef03ff irq 34 at device 0.0 on pci2 > ciss0: PERFORMANT Transport > pcib6: <ACPI PCI-PCI bridge> at device 2.3 on pci0 > pci21: <ACPI PCI bus> on pcib6 > pcib7: <ACPI PCI-PCI bridge> at device 3.0 on pci0 > pci4: <ACPI PCI bus> on pcib7 > pcib8: <ACPI PCI-PCI bridge> at device 3.1 on pci0 > pci22: <ACPI PCI bus> on pcib8 > pcib9: <ACPI PCI-PCI bridge> at device 3.2 on pci0 > pci23: <ACPI PCI bus> on pcib9 > pcib10: <ACPI PCI-PCI bridge> at device 3.3 on pci0 > pci24: <ACPI PCI bus> on pcib10 > pci0: <base peripheral> at device 4.0 (no driver attached) > pci0: <base peripheral> at device 4.1 (no driver attached) > pci0: <base peripheral> at device 4.2 (no driver attached) > pci0: <base peripheral> at device 4.3 (no driver attached) > pci0: <base peripheral> at device 4.4 (no driver attached) > pci0: <base peripheral> at device 4.5 (no driver attached) > pci0: <base peripheral> at device 4.6 (no driver attached) > pci0: <base peripheral> at device 4.7 (no driver attached) > pci0: <base peripheral> at device 5.0 (no driver attached) > pci0: <base peripheral> at device 5.2 (no driver attached) > pcib11: <ACPI PCI-PCI bridge> at device 17.0 on pci0 > pci26: <ACPI PCI bus> on pcib11 > ehci0: <EHCI (generic) USB 2.0 controller> mem 0xf6c60000-0xf6c603ff irq > 21 at device 26.0 on pci0 > usbus0: EHCI version 1.0 > usbus0: <EHCI (generic) USB 2.0 controller> on ehci0 > pcib12: <ACPI PCI-PCI bridge> at device 28.0 on pci0 > pci10: <ACPI PCI bus> on pcib12 > pcib13: <ACPI PCI-PCI bridge> at device 28.7 on pci0 > pci1: <ACPI PCI bus> on pcib13 > pci1: <base peripheral> at device 0.0 (no driver attached) > vgapci0: <VGA-compatible display> mem > 0xf5000000-0xf5ffffff,0xf7de0000-0xf7de3fff,0xf7000000-0xf77fffff irq 16 > at device 0.1 on pci1 > pci1: <base peripheral> at device 0.2 (no driver attached) > uhci0: <UHCI (generic) USB controller> port 0x3c00-0x3c1f irq 16 at > device 0.4 on pci1 > usbus1: <UHCI (generic) USB controller> on uhci0 > ehci1: <EHCI (generic) USB 2.0 controller> mem 0xf6c50000-0xf6c503ff irq > 20 at device 29.0 on pci0 > usbus2: EHCI version 1.0 > usbus2: <EHCI (generic) USB 2.0 controller> on ehci1 > pcib14: <PCI-PCI bridge> at device 30.0 on pci0 > pci25: <PCI bus> on pcib14 > isab0: <PCI-ISA bridge> at device 31.0 on pci0 > isa0: <ISA bus> on isab0 > atapci0: <Intel Patsburg SATA300 controller> port > 0x4000-0x4007,0x4008-0x400b,0x4010-0x4017,0x4018-0x401b,0x4020-0x402f,0x4030-0x403f > > irq 17 at device 31.2 on pci0 > ata2: <ATA channel> at channel 0 on atapci0 > ata3: <ATA channel> at channel 1 on atapci0 > pcib15: <ACPI Host-PCI bridge> on acpi0 > pci32: <ACPI PCI bus> on pcib15 > pcib16: <PCI-PCI bridge> at device 0.0 on pci32 > pci43: <PCI bus> on pcib16 > pcib17: <ACPI PCI-PCI bridge> at device 1.0 on pci32 > pci36: <ACPI PCI bus> on pcib17 > pcib18: <ACPI PCI-PCI bridge> at device 1.1 on pci32 > pci37: <ACPI PCI bus> on pcib18 > pcib19: <ACPI PCI-PCI bridge> at device 2.0 on pci32 > pci35: <ACPI PCI bus> on pcib19 > pcib20: <ACPI PCI-PCI bridge> at device 2.1 on pci32 > pci38: <ACPI PCI bus> on pcib20 > pcib21: <ACPI PCI-PCI bridge> at device 2.2 on pci32 > pci34: <ACPI PCI bus> on pcib21 > pcib22: <ACPI PCI-PCI bridge> at device 2.3 on pci32 > pci39: <ACPI PCI bus> on pcib22 > pcib23: <ACPI PCI-PCI bridge> at device 3.0 on pci32 > pci33: <ACPI PCI bus> on pcib23 > pcib24: <ACPI PCI-PCI bridge> at device 3.1 on pci32 > pci40: <ACPI PCI bus> on pcib24 > pcib25: <ACPI PCI-PCI bridge> at device 3.2 on pci32 > pci41: <ACPI PCI bus> on pcib25 > pcib26: <ACPI PCI-PCI bridge> at device 3.3 on pci32 > pci42: <ACPI PCI bus> on pcib26 > pci32: <base peripheral> at device 4.0 (no driver attached) > pci32: <base peripheral> at device 4.1 (no driver attached) > pci32: <base peripheral> at device 4.2 (no driver attached) > pci32: <base peripheral> at device 4.3 (no driver attached) > pci32: <base peripheral> at device 4.4 (no driver attached) > pci32: <base peripheral> at device 4.5 (no driver attached) > pci32: <base peripheral> at device 4.6 (no driver attached) > pci32: <base peripheral> at device 4.7 (no driver attached) > pci32: <base peripheral> at device 5.0 (no driver attached) > pci32: <base peripheral> at device 5.2 (no driver attached) > acpi_tz0: <Thermal Zone> on acpi0 > attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0 > Timecounter "i8254" frequency 1193182 Hz quality 0 > Event timer "i8254" frequency 1193182 Hz quality 100 > hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 > Timecounter "HPET" frequency 14318180 Hz quality 950 > Event timer "HPET" frequency 14318180 Hz quality 450 > Event timer "HPET1" frequency 14318180 Hz quality 440 > Event timer "HPET2" frequency 14318180 Hz quality 440 > Event timer "HPET3" frequency 14318180 Hz quality 440 > Event timer "HPET4" frequency 14318180 Hz quality 440 > Event timer "HPET5" frequency 14318180 Hz quality 440 > Event timer "HPET6" frequency 14318180 Hz quality 440 > Event timer "HPET7" frequency 14318180 Hz quality 440 > atrtc0: <AT realtime clock> port 0x70-0x71 on acpi0 > Event timer "RTC" frequency 32768 Hz quality 0 > atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 > atkbd0: <AT Keyboard> irq 1 on atkbdc0 > kbd0 at atkbd0 > atkbd0: [GIANT-LOCKED] > uart1: <Non-standard ns8250 class UART with FIFOs> port 0x2f8-0x2ff irq > 3 on acpi0 > orm0: <ISA Option ROM> at iomem 0xc0000-0xc7fff on isa0 > sc0: <System console> at flags 0x100 on isa0 > sc0: VGA <16 virtual consoles, flags=0x300> > vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 > ppc0: cannot reserve I/O port range > uart0: <Non-standard ns8250 class UART with FIFOs> at port 0x3f8-0x3ff > irq 4 flags 0x10 on isa0 > uart0: console (9600,n,8,1) > est0: <Enhanced SpeedStep Frequency Control> on cpu0 > est: CPU supports Enhanced Speedstep, but is not recognized. > est: cpu_vendor GenuineIntel, msr 24d400001f00 > device_attach: est0 attach returned 6 > p4tcc0: <CPU Frequency Thermal Control> on cpu0 > est1: <Enhanced SpeedStep Frequency Control> on cpu1 > est: CPU supports Enhanced Speedstep, but is not recognized. > est: cpu_vendor GenuineIntel, msr 24d400001f00 > device_attach: est1 attach returned 6 > p4tcc1: <CPU Frequency Thermal Control> on cpu1 > est2: <Enhanced SpeedStep Frequency Control> on cpu2 > est: CPU