On Fri, 2012-03-02 Sean Bruno wrote: > You may want to try playing around with BIOS settings regarding USB.
I'd happily do so, but unfortunately this BIOS.. PhoenixBIOS 4.0 Release 6.1 HP System BIOS - O09 (07/19/2007) HP FEATURES VERSION : 1.08.00 has no USB knobs to turn. Kai. > On Fri, 2012-03-02 at 13:01 -0800, Kai Gallasch wrote: >> Hi list. >> >> Trying to install 9.0 release with a USB stick. >> I use FreeBSD-9.0-RELEASE-amd64-memstick.img >> >> At first the bootup looks promising, but in the end it stops with "Root >> mount waiting for: usbus2 usbus1 usbus" >> >> To single out a bad USB stick I tried FreeBSD-8.3-BETA1-amd64-memstick.img >> with the same stick and there are no problems. >> >> The hardware is an older HP/Compaq DL145-G3, but why toss it in the trash? >> >> How can I debug this further? >> Any hints? >> >> Kai. >> >> >> ---- snip ---- >> >> SMAP type=01 base=0000000000000000 len=000000000009c000 >> SMAP type=02 base=000000000009c000 len=0000000000004000 >> SMAP type=02 base=00000000000ce000 len=0000000000032000 >> SMAP type=01 base=0000000000100000 len=00000000dbe60000 >> SMAP type=03 base=00000000dbf60000 len=0000000000007000 >> SMAP type=04 base=00000000dbf67000 len=0000000000019000 >> SMAP type=02 base=00000000dbf80000 len=0000000000080000 >> SMAP type=02 base=00000000e0000000 len=0000000010000000 >> SMAP type=02 base=00000000fec00000 len=0000000000003000 >> SMAP type=02 base=00000000fee00000 len=0000000000001000 >> SMAP type=02 base=00000000fff80000 len=0000000000080000 >> SMAP type=01 base=0000000100000000 len=0000000124000000 >> Table 'FACP' at 0xdbf62be7 >> Table 'SPMI' at 0xdbf66bf5 >> Table 'SSDT' at 0xdbf66c35 >> Table 'HPET' at 0xdbf66e7d >> Table 'SSDT' at 0xdbf66eb5 >> Table 'MCFG' at 0xdbf66efe >> Table 'SPCR' at 0xdbf66f3a >> Table 'APIC' at 0xdbf66f8a >> APIC: Found table at 0xdbf66f8a >> APIC: Using the MADT enumerator. >> MADT: Found CPU APIC ID 0 ACPI ID 0: enabled >> SMP: Added CPU 0 (AP) >> MADT: Found CPU APIC ID 1 ACPI ID 1: enabled >> SMP: Added CPU 1 (AP) >> Copyright (c) 1992-2012 The FreeBSD Project. >> Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 >> The Regents of the University of California. All rights reserved. >> FreeBSD is a registered trademark of The FreeBSD Foundation. >> FreeBSD 9.0-RELEASE #0: Tue Jan 3 07:46:30 UTC 2012 >> r...@farrell.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC amd64 >> Table 'FACP' at 0xdbf62be7 >> Table 'SPMI' at 0xdbf66bf5 >> Table 'SSDT' at 0xdbf66c35 >> Table 'HPET' at 0xdbf66e7d >> Table 'SSDT' at 0xdbf66eb5 >> Table 'MCFG' at 0xdbf66efe >> Table 'SPCR' at 0xdbf66f3a >> Table 'APIC' at 0xdbf66f8a >> ACPI: No SRAT table found >> Preloaded elf kernel "/boot/kernel/kernel" at 0xffffffff813cf000. >> Calibrating TSC clock ... TSC clock: 2394059007 Hz >> CPU: Dual-Core AMD Opteron(tm) Processor 2216 HE (2394.06-MHz K8-class CPU) >> Origin = "AuthenticAMD" Id = 0x40f13 Family = f Model = 41 Stepping = 3 >> Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT> >> Features2=0x2001<SSE3,CX16> >> AMD Features=0xea500800<SYSCALL,NX,MMX+,FFXSR,RDTSCP,LM,3DNow!+,3DNow!> >> AMD Features2=0x1f<LAHF,CMP,SVM,ExtAPIC,CR8> >> L1 2MB data TLB: 8 entries, fully associative >> L1 2MB instruction TLB: 8 entries, fully associative >> L1 4KB data TLB: 32 entries, fully associative >> L1 4KB instruction TLB: 32 entries, fully associative >> L1 data cache: 64 kbytes, 64 bytes/line, 1 lines/tag, 2-way associative >> L1 instruction cache: 64 kbytes, 64 bytes/line, 1 lines/tag, 2-way >> associative >> L2 2MB unified TLB: 0 entries, disabled/not present >> L2 4KB data TLB: 512 entries, 4-way associative >> L2 4KB instruction TLB: 512 entries, 4-way associative >> L2 unified cache: 1024 kbytes, 64 bytes/line, 1 lines/tag, 16-way associative >> real memory = 8589934592 (8192 MB) >> Physical memory chunk(s): >> 0x0000000000001000 - 0x0000000000097fff, 618496 bytes (151 pages) >> 0x0000000000100000 - 0x00000000001fffff, 1048576 bytes (256 pages) >> 0x0000000001403000 - 0x00000000dbf5ffff, 3669348352 bytes (895837 pages) >> 0x0000000100000000 - 0x0000000213e45fff, 4628701184 bytes (1130054 pages) >> avail memory = 8244486144 (7862 MB) >> Event timer "LAPIC" quality 400 >> ACPI APIC Table: <PTLTD APIC > >> INTR: Adding local APIC 1 as a target >> FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs >> FreeBSD/SMP: 1 package(s) x 2 core(s) >> cpu0 (BSP): APIC ID: 0 >> cpu1 (AP): APIC ID: 1 >> x86bios: IVT 0x000000-0x0004ff at 0xfffffe0000000000 >> x86bios: SSEG 0x001000-0x001fff at 0xffffff8000220000 >> x86bios: EBDA 0x09c000-0x09ffff at 0xfffffe000009c000 >> x86bios: ROM 0x0a0000-0x0fefff at 0xfffffe00000a0000 >> APIC: CPU 0 has ACPI ID 0 >> APIC: CPU 1 has ACPI ID 1 >> ULE: setup cpu 0 >> ULE: setup cpu 1 >> ACPI: RSDP 0xf8510 00024 (v02 PTLTD ) >> ACPI: XSDT 0xdbf62b83 00064 (v01 PTLTD ? XSDT 06040000 LTP 00000000) >> ACPI: FACP 0xdbf62be7 00084 (v02 HP TREX 06040000 MSFT 02000001) >> ACPI: DSDT 0xdbf62c6b 03F8A (v01 HP TREX 06040000 MSFT 02000002) >> ACPI: FACS 0xdbf6ffc0 00040 >> ACPI: SPMI 0xdbf66bf5 00040 (v05 HP TREX 06040000 PTL 00000001) >> ACPI: SSDT 0xdbf66c35 00248 (v01 PTLTD POWERNOW 06040000 LTP 00000001) >> ACPI: HPET 0xdbf66e7d 00038 (v01 BRCM EXPLOSN 06040000 BRCM 02000001) >> ACPI: SSDT 0xdbf66eb5 00049 (v01 PTLTD SSDT 06040000 AMD 02000001) >> ACPI: MCFG 0xdbf66efe 0003C (v01 PTLTD MCFG 06040000 AMD 02000001) >> ACPI: SPCR 0xdbf66f3a 00050 (v01 PTLTD $UCRTBL$ 06040000 PTL 00000001) >> ACPI: APIC 0xdbf66f8a 00076 (v01 PTLTD APIC 06040000 LTP 00000000) >> MADT: Found IO APIC ID 2, Interrupt 0 at 0xfec00000 >> ioapic0: Routing external 8259A's -> intpin 0 >> MADT: Found IO APIC ID 3, Interrupt 16 at 0xfec01000 >> MADT: Found IO APIC ID 4, Interrupt 32 at 0xfec02000 >> MADT: Interrupt override: source 0, irq 2 >> ioapic0: Routing IRQ 0 -> intpin 2 >> lapic0: Routing NMI -> LINT1 >> lapic0: LINT1 trigger: edge >> lapic0: LINT1 polarity: high >> lapic1: Routing NMI -> LINT1 >> lapic1: LINT1 trigger: edge >> lapic1: LINT1 polarity: high >> MADT: Forcing active-low polarity and level trigger for SCI >> ioapic0: intpin 9 polarity: low >> ioapic0: intpin 9 trigger: level >> ioapic0 <Version 1.1> irqs 0-15 on motherboard >> ioapic1 <Version 1.1> irqs 16-31 on motherboard >> ioapic2 <Version 1.1> irqs 32-47 on motherboard >> cpu0 BSP: >> ID: 0x00000000 VER: 0x80050010 LDR: 0x00000000 DFR: 0xffffffff >> lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff >> timer: 0x000100ef therm: 0x00010000 err: 0x000000f0 pmc: 0x00010400 >> snd_unit_init() u=0x00ff8000 [512] d=0x00007c00 [32] c=0x000003ff [1024] >> feeder_register: snd_unit=-1 snd_maxautovchans=16 latency=5 >> feeder_rate_min=1 feeder_rate_max=2016000 feeder_rate_round=25 >> wlan: <802.11 Link Layer> >> random: <entropy source, Software, Yarrow> >> kbd: new array size 4 >> kbd1 at kbdmux0 >> nfslock: pseudo-device >> mem: <memory> >> io: <I/O> >> null: <null device, zero device> >> hptrr: RocketRAID 17xx/2xxx SATA controller driver v1.2 >> acpi0: <PTLTD XSDT> on motherboard >> PCIe: Memory Mapped configuration base @ 0xe0000000 >> ioapic0: routing intpin 9 (ISA IRQ 9) to lapic 0 vector 48 >> acpi0: Power Button (fixed) >> unknown: I/O range not supported >> ACPI timer: 0/4 1/3 1/3 1/3 0/4 1/3 0/4 1/3 1/3 0/4 -> 6 >> Timecounter "ACPI-safe" frequency 3579545 Hz quality 850 >> acpi_timer0: <32-bit timer at 3.579545MHz> port 0x508-0x50b on acpi0 >> cpu0: <ACPI CPU> on acpi0 >> cpu0: switching to generic Cx mode >> cpu1: <ACPI CPU> on acpi0 >> pci_link0: Index IRQ Rtd Ref IRQs >> Initial Probe 0 10 N 0 10 11 >> Validation 0 10 N 0 10 11 >> After Disable 0 255 N 0 10 11 >> pci_link1: Index IRQ Rtd Ref IRQs >> Initial Probe 0 255 N 0 10 11 >> Validation 0 255 N 0 10 11 >> After Disable 0 255 N 0 10 11 >> pci_link2: Index IRQ Rtd Ref IRQs >> Initial Probe 0 255 N 0 5 7 11 >> Validation 0 255 N 0 5 7 11 >> After Disable 0 255 N 0 5 7 11 >> pci_link3: Index IRQ Rtd Ref IRQs >> Initial Probe 0 255 N 0 3 4 5 7 11 12 14 15 >> Validation 0 255 N 0 3 4 5 7 11 12 14 15 >> After Disable 0 255 N 0 3 4 5 7 11 12 14 15 >> pci_link4: Index IRQ Rtd Ref IRQs >> Initial Probe 0 255 N 0 3 4 5 7 11 12 14 15 >> Validation 0 255 N 0 3 4 5 7 11 12 14 15 >> After Disable 0 255 N 0 3 4 5 7 11 12 14 15 >> pci_link5: Index IRQ Rtd Ref IRQs >> Initial Probe 0 255 N 0 3 4 5 7 11 12 14 15 >> Validation 0 255 N 0 3 4 5 7 11 12 14 15 >> After Disable 0 255 N 0 3 4 5 7 11 12 14 15 >> pci_link6: Index IRQ Rtd Ref IRQs >> Initial Probe 0 255 N 0 3 4 5 7 11 12 14 15 >> Validation 0 255 N 0 3 4 5 7 11 12 14 15 >> After Disable 0 255 N 0 3 4 5 7 11 12 14 15 >> pci_link7: Index IRQ Rtd Ref IRQs >> Initial Probe 0 255 N 0 3 4 5 7 11 12 14 15 >> Validation 0 255 N 0 3 4 5 7 11 12 14 15 >> After Disable 0 255 N 0 3 4 5 7 11 12 14 15 >> pci_link8: Index IRQ Rtd Ref IRQs >> Initial Probe 0 255 N 0 3 4 5 7 11 12 14 15 >> Validation 0 255 N 0 3 4 5 7 11 12 14 15 >> After Disable 0 255 N 0 3 4 5 7 11 12 14 15 >> pci_link9: Index IRQ Rtd Ref IRQs >> Initial Probe 0 255 N 0 3 4 5 7 11 12 14 15 >> Validation 0 255 N 0 3 4 5 7 11 12 14 15 >> After Disable 0 255 N 0 3 4 5 7 11 12 14 15 >> pci_link10: Index IRQ Rtd Ref IRQs >> Initial Probe 0 5 N 0 3 4 5 7 11 12 14 15 >> Validation 0 5 N 0 3 4 5 7 11 12 14 15 >> After Disable 0 255 N 0 3 4 5 7 11 12 14 15 >> pci_link11: Index IRQ Rtd Ref IRQs >> Initial Probe 0 255 N 0 3 4 5 7 11 12 14 15 >> Validation 0 255 N 0 3 4 5 7 11 12 14 15 >> After Disable 0 255 N 0 3 4 5 7 11 12 14 15 >> pci_link12: Index IRQ Rtd Ref IRQs >> Initial Probe 0 255 N 0 3 4 5 7 11 12 14 15 >> Validation 0 255 N 0 3 4 5 7 11 12 14 15 >> After Disable 0 255 N 0 3 4 5 7 11 12 14 15 >> pci_link13: Index IRQ Rtd Ref IRQs >> Initial Probe 0 255 N 0 3 4 5 7 11 12 14 15 >> Validation 0 255 N 0 3 4 5 7 11 12 14 15 >> After Disable 0 255 N 0 3 4 5 7 11 12 14 15 >> pci_link14: Index IRQ Rtd Ref IRQs >> Initial Probe 0 255 N 0 3 4 5 7 11 12 14 15 >> Validation 0 255 N 0 3 4 5 7 11 12 14 15 >> After Disable 0 255 N 0 3 4 5 7 11 12 14 15 >> pci_link15: Index IRQ Rtd Ref IRQs >> Initial Probe 0 255 N 0 3 4 5 7 11 12 14 15 >> Validation 0 255 N 0 3 4 5 7 11 12 14 15 >> After Disable 0 255 N 0 3 4 5 7 11 12 14 15 >> pci_link16: Index IRQ Rtd Ref IRQs >> Initial Probe 0 255 N 0 3 4 5 7 11 12 14 15 >> Validation 0 255 N 0 3 4 5 7 11 12 14 15 >> After Disable 0 255 N 0 3 4 5 7 11 12 14 15 >> pci_link17: Index IRQ Rtd Ref IRQs >> Initial Probe 0 255 N 0 3 4 5 7 11 12 14 15 >> Validation 0 255 N 0 3 4 5 7 11 12 14 15 >> After Disable 0 255 N 0 3 4 5 7 11 12 14 15 >> pci_link18: Index IRQ Rtd Ref IRQs >> Initial Probe 0 255 N 0 3 4 5 7 11 12 14 15 >> Validation 0 255 N 0 3 4 5 7 11 12 14 15 >> After Disable 0 255 N 0 3 4 5 7 11 12 14 15 >> pci_link19: Index IRQ Rtd Ref IRQs >> Initial Probe 0 7 N 0 3 4 5 7 11 12 14 15 >> Validation 0 7 N 0 3 4 5 7 11 12 14 15 >> After Disable 0 255 N 0 3 4 5 7 11 12 14 15 >> pci_link20: Index IRQ Rtd Ref IRQs >> Initial Probe 0 255 N 0 3 4 5 7 11 12 14 15 >> Validation 0 255 N 0 3 4 5 7 11 12 14 15 >> After Disable 0 255 N 0 3 4 5 7 11 12 14 15 >> pci_link21: Index IRQ Rtd Ref IRQs >> Initial Probe 0 255 N 0 3 4 5 7 11 12 14 15 >> Validation 0 255 N 0 3 4 5 7 11 12 14 15 >> After Disable 0 255 N 0 3 4 5 7 11 12 14 15 >> pci_link22: Index IRQ Rtd Ref IRQs >> Initial Probe 0 255 N 0 3 4 5 7 11 12 14 15 >> Validation 0 255 N 0 3 4 5 7 11 12 14 15 >> After Disable 0 255 N 0 3 4 5 7 11 12 14 15 >> pci_link23: Index IRQ Rtd Ref IRQs >> Initial Probe 0 5 N 0 3 4 5 7 11 12 14 15 >> Validation 0 5 N 0 3 4 5 7 11 12 14 15 >> After Disable 0 255 N 0 3 4 5 7 11 12 14 15 >> pci_link24: Index IRQ Rtd Ref IRQs >> Initial Probe 0 255 N 0 3 4 5 7 11 12 14 15 >> Validation 0 255 N 0 3 4 5 7 11 12 14 15 >> After Disable 0 255 N 0 3 4 5 7 11 12 14 15 >> pci_link25: Index IRQ Rtd Ref IRQs >> Initial Probe 0 255 N 0 3 4 5 7 11 12 14 15 >> Validation 0 255 N 0 3 4 5 7 11 12 14 15 >> After Disable 0 255 N 0 3 4 5 7 11 12 14 15 >> pci_link26: Index IRQ Rtd Ref IRQs >> Initial Probe 0 255 N 0 3 4 5 7 11 12 14 15 >> Validation 0 255 N 0 3 4 5 7 11 12 14 15 >> After Disable 0 255 N 0 3 4 5 7 11 12 14 15 >> pci_link27: Index IRQ Rtd Ref IRQs >> Initial Probe 0 255 N 0 3 4 5 7 11 12 14 15 >> Validation 0 255 N 0 3 4 5 7 11 12 14 15 >> After Disable 0 255 N 0 3 4 5 7 11 12 14 15 >> pci_link28: Index IRQ Rtd Ref IRQs >> Initial Probe 0 255 N 0 3 4 5 7 11 12 14 15 >> Validation 0 255 N 0 3 4 5 7 11 12 14 15 >> After Disable 0 255 N 0 3 4 5 7 11 12 14 15 >> pci_link29: Index IRQ Rtd Ref IRQs >> Initial Probe 0 255 N 0 3 4 5 7 11 12 14 15 >> Validation 0 255 N 0 3 4 5 7 11 12 14 15 >> After Disable 0 255 N 0 3 4 5 7 11 12 14 15 >> pci_link30: Index IRQ Rtd Ref IRQs >> Initial Probe 0 255 N 0 3 4 5 7 11 12 14 15 >> Validation 0 255 N 0 3 4 5 7 11 12 14 15 >> After Disable 0 255 N 0 3 4 5 7 11 12 14 15 >> pci_link31: Index IRQ Rtd Ref IRQs >> Initial Probe 0 255 N 0 3 4 5 7 11 12 14 15 >> Validation 0 255 N 0 3 4 5 7 11 12 14 15 >> After Disable 0 255 N 0 3 4 5 7 11 12 14 15 >> pci_link32: Index IRQ Rtd Ref IRQs >> Initial Probe 0 255 N 0 3 4 5 7 11 12 14 15 >> Validation 0 255 N 0 3 4 5 7 11 12 14 15 >> After Disable 0 255 N 0 3 4 5 7 11 12 14 15 >> pci_link33: Index IRQ Rtd Ref IRQs >> Initial Probe 0 11 N 0 3 4 5 7 11 12 14 15 >> Validation 0 11 N 0 3 4 5 7 11 12 14 15 >> After Disable 0 255 N 0 3 4 5 7 11 12 14 15 >> pci_link34: Index IRQ Rtd Ref IRQs >> Initial Probe 0 255 N 0 3 4 5 7 11 12 14 15 >> Validation 0 255 N 0 3 4 5 7 11 12 14 15 >> After Disable 0 255 N 0 3 4 5 7 11 12 14 15 >> hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 >> hpet0: vendor 0x1166, rev 0x1, 14318180Hz 64bit, 3 timers, legacy route >> hpet0: t0: irqs 0xffffffff (0), periodic >> hpet0: t1: irqs 0xffffffff (0), periodic >> hpet0: t2: irqs 0xffffffff (0), periodic >> Timecounter "HPET" frequency 14318180 Hz quality 950 >> ioapic1: routing intpin 0 (PCI IRQ 16) to lapic 0 vector 49 >> Event timer "HPET" frequency 14318180 Hz quality 450 >> Event timer "HPET1" frequency 14318180 Hz quality 450 >> Event timer "HPET2" frequency 14318180 Hz quality 450 >> pcib0: <ACPI Host-PCI bridge> on acpi0 >> pcib0: decoding 4 range 0-0x3af >> pcib0: decoding 4 range 0x3e0-0xfff >> pcib0: decoding 4 range 0x3b0-0x3df >> pcib0: decoding 3 range 0xa0000-0xbffff >> pcib0: decoding 4 range 0x1000-0x2fff >> pcib0: decoding 4 range 0x3000-0xffff >> pcib0: decoding 3 range 0xdf000000-0xdfcfffff >> pcib0: decoding 3 range 0xde000000-0xdeffffff >> pcib0: decoding 3 range 0xfe000000-0xfebfffff >> pcib0: decoding 3 range 0xfec04000-0xfecfffff >> pcib0: decoding 3 range 0xfed00400-0xfed07fff >> pcib0: decoding 3 range 0xfed08008-0xfedfffff >> pcib0: decoding 3 range 0xfee01000-0xffffffff >> ACPI: Found matching pin for 0.3.INTA at func 0: 10 >> pci0: <ACPI PCI bus> on pcib0 >> pci0: domain=0, physical bus=0 >> found-> vendor=0x1166, dev=0x0036, revid=0x00 >> domain=0, bus=0, slot=1, func=0 >> class=06-04-00, hdrtype=0x01, mfdev=0 >> cmdreg=0x0147, statreg=0x0010, cachelnsz=0 (dwords) >> lattimer=0x40 (1920 ns), mingnt=0x07 (1750 ns), maxlat=0x00 (0 ns) >> found-> vendor=0x1166, dev=0x0205, revid=0x00 >> domain=0, bus=0, slot=2, func=0 >> class=06-00-00, hdrtype=0x00, mfdev=1 >> cmdreg=0x0147, statreg=0x0200, cachelnsz=0 (dwords) >> lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) >> found-> vendor=0x1166, dev=0x0214, revid=0x00 >> domain=0, bus=0, slot=2, func=1 >> class=01-01-8a, hdrtype=0x00, mfdev=1 >> cmdreg=0x0155, statreg=0x0210, cachelnsz=16 (dwords) >> lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) >> powerspec 2 supports D0 D3 current D0 >> pcib0: allocated type 4 (0x1f0-0x1f7) for rid 10 of pci0:0:2:1 >> pcib0: allocated type 4 (0x3f6-0x3f6) for rid 14 of pci0:0:2:1 >> pcib0: allocated type 4 (0x170-0x177) for rid 18 of pci0:0:2:1 >> pcib0: allocated type 4 (0x376-0x376) for rid 1c of pci0:0:2:1 >> map[20]: type I/O Port, range 32, base 0x1c00, size 4, enabled >> pcib0: allocated type 4 (0x1c00-0x1c0f) for rid 20 of pci0:0:2:1 >> found-> vendor=0x1166, dev=0x0234, revid=0x00 >> domain=0, bus=0, slot=2, func=2 >> class=06-01-00, hdrtype=0x00, mfdev=1 >> cmdreg=0x0147, statreg=0x0200, cachelnsz=0 (dwords) >> lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) >> found-> vendor=0x1166, dev=0x0223, revid=0x01 >> domain=0, bus=0, slot=3, func=0 >> class=0c-03-10, hdrtype=0x00, mfdev=1 >> cmdreg=0x0157, statreg=0x02b0, cachelnsz=16 (dwords) >> lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) >> intpin=a, irq=10 >> powerspec 2 supports D0 D3 current D0 >> map[10]: type Memory, range 32, base 0xdfc05000, size 12, enabled >> pcib0: allocated type 3 (0xdfc05000-0xdfc05fff) for rid 10 of pci0:0:3:0 >> map[14]: type I/O Port, range 32, base 0x1000, size 8, enabled >> pcib0: allocated type 4 (0x1000-0x10ff) for rid 14 of pci0:0:3:0 >> pcib0: matched entry for 0.3.INTA (src \_SB_.LNKU:0) >> ioapic0: Changing trigger for pin 10 to level >> ioapic0: Changing polarity for pin 10 to low >> pcib0: slot 3 INTA routed to irq 10 via \_SB_.LNKU >> found-> vendor=0x1166, dev=0x0223, revid=0x01 >> domain=0, bus=0, slot=3, func=1 >> class=0c-03-10, hdrtype=0x00, mfdev=0 >> cmdreg=0x0157, statreg=0x02b0, cachelnsz=16 (dwords) >> lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) >> intpin=a, irq=10 >> powerspec 2 supports D0 D3 current D0 >> map[10]: type Memory, range 32, base 0xdfc06000, size 12, enabled >> pcib0: allocated type 3 (0xdfc06000-0xdfc06fff) for rid 10 of pci0:0:3:1 >> map[14]: type I/O Port, range 32, base 0x1400, size 8, enabled >> pcib0: allocated type 4 (0x1400-0x14ff) for rid 14 of pci0:0:3:1 >> pcib0: matched entry for 0.3.INTA (src \_SB_.LNKU:0) >> pcib0: slot 3 INTA routed to irq 10 via \_SB_.LNKU >> found-> vendor=0x1166, dev=0x0223, revid=0x01 >> domain=0, bus=0, slot=3, func=2 >> class=0c-03-20, hdrtype=0x00, mfdev=0 >> cmdreg=0x0117, statreg=0x02b0, cachelnsz=16 (dwords) >> lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) >> intpin=a, irq=10 >> powerspec 2 supports D0 D1 D2 D3 current D0 >> map[10]: type Memory, range 32, base 0xdfc07000, size 12, enabled >> pcib0: allocated type 3 (0xdfc07000-0xdfc07fff) for rid 10 of pci0:0:3:2 >> map[14]: type I/O Port, range 32, base 0x1800, size 8, enabled >> pcib0: allocated type 4 (0x1800-0x18ff) for rid 14 of pci0:0:3:2 >> pcib0: matched entry for 0.3.INTA (src \_SB_.LNKU:0) >> pcib0: slot 3 INTA routed to irq 10 via \_SB_.LNKU >> found-> vendor=0x102b, dev=0x0522, revid=0x02 >> domain=0, bus=0, slot=4, func=0 >> class=03-00-00, hdrtype=0x00, mfdev=0 >> cmdreg=0x0007, statreg=0x0290, cachelnsz=16 (dwords) >> lattimer=0x80 (3840 ns), mingnt=0x10 (4000 ns), maxlat=0x20 (8000 ns) >> intpin=a, irq=5 >> powerspec 1 supports D0 D3 current D0 >> map[10]: type Prefetchable Memory, range 32, base 0xde000000, size >> 24, enabled >> pcib0: allocated type 3 (0xde000000-0xdeffffff) for rid 10 of pci0:0:4:0 >> map[14]: type Memory, range 32, base 0xdfc00000, size 14, enabled >> pcib0: allocated type 3 (0xdfc00000-0xdfc03fff) for rid 14 of pci0:0:4:0 >> map[18]: type Memory, range 32, base 0xdf000000, size 23, enabled >> pcib0: allocated type 3 (0xdf000000-0xdf7fffff) for rid 18 of pci0:0:4:0 >> pcib0: matched entry for 0.4.INTA >> pcib0: slot 4 INTA hardwired to IRQ 23 >> found-> vendor=0x1166, dev=0x0140, revid=0xa2 >> domain=0, bus=0, slot=6, func=0 >> class=06-04-00, hdrtype=0x01, mfdev=0 >> cmdreg=0x0147, statreg=0x4010, cachelnsz=16 (dwords) >> lattimer=0x00 (0 ns), mingnt=0x07 (1750 ns), maxlat=0x00 (0 ns) >> intpin=a, irq=11 >> powerspec 3 supports D0 D3 current D0 >> MSI supports 2 messages, 64 bit >> pcib0: matched entry for 0.6.INTA >> pcib0: slot 6 INTA hardwired to IRQ 32 >> found-> vendor=0x1166, dev=0x0142, revid=0xa2 >> domain=0, bus=0, slot=7, func=0 >> class=06-04-00, hdrtype=0x01, mfdev=0 >> cmdreg=0x0147, statreg=0x0010, cachelnsz=16 (dwords) >> lattimer=0x00 (0 ns), mingnt=0x07 (1750 ns), maxlat=0x00 (0 ns) >> intpin=a, irq=11 >> powerspec 3 supports D0 D3 current D0 >> MSI supports 2 messages, 64 bit >> pcib0: matched entry for 0.7.INTA >> pcib0: slot 7 INTA hardwired to IRQ 32 >> found-> vendor=0x1166, dev=0x0144, revid=0xa2 >> domain=0, bus=0, slot=8, func=0 >> class=06-04-00, hdrtype=0x01, mfdev=0 >> cmdreg=0x0147, statreg=0x0010, cachelnsz=16 (dwords) >> lattimer=0x00 (0 ns), mingnt=0x07 (1750 ns), maxlat=0x00 (0 ns) >> intpin=a, irq=11 >> powerspec 3 supports D0 D3 current D0 >> MSI supports 2 messages, 64 bit >> pcib0: matched entry for 0.8.INTA >> pcib0: slot 8 INTA hardwired to IRQ 32 >> found-> vendor=0x1166, dev=0x0142, revid=0xa2 >> domain=0, bus=0, slot=9, func=0 >> class=06-04-00, hdrtype=0x01, mfdev=0 >> cmdreg=0x0147, statreg=0x0010, cachelnsz=16 (dwords) >> lattimer=0x00 (0 ns), mingnt=0x07 (1750 ns), maxlat=0x00 (0 ns) >> intpin=a, irq=11 >> powerspec 3 supports D0 D3 current D0 >> MSI supports 2 messages, 64 bit >> pcib0: matched entry for 0.9.INTA >> pcib0: slot 9 INTA hardwired to IRQ 32 >> found-> vendor=0x1166, dev=0x0144, revid=0xa2 >> domain=0, bus=0, slot=10, func=0 >> class=06-04-00, hdrtype=0x01, mfdev=0 >> cmdreg=0x0147, statreg=0x0010, cachelnsz=16 (dwords) >> lattimer=0x00 (0 ns), mingnt=0x07 (1750 ns), maxlat=0x00 (0 ns) >> intpin=a, irq=11 >> powerspec 3 supports D0 D3 current D0 >> MSI supports 2 messages, 64 bit >> pcib0: matched entry for 0.10.INTA >> pcib0: slot 10 INTA hardwired to IRQ 32 >> found-> vendor=0x1022, dev=0x1100, revid=0x00 >> domain=0, bus=0, slot=24, func=0 >> class=06-00-00, hdrtype=0x00, mfdev=1 >> cmdreg=0x0000, statreg=0x0010, cachelnsz=0 (dwords) >> lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) >> found-> vendor=0x1022, dev=0x1101, revid=0x00 >> domain=0, bus=0, slot=24, func=1 >> class=06-00-00, hdrtype=0x00, mfdev=1 >> cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords) >> lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) >> found-> vendor=0x1022, dev=0x1102, revid=0x00 >> domain=0, bus=0, slot=24, func=2 >> class=06-00-00, hdrtype=0x00, mfdev=1 >> cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords) >> lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) >> found-> vendor=0x1022, dev=0x1103, revid=0x00 >> domain=0, bus=0, slot=24, func=3 >> class=06-00-00, hdrtype=0x00, mfdev=1 >> cmdreg=0x0000, statreg=0x0010, cachelnsz=0 (dwords) >> lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) >> pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0 >> pcib1: domain 0 >> pcib1: secondary bus 1 >> pcib1: subordinate bus 2 >> pcib1: no prefetched decode >> pci1: <ACPI PCI bus> on pcib1 >> pci1: domain=0, physical bus=1 >> found-> vendor=0x1166, dev=0x0104, revid=0xc0 >> domain=0, bus=1, slot=13, func=0 >> class=06-04-00, hdrtype=0x01, mfdev=0 >> cmdreg=0x0157, statreg=0x0230, cachelnsz=16 (dwords) >> lattimer=0x40 (1920 ns), mingnt=0x07 (1750 ns), maxlat=0x02 (500 ns) >> pcib2: <ACPI PCI-PCI bridge> at device 13.0 on pci1 >> pcib2: domain 0 >> pcib2: secondary bus 2 >> pcib2: subordinate bus 2 >> pcib2: no prefetched decode >> pci2: <ACPI PCI bus> on pcib2 >> pci2: domain=0, physical bus=2 >> atapci0: <ServerWorks HT1000 UDMA100 controller> port >> 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x1c00-0x1c0f at device 2.1 on pci0 >> ata0: <ATA channel 0> on atapci0 >> ioapic0: routing intpin 14 (ISA IRQ 14) to lapic 0 vector 50 >> ata1: <ATA channel 1> on atapci0 >> ioapic0: routing intpin 15 (ISA IRQ 15) to lapic 0 vector 51 >> isab0: <PCI-ISA bridge> at device 2.2 on pci0 >> isa0: <ISA bus> on isab0 >> ohci0: <OHCI (generic) USB controller> port 0x1000-0x10ff mem >> 0xdfc05000-0xdfc05fff irq 10 at device 3.0 on pci0 >> ohci0: (New OHCI DeviceId=0x02231166) >> ioapic0: routing intpin 10 (ISA IRQ 10) to lapic 0 vector 52 >> usbus0: <OHCI (generic) USB controller> on ohci0 >> usbus0: bpf attached >> ohci0: usbpf: Attached >> ohci1: <OHCI (generic) USB controller> port 0x1400-0x14ff mem >> 0xdfc06000-0xdfc06fff irq 10 at device 3.1 on pci0 >> ohci1: (New OHCI DeviceId=0x02231166) >> usbus1: <OHCI (generic) USB controller> on ohci1 >> usbus1: bpf attached >> ohci1: usbpf: Attached >> ehci0: <EHCI (generic) USB 2.0 controller> port 0x1800-0x18ff mem >> 0xdfc07000-0xdfc07fff irq 10 at device 3.2 on pci0 >> ehci0: (New EHCI DeviceId=0x02231166) >> usbus2: EHCI version 1.0 >> usbus2: <EHCI (generic) USB 2.0 controller> on ehci0 >> usbus2: bpf attached >> ehci0: usbpf: Attached >> vgapci0: <VGA-compatible display> mem >> 0xde000000-0xdeffffff,0xdfc00000-0xdfc03fff,0xdf000000-0xdf7fffff irq 23 at >> device 4.0 on pci0 >> pcib3: <ACPI PCI-PCI bridge> irq 32 at device 6.0 on pci0 >> pcib0: allocated type 4 (0x2000-0x2fff) for rid 1c of pcib3 >> pcib0: allocated type 3 (0xdfa00000-0xdfafffff) for rid 20 of pcib3 >> pcib3: domain 0 >> pcib3: secondary bus 3 >> pcib3: subordinate bus 3 >> pcib3: I/O decode 0x2000-0x2fff >> pcib3: memory decode 0xdfa00000-0xdfafffff >> pcib3: no prefetched decode >> pci3: <ACPI PCI bus> on pcib3 >> pci3: domain=0, physical bus=3 >> found-> vendor=0x1000, dev=0x0058, revid=0x08 >> domain=0, bus=3, slot=0, func=0 >> class=01-00-00, hdrtype=0x00, mfdev=0 >> cmdreg=0x0147, statreg=0x4010, cachelnsz=16 (dwords) >> lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) >> intpin=a, irq=7 >> powerspec 2 supports D0 D1 D2 D3 current D0 >> MSI supports 1 message, 64 bit >> MSI-X supports 1 message in map 0x14 >> map[10]: type I/O Port, range 32, base 0x2000, size 8, enabled >> pcib3: allocated I/O port range (0x2000-0x20ff) for rid 10 of pci0:3:0:0 >> map[14]: type Memory, range 64, base 0xdfa10000, size 14, enabled >> pcib3: allocated memory range (0xdfa10000-0xdfa13fff) for rid 14 of >> pci0:3:0:0 >> map[1c]: type Memory, range 64, base 0xdfa00000, size 16, enabled >> pcib3: allocated memory range (0xdfa00000-0xdfa0ffff) for rid 1c of >> pci0:3:0:0 >> pcib3: matched entry for 3.0.INTA >> pcib3: slot 0 INTA hardwired to IRQ 32 >> mpt0: <LSILogic SAS/SATA Adapter> port 0x2000-0x20ff mem >> 0xdfa10000-0xdfa13fff,0xdfa00000-0xdfa0ffff irq 32 at device 0.0 on pci3 >> mpt0: attempting to allocate 1 MSI-X vectors (1 supported) >> msi: routing MSI-X IRQ 256 to local APIC 0 vector 53 >> mpt0: using IRQ 256 for MSI-X >> mpt0: MPI Version=1.5.20.0 >> mpt0: chain depth limited to 34 (from 2040) >> mpt0: Maximum Segment Count: 306, Maximum CAM Segment Count: 33 >> mpt0: MsgLength=20 IOCNumber = 0 >> mpt0: IOCFACTS: GlobalCredits=483 BlockSize=8 bytes Request Frame Size 128 >> bytes Max Chain Depth 34 >> mpt0: IOCFACTS: Num Ports 1, FWImageSize 0, Flags=0x2 >> mpt0: No Handlers For Any Event Notify Frames. Event 0xa (ACK not required). >> mpt0: No Handlers For Any Event Notify Frames. Event 0x16 (ACK not required). >> mpt0: No Handlers For Any Event Notify Frames. Event 0x12 (ACK not required). >> mpt0: No Handlers For Any Event Notify Frames. Event 0x16 (ACK