supports Enhanced Speedstep, but is not recognized. > est: cpu_vendor GenuineIntel, msr 24d400001f00 > device_attach: est2 attach returned 6 > p4tcc2: <CPU Frequency Thermal Control> on cpu2 > est3: <Enhanced SpeedStep Frequency Control> on cpu3 > est: CPU supports Enhanced Speedstep, but is not recognized. > est: cpu_vendor GenuineIntel, msr 24d400001f00 > device_attach: est3 attach returned 6 > p4tcc3: <CPU Frequency Thermal Control> on cpu3 > est4: <Enhanced SpeedStep Frequency Control> on cpu4 > est: CPU supports Enhanced Speedstep, but is not recognized. > est: cpu_vendor GenuineIntel, msr 24d400001f00 > device_attach: est4 attach returned 6 > p4tcc4: <CPU Frequency Thermal Control> on cpu4 > est5: <Enhanced SpeedStep Frequency Control> on cpu5 > est: CPU supports Enhanced Speedstep, but is not recognized. > est: cpu_vendor GenuineIntel, msr 24d400001f00 > device_attach: est5 attach returned 6 > p4tcc5: <CPU Frequency Thermal Control> on cpu5 > est6: <Enhanced SpeedStep Frequency Control> on cpu6 > est: CPU supports Enhanced Speedstep, but is not recognized. > est: cpu_vendor GenuineIntel, msr 24d400001f00 > device_attach: est6 attach returned 6 > p4tcc6: <CPU Frequency Thermal Control> on cpu6 > est7: <Enhanced SpeedStep Frequency Control> on cpu7 > est: CPU supports Enhanced Speedstep, but is not recognized. > est: cpu_vendor GenuineIntel, msr 24d400001f00 > device_attach: est7 attach returned 6 > p4tcc7: <CPU Frequency Thermal Control> on cpu7 > est8: <Enhanced SpeedStep Frequency Control> on cpu8 > est: CPU supports Enhanced Speedstep, but is not recognized. > est: cpu_vendor GenuineIntel, msr 24d400001f00 > device_attach: est8 attach returned 6 > p4tcc8: <CPU Frequency Thermal Control> on cpu8 > est9: <Enhanced SpeedStep Frequency Control> on cpu9 > est: CPU supports Enhanced Speedstep, but is not recognized. > est: cpu_vendor GenuineIntel, msr 24d400001f00 > device_attach: est9 attach returned 6 > p4tcc9: <CPU Frequency Thermal Control> on cpu9 > est10: <Enhanced SpeedStep Frequency Control> on cpu10 > est: CPU supports Enhanced Speedstep, but is not recognized. > est: cpu_vendor GenuineIntel, msr 24d400001f00 > device_attach: est10 attach returned 6 > p4tcc10: <CPU Frequency Thermal Control> on cpu10 > est11: <Enhanced SpeedStep Frequency Control> on cpu11 > est: CPU supports Enhanced Speedstep, but is not recognized. > est: cpu_vendor GenuineIntel, msr 24d400001f00 > device_attach: est11 attach returned 6 > p4tcc11: <CPU Frequency Thermal Control> on cpu11 > est12: <Enhanced SpeedStep Frequency Control> on cpu12 > est: CPU supports Enhanced Speedstep, but is not recognized. > est: cpu_vendor GenuineIntel, msr 24d400001f00 > device_attach: est12 attach returned 6 > p4tcc12: <CPU Frequency Thermal Control> on cpu12 > est13: <Enhanced SpeedStep Frequency Control> on cpu13 > est: CPU supports Enhanced Speedstep, but is not recognized. > est: cpu_vendor GenuineIntel, msr 24d400001f00 > device_attach: est13 attach returned 6 > p4tcc13: <CPU Frequency Thermal Control> on cpu13 > est14: <Enhanced SpeedStep Frequency Control> on cpu14 > est: CPU supports Enhanced Speedstep, but is not recognized. > est: cpu_vendor GenuineIntel, msr 24d400001f00 > device_attach: est14 attach returned 6 > p4tcc14: <CPU Frequency Thermal Control> on cpu14 > est15: <Enhanced SpeedStep Frequency Control> on cpu15 > est: CPU supports Enhanced Speedstep, but is not recognized. > est: cpu_vendor GenuineIntel, msr 24d400001f00 > device_attach: est15 attach returned 6 > p4tcc15: <CPU Frequency Thermal Control> on cpu15 > est16: <Enhanced SpeedStep Frequency Control> on cpu16 > est: CPU supports Enhanced Speedstep, but is not recognized. > est: cpu_vendor GenuineIntel, msr 24d400001f00 > device_attach: est16 attach returned 6 > p4tcc16: <CPU Frequency Thermal Control> on cpu16 > est17: <Enhanced SpeedStep Frequency Control> on cpu17 > est: CPU supports Enhanced Speedstep, but is not recognized. > est: cpu_vendor GenuineIntel, msr 24d400001f00 > device_attach: est17 attach returned 6 > p4tcc17: <CPU Frequency Thermal Control> on cpu17 > est18: <Enhanced SpeedStep Frequency Control> on cpu18 > est: CPU supports Enhanced Speedstep, but is not recognized. > est: cpu_vendor GenuineIntel, msr 24d400001f00 > device_attach: est18 attach returned 6 > p4tcc18: <CPU Frequency Thermal Control> on cpu18 > est19: <Enhanced SpeedStep Frequency Control> on cpu19 > est: CPU supports Enhanced Speedstep, but is not recognized. > est: cpu_vendor GenuineIntel, msr 24d400001f00 > device_attach: est19 attach returned 6 > p4tcc19: <CPU Frequency Thermal Control> on cpu19 > est20: <Enhanced SpeedStep Frequency Control> on cpu20 > est: CPU supports Enhanced Speedstep, but is not recognized. > est: cpu_vendor GenuineIntel, msr 24d400001f00 > device_attach: est20 attach returned 6 > p4tcc20: <CPU Frequency Thermal Control> on cpu20 > est21: <Enhanced SpeedStep Frequency Control> on cpu21 > est: CPU supports Enhanced Speedstep, but is not recognized. > est: cpu_vendor GenuineIntel, msr 24d400001f00 > device_attach: est21 attach returned 6 > p4tcc21: <CPU Frequency Thermal Control> on cpu21 > est22: <Enhanced SpeedStep Frequency Control> on cpu22 > est: CPU supports Enhanced Speedstep, but is not recognized. > est: cpu_vendor GenuineIntel, msr 24d400001f00 > device_attach: est22 attach returned 6 > p4tcc22: <CPU Frequency Thermal Control> on cpu22 > est23: <Enhanced SpeedStep Frequency Control> on cpu23 > est: CPU supports Enhanced Speedstep, but is not recognized. > est: cpu_vendor GenuineIntel, msr 24d400001f00 > device_attach: est23 attach returned 6 > p4tcc23: <CPU Frequency Thermal Control> on cpu23 > est24: <Enhanced SpeedStep Frequency Control> on cpu24 > est: CPU supports Enhanced Speedstep, but is not recognized. > est: cpu_vendor GenuineIntel, msr 24d400001f00 > device_attach: est24 attach returned 6 > p4tcc24: <CPU Frequency Thermal Control> on cpu24 > est25: <Enhanced SpeedStep Frequency Control> on cpu25 > est: CPU supports Enhanced Speedstep, but is not recognized. > est: cpu_vendor GenuineIntel, msr 24d400001f00 > device_attach: est25 attach returned 6 > p4tcc25: <CPU Frequency Thermal Control> on cpu25 > est26: <Enhanced SpeedStep Frequency Control> on cpu26 > est: CPU supports Enhanced Speedstep, but