not required). >> mpt0: No Handlers For Any Event Notify Frames. Event 0x16 (ACK not required). >> mpt0: No Handlers For Any Event Notify Frames. Event 0x12 (ACK not required). >> mpt0: No Handlers For Any Event Notify Frames. Event 0x16 (ACK not required). >> mpt0: No Handlers For Any Event Notify Frames. Event 0x16 (ACK not required). >> mpt0: No Handlers For Any Event Notify Frames. Event 0xf (ACK not required). >> mpt0: No Handlers For Any Event Notify Frames. Event 0xf (ACK not required). >> mpt0: No Handlers For Any Event Notify Frames. Event 0x16 (ACK not required). >> mpt0: No Handlers For Any Event Notify Frames. Event 0xa (ACK not required). >> pcib4: <ACPI PCI-PCI bridge> irq 32 at device 7.0 on pci0 >> pcib4: domain 0 >> pcib4: secondary bus 4 >> pcib4: subordinate bus 4 >> pcib4: no prefetched decode >> pci4: <ACPI PCI bus> on pcib4 >> pci4: domain=0, physical bus=4 >> pcib5: <ACPI PCI-PCI bridge> irq 32 at device 8.0 on pci0 >> pcib5: domain 0 >> pcib5: secondary bus 5 >> pcib5: subordinate bus 5 >> pcib5: no prefetched decode >> pci5: <ACPI PCI bus> on pcib5 >> pci5: domain=0, physical bus=5 >> pcib6: <ACPI PCI-PCI bridge> irq 32 at device 9.0 on pci0 >> pcib6: domain 0 >> pcib6: secondary bus 6 >> pcib6: subordinate bus 6 >> pcib6: no prefetched decode >> pci6: <ACPI PCI bus> on pcib6 >> pci6: domain=0, physical bus=6 >> pcib7: <ACPI PCI-PCI bridge> irq 32 at device 10.0 on pci0 >> pcib0: allocated type 3 (0xdfb00000-0xdfbfffff) for rid 20 of pcib7 >> pcib7: domain 0 >> pcib7: secondary bus 7 >> pcib7: subordinate bus 8 >> pcib7: memory decode 0xdfb00000-0xdfbfffff >> pcib7: no prefetched decode >> pcib7: could not get PCI interrupt routing table for \_SB_.PCI0.EXB4 - >> AE_NOT_FOUND >> pci7: <ACPI PCI bus> on pcib7 >> pci7: domain=0, physical bus=7 >> found-> vendor=0x1166, dev=0x0103, revid=0xb5 >> domain=0, bus=7, slot=0, func=0 >> class=06-04-00, hdrtype=0x01, mfdev=0 >> cmdreg=0x0147, statreg=0x0010, cachelnsz=16 (dwords) >> lattimer=0x00 (0 ns), mingnt=0x07 (1750 ns), maxlat=0x00 (0 ns) >> powerspec 2 supports D0 D3 current D0 >> pcib8: <ACPI PCI-PCI bridge> at device 0.0 on pci7 >> pcib7: allocated memory range (0xdfb00000-0xdfbfffff) for rid 20 of pcib8 >> pcib8: domain 0 >> pcib8: secondary bus 8 >> pcib8: subordinate bus 8 >> pcib8: memory decode 0xdfb00000-0xdfbfffff >> pcib8: no prefetched decode >> pci8: <ACPI PCI bus> on pcib8 >> pci8: domain=0, physical bus=8 >> found-> vendor=0x14e4, dev=0x1678, revid=0xa3 >> domain=0, bus=8, slot=4, func=0 >> class=02-00-00, hdrtype=0x00, mfdev=1 >> cmdreg=0x0156, statreg=0x02b0, cachelnsz=16 (dwords) >> lattimer=0x40 (1920 ns), mingnt=0x40 (16000 ns), maxlat=0x00 (0 ns) >> intpin=a, irq=5 >> powerspec 2 supports D0 D3 current D0 >> MSI supports 8 messages, 64 bit >> map[10]: type Memory, range 64, base 0xdfb10000, size 16, enabled >> pcib8: allocated memory range (0xdfb10000-0xdfb1ffff) for rid 10 of >> pci0:8:4:0 >> map[18]: type Memory, range 64, base 0xdfb00000, size 16, enabled >> pcib8: allocated memory range (0xdfb00000-0xdfb0ffff) for rid 18 of >> pci0:8:4:0 >> pcib8: matched entry for 8.4.INTA >> pcib8: slot 4 INTA hardwired to IRQ 36 >> found-> vendor=0x14e4, dev=0x1678, revid=0xa3 >> domain=0, bus=8, slot=4, func=1 >> class=02-00-00, hdrtype=0x00, mfdev=1 >> cmdreg=0x0156, statreg=0x02b0, cachelnsz=16 (dwords) >> lattimer=0x40 (1920 ns), mingnt=0x40 (16000 ns), maxlat=0x00 (0 ns) >> intpin=b, irq=5 >> powerspec 2 supports D0 D3 current D0 >> MSI supports 8 messages, 64 bit >> map[10]: type Memory, range 64, base 0xdfb30000, size 16, enabled >> pcib8: allocated memory range (0xdfb30000-0xdfb3ffff) for rid 10 of >> pci0:8:4:1 >> map[18]: type Memory, range 64, base 0xdfb20000, size 16, enabled >> pcib8: allocated memory range (0xdfb20000-0xdfb2ffff) for rid 18 of >> pci0:8:4:1 >> pcib8: matched entry for 8.4.INTB >> pcib8: slot 4 INTB hardwired to IRQ 36 >> bge0: <Broadcom NetXtreme Gigabit Ethernet Controller, ASIC rev. 0x009003> >> mem 0xdfb10000-0xdfb1ffff,0xdfb00000-0xdfb0ffff irq 36 at device 4.0 on pci8 >> bge0: attempting to allocate 1 MSI vectors (8 supported) >> msi: routing MSI IRQ 257 to local APIC 0 vector 54 >> bge0: using IRQ 257 for MSI >> bge0: CHIP ID 0x00009003; ASIC REV 0x09; CHIP REV 0x90; PCI-X >> miibus0: <MII bus> on bge0 >> brgphy0: <BCM5714 1000BASE-T media interface> PHY 1 on miibus0 >> brgphy0: OUI 0x001018, model 0x0034, rev. 0 >> brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, >> 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow >> bge0: bpf attached >> bge0: Ethernet address: 00:18:71:87:0f:ac >> bge1: <Broadcom NetXtreme Gigabit Ethernet Controller, ASIC rev. 0x009003> >> mem 0xdfb30000-0xdfb3ffff,0xdfb20000-0xdfb2ffff irq 36 at device 4.1 on pci8 >> bge1: attempting to allocate 1 MSI vectors (8 supported) >> msi: routing MSI IRQ 258 to local APIC 0 vector 55 >> bge1: using IRQ 258 for MSI >> bge1: CHIP ID 0x00009003; ASIC REV 0x09; CHIP REV 0x90; PCI-X >> miibus1: <MII bus> on bge1 >> brgphy1: <BCM5714 1000BASE-T media interface> PHY 1 on miibus1 >> brgphy1: OUI 0x001018, model 0x0034, rev. 0 >> brgphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, >> 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow >> bge1: bpf attached >> bge1: Ethernet address: 00:18:71:87:64:f6 >> atrtc0: <AT realtime clock> port 0x70-0x71,0x72-0x73 on