is not recognized. > est: cpu_vendor GenuineIntel, msr 24d400001f00 > device_attach: est26 attach returned 6 > p4tcc26: <CPU Frequency Thermal Control> on cpu26 > est27: <Enhanced SpeedStep Frequency Control> on cpu27 > est: CPU supports Enhanced Speedstep, but is not recognized. > est: cpu_vendor GenuineIntel, msr 24d400001f00 > device_attach: est27 attach returned 6 > p4tcc27: <CPU Frequency Thermal Control> on cpu27 > est28: <Enhanced SpeedStep Frequency Control> on cpu28 > est: CPU supports Enhanced Speedstep, but is not recognized. > est: cpu_vendor GenuineIntel, msr 24d400001f00 > device_attach: est28 attach returned 6 > p4tcc28: <CPU Frequency Thermal Control> on cpu28 > est29: <Enhanced SpeedStep Frequency Control> on cpu29 > est: CPU supports Enhanced Speedstep, but is not recognized. > est: cpu_vendor GenuineIntel, msr 24d400001f00 > device_attach: est29 attach returned 6 > p4tcc29: <CPU Frequency Thermal Control> on cpu29 > est30: <Enhanced SpeedStep Frequency Control> on cpu30 > est: CPU supports Enhanced Speedstep, but is not recognized. > est: cpu_vendor GenuineIntel, msr 24d400001f00 > device_attach: est30 attach returned 6 > p4tcc30: <CPU Frequency Thermal Control> on cpu30 > est31: <Enhanced SpeedStep Frequency Control> on cpu31 > est: CPU supports Enhanced Speedstep, but is not recognized. > est: cpu_vendor GenuineIntel, msr 24d400001f00 > device_attach: est31 attach returned 6 > p4tcc31: <CPU Frequency Thermal Control> on cpu31 > Timecounters tick every 1.000 msec > usbus0: 480Mbps High Speed USB v2.0 > usbus1: 12Mbps Full Speed USB v1.0 > ugen0.1: <Intel> at usbus0 > uhub0: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus0 > ugen1.1: <0x103c> at usbus1 > uhub1: <0x103c UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1 > usbus2: 480Mbps High Speed USB v2.0 > ugen2.1: <Intel> at usbus2 > uhub2: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus2 > uhub1: 2 ports with 2 removable, self powered > uhub0: 2 ports with 2 removable, self powered > uhub2: 2 ports with 2 removable, self powered > ugen1.2: <HP> at usbus1 > ukbd0: <Virtual Keyboard > on usbus1 > (probe0:ciss0:0:0:0): REPORT LUNS. CDB: a0 0 0 0 0 0 0 0 0 10 0 0 > (probe0:ciss0:0:0:0): CAM status: SCSI Status Error > (probe0:ciss0:0:0:0): SCSI status: Check Condition > (probe0:ciss0:0:0:0): SCSI sense: ILLEGAL REQUEST asc:20,0 (Invalid > command operation code) > kbd2 at ukbd0 > ums0: <Virtual Mouse> on usbus1 > da0 at ciss0 bus 0 scbus0 target 0 lun 0 > da0: <COMPAQ RAID 0 VOLUME OK> Fixed Direct Access SCSI-5 device > da0: 135.168MB/s transfers > da0: Command Queueing enabled > da0: 286070MB (585871964 512 byte sectors: 255H 32S/T 65535C) > cd0 at ata3 bus 0 scbus3 target 0 lun 0 > cd0: <HP DV-W28S-W G.W3> Removable CD-ROM SCSI-0 device > cd0: 150.000MB/s transfers (SATA 1.x, UDMA5, ATAPI 12bytes, PIO 8192bytes) > cd0: Attempt to query device size failed: NOT READY, Medium not present > - tray closed _______________________________________________ freebsd-stable@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-stable To unsubscribe, send any mail to "freebsd-stable-unsubscr...@freebsd.org"