acpi0 >> atrtc0: registered as a time-of-day clock (resolution 1000000us, adjustment >> 0.500000000s) >> ioapic0: routing intpin 8 (ISA IRQ 8) to lapic 0 vector 56 >> Event timer "RTC" frequency 32768 Hz quality 0 >> attimer0: <AT timer> port 0x40-0x43 on acpi0 >> Timecounter "i8254" frequency 1193182 Hz quality 0 >> ioapic0: routing intpin 2 (ISA IRQ 0) to lapic 0 vector 57 >> Event timer "i8254" frequency 1193182 Hz quality 100 >> atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 >> atkbd0: <AT Keyboard> irq 1 on atkbdc0 >> atkbd: the current kbd controller command byte 0047 >> atkbd: keyboard ID 0xffffffff (1) >> kbdc: RESET_KBD return code:00fe >> kbdc: RESET_KBD return code:00fe >> kbdc: RESET_KBD return code:00fe >> kbdc: DIAGNOSE status:0055 >> kbdc: TEST_KBD_PORT status:0000 >> atkbd: failed to reset the keyboard. >> kbd0 at atkbd0 >> kbd0: atkbd0, AT 84 (1), config:0x0, flags:0x3d0000 >> ioapic0: routing intpin 1 (ISA IRQ 1) to lapic 0 vector 58 >> atkbd0: [GIANT-LOCKED] >> psm0: unable to allocate IRQ >> uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 >> ioapic0: routing intpin 4 (ISA IRQ 4) to lapic 0 vector 59 >> uart0: fast interrupt >> uart0: console (9600,n,8,1) >> acpi0: wakeup code va 0xffffff8233373000 pa 0x4000 >> ex_isa_identify() >> ahc_isa_probe 0: ioport 0xc00 alloc failed >> ahc_isa_probe 1: ioport 0x1c00 alloc failed >> ahc_isa_probe 2: ioport 0x2c00 alloc failed >> ahc_isa_probe 3: ioport 0x3c00 alloc failed >> ahc_isa_probe 4: ioport 0x4c00 alloc failed >> ahc_isa_probe 5: ioport 0x5c00 alloc failed >> ahc_isa_probe 6: ioport 0x6c00 alloc failed >> ahc_isa_probe 7: ioport 0x7c00 alloc failed >> ahc_isa_probe 8: ioport 0x8c00 alloc failed >> ahc_isa_probe 9: ioport 0x9c00 alloc failed >> ahc_isa_probe 10: ioport 0xac00 alloc failed >> ahc_isa_probe 11: ioport 0xbc00 alloc failed >> ahc_isa_probe 12: ioport 0xcc00 alloc failed >> ahc_isa_probe 13: ioport 0xdc00 alloc failed >> ahc_isa_probe 14: ioport 0xec00 alloc failed >> pcib0: allocated type 3 (0xa0000-0xa07ff) for rid 0 of orm0 >> pcib0: allocated type 3 (0xa0800-0xa0fff) for rid 0 of orm0 >> pcib0: allocated type 3 (0xa1000-0xa17ff) for rid 0 of orm0 >> pcib0: allocated type 3 (0xa1800-0xa1fff) for rid 0 of orm0 >> pcib0: allocated type 3 (0xa2000-0xa27ff) for rid 0 of orm0 >> pcib0: allocated type 3 (0xa2800-0xa2fff) for rid 0 of orm0 >> pcib0: allocated type 3 (0xa3000-0xa37ff) for rid 0 of orm0 >> pcib0: allocated type 3 (0xa3800-0xa3fff) for rid 0 of orm0 >> pcib0: allocated type 3 (0xa4000-0xa47ff) for rid 0 of orm0 >> pcib0: allocated type 3 (0xa4800-0xa4fff) for rid 0 of orm0 >> pcib0: allocated type 3 (0xa5000-0xa57ff) for rid 0 of orm0 >> pcib0: allocated type 3 (0xa5800-0xa5fff) for rid 0 of orm0 >> pcib0: allocated type 3 (0xa6000-0xa67ff) for rid 0 of orm0 >> pcib0: allocated type 3 (0xa6800-0xa6fff) for rid 0 of orm0 >> pcib0: allocated type 3 (0xa7000-0xa77ff) for rid 0 of orm0 >> pcib0: allocated type 3 (0xa7800-0xa7fff) for rid 0 of orm0 >> pcib0: allocated type 3 (0xa8000-0xa87ff) for rid 0 of orm0 >> pcib0: allocated type 3 (0xa8800-0xa8fff) for rid 0 of orm0 >> pcib0: allocated type 3 (0xa9000-0xa97ff) for rid 0 of orm0 >> pcib0: allocated type 3 (0xa9800-0xa9fff) for rid 0 of orm0 >> pcib0: allocated type 3 (0xaa000-0xaa7ff) for rid 0 of orm0 >> pcib0: allocated type 3 (0xaa800-0xaafff) for rid 0 of orm0 >> pcib0: allocated type 3 (0xab000-0xab7ff) for rid 0 of orm0 >> pcib0: allocated type 3 (0xab800-0xabfff) for rid 0 of orm0 >> pcib0: allocated type 3 (0xac000-0xac7ff) for rid 0 of orm0 >> pcib0: allocated type 3 (0xac800-0xacfff) for rid 0 of orm0 >> pcib0: allocated type 3 (0xad000-0xad7ff) for rid 0 of orm0 >> pcib0: allocated type 3 (0xad800-0xadfff) for rid 0 of orm0 >> pcib0: allocated type 3 (0xae000-0xae7ff) for rid 0 of orm0 >> pcib0: allocated type 3 (0xae800-0xaefff) for rid 0 of orm0 >> pcib0: allocated type 3 (0xaf000-0xaf7ff) for rid 0 of orm0 >> pcib0: allocated type 3 (0xaf800-0xaffff) for rid 0 of orm0 >> pcib0: allocated type 3 (0xb0000-0xb07ff) for rid 0 of orm0 >> pcib0: allocated type 3 (0xb0800-0xb0fff) for rid 0 of orm0 >> pcib0: allocated type 3 (0xb1000-0xb17ff) for rid 0 of orm0 >> pcib0: allocated type 3 (0xb1800-0xb1fff) for rid 0 of orm0 >> pcib0: allocated type 3 (0xb2000-0xb27ff) for rid 0 of orm0 >> pcib0: allocated type 3 (0xb2800-0xb2fff) for rid 0 of orm0 >> pcib0: allocated type 3 (0xb3000-0xb37ff) for rid 0 of orm0 >> pcib0: allocated type 3 (0xb3800-0xb3fff) for rid 0 of orm0 >> pcib0: allocated type 3 (0xb4000-0xb47ff) for rid 0 of orm0 >> pcib0: allocated type 3 (0xb4800-0xb4fff) for rid 0 of orm0 >> pcib0: allocated type 3 (0xb5000-0xb57ff) for rid 0 of orm0 >> pcib0: allocated type 3 (0xb5800-0xb5fff) for rid 0 of orm0 >> pcib0: allocated type 3 (0xb6000-0xb67ff) for rid 0 of orm0 >> pcib0: allocated type 3 (0xb6800-0xb6fff) for rid 0 of orm0 >> pcib0: allocated type 3 (0xb7000-0xb77ff) for rid 0 of orm0 >> pcib0: allocated type 3 (0xb7800-0xb7fff) for rid 0 of orm0 >> pcib0: allocated type 3 (0xb8000-0xb87ff) for rid 0 of orm0 >> pcib0: allocated type 3 (0xb8800-0xb8fff) for rid 0 of orm0 >> pcib0: allocated type 3 (0xb9000-0xb97ff) for rid 0 of orm0 >> pcib0: allocated type 3 (0xb9800-0xb9fff) for rid 0 of orm0 >> pcib0: allocated type 3 (0xba000-0xba7ff) for rid 0 of orm0 >> pcib0: allocated type 3 (0xba800-0xbafff) for rid 0 of orm0 >> pcib0: allocated type 3 (0xbb000-0xbb7ff) for rid 0 of orm0 >> pcib0: allocated type 3 (0xbb800-0xbbfff) for rid 0 of orm0 >> pcib0: allocated type 3 (0xbc000-0xbc7ff) for rid 0 of orm0 >> pcib0: allocated type 3 (0xbc800-0xbcfff) for rid 0 of orm0 >> pcib0: allocated type 3 (0xbd000-0xbd7ff) for rid 0 of orm0 >> pcib0: allocated type 3 (0xbd800-0xbdfff) for rid 0 of orm0 >> pcib0: allocated type 3 (0xbe000-0xbe7ff) for rid 0 of orm0 >> pcib0: allocated type 3 (0xbe800-0xbefff) for rid 0 of orm0 >> pcib0: allocated type 3 (0xbf000-0xbf7ff) for rid 0 of orm0 >> pcib0: allocated type 3 (0xbf800-0xbffff) for rid 0 of orm0 >> isa_probe_children: disabling PnP devices >> atkbdc: atkbdc0 already exists; skipping it >> atrtc: atrtc0 already exists; skipping it >> attimer: attimer0 already exists; skipping it >> sc: sc0 already exists; skipping it >> uart: uart0 already exists; skipping it >> isa_probe_children: probing non-PnP devices >> sc0: <System console> at flags 0x100 on isa0 >> sc0: VGA <16 virtual consoles, flags=0x300> >> sc0: fb0, kbd1, terminal emulator: scteken (teken terminal) >> vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 >> pcib0: allocated type 4 (0x3c0-0x3df) for rid 0 of vga0 >> pcib0: allocated type 3 (0xa0000-0xbffff) for rid 0 of vga0 >> pcib0: allocated type 4 (0x3f0-0x3f5) for rid 0 of fdc0 >> pcib0: allocated type 4 (0x3f7-0x3f7) for rid 1 of fdc0 >> fdc0 failed to probe at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0 >> ppc0: cannot reserve I/O port range >> ppc0: <Parallel port> failed to probe at irq 7 on isa0 >> pcib0: allocated type 4 (0x2f8-0x2ff) for rid 0 of uart1 >> uart1: <ns8250> failed to probe at port 0x2f8-0x2ff irq 3 on isa0 >> isa_probe_children: probing PnP devices >> powernow0: <PowerNow! K8> on cpu0 >> powernow1: <PowerNow! K8> on cpu1 >> Device configuration finished. >> procfs registered >> Timecounters tick every 1.000 msec >> vlan: initialized, using hash tables with chaining >> lo0: bpf attached >> hptrr: no controller detected. >> usbus0: 12Mbps Full Speed USB v1.0 >> usbus1: 12Mbps Full Speed USB v1.0 >> usbus2: 480Mbps High Speed USB v2.0 >> ata0: reset tp1 mask=03 ostat0=7f ostat1=7f >> ata0: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f >> ata0: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f >> ata0: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f >> ata0: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f >> ata0: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f >> ata0: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f >> ata0: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f >> ata0: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f >> ata0: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f >> ata0: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f >> ata0: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f >> ata0: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f >> ata0: stat1=0x7f err=0x7f lsb=0x7f msb=0x7f >> ata0: reset tp2 stat0=ff stat1=ff devices=0x0 >> ata1: reset tp1 mask=00 ostat0=ff ostat1=ff >> ugen0.1: <0x1166> at usbus0 >> uhub0: <0x1166 OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0 >> ugen1.1: <0x1166> at usbus1 >> uhub1: <0x1166 OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1 >> ugen2.1: <0x1166> at usbus2 >> uhub2: <0x1166 EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus2 >> pass0 at mpt0 bus 0 scbus2 target 17 lun 0 >> pass0: <HP DF0450B8054 HPD5> Fixed Direct Access SCSI-5 device >> pass0: Serial Number 3QQ254BL000090107KK2 >> pass0: 300.000MB/s transfers >> pass0: Command Queueing enabled >> pass1 at mpt0 bus 0 scbus2 target 18 lun 0 >> pass1: <HP DF0450B8054 HPD5> Fixed Direct Access SCSI-5 device >> pass1: Serial Number 3QQ25C8600009010SDER >> pass1: 300.000MB/s transfers >> pass1: Command Queueing enabled >> da0 at mpt0 bus 0 scbus2 target 17 lun 0 >> da0: <HP DF0450B8054 HPD5> Fixed Direct Access SCSI-5 device >> da0: Serial Number 3QQ254BL000090107KK2 >> da0: 300.000MB/s transfers >> da0: Command Queueing enabled >> da0: 429247MB (879097968 512 byte sectors: 255H 63S/T 54721C) >> da1 at mpt0 bus 0 scbus2 target 18 lun 0 >> da1: <HP DF0450B8054 HPD5> Fixed Direct Access SCSI-5 device >> da1: Serial Number 3QQ25C8600009010SDER >> da1: 300.000MB/s transfers >> da1: Command Queueing enabled >> da1: 429247MB (879097968 512 byte sectors: 255H 63S/T 54721C) >> SMP: AP CPU #1 Launched! >> cpu1 AP: >> ID: 0x01000000 VER: 0x80050010 LDR: 0x00000000 DFR: 0xffffffff >> lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff >> timer: 0x000100ef therm: 0x00010000 err: 0x000000f0 pmc: 0x00010400 >> TSC timecounter discards lower 8 bit(s) >> GEOM: new disk da0 >> Timecounter "TSC-low" frequency 9351792 Hz quality -100 >> GEOM: new disk da1 >> Root mount waiting for: usbus2 usbus1 usbus0 >> _______________________________________________ >> freebsd-stable@freebsd.org mailing list >> http://lists.freebsd.org/mailman/listinfo/freebsd-stable >> To unsubscribe, send any mail to "freebsd-stable-unsubscr...@freebsd.org" > > -- "I'm tryin' to think but nothin happens" - Curly _______________________________________________ freebsd-stable@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-stable To unsubscribe, send any mail to "freebsd-stable-unsubscr...@freebsd.org"
