On Sun, 11 Mar 2012 19:54:57 +0100 Phil Regnauld wrote:
PR> Hi,
PR> I've got a fairly simple setup: two hosts running 9.0-R (will upgrade to
stable
PR> if told to, but want to check here first), ZFS and HAST. HAST is
configured to
PR> run on top of zvols configured on each host, as illustrated:
PR> FS FS
PR> +------+ +------+
PR> | hvol | <---- hastd -----> | hvol |
PR> +------+ +------+
PR> | zvol | | zvol |
PR> +------+ +------+
PR> | zfs | | zfs |
PR> +------+ +------+
PR> h1 h2
PR> Connection is gigabit to the same switch. No issues with large TCP
PR> transfers such as SCP/FTP.
PR> Config is vanilla:
PR> # zfs create -V 10G zfs/hvol
PR> hast.conf:
PR> resource hvol {
PR> on h1 {
PR> local /dev/zvol/zfs/hvol
PR> remote tcp4://192.168.1.100
PR> }
PR> on h2 {
PR> local /dev/zvol/zfs/hvol
PR> remote tcp4://192.168.1.200
PR> }
PR> }
PR> h1 is behaving fine as primary, either with h2 turned off or in init -
PR> but as soon as I set the role to secondary for h2, the receiver
PR> repeatedly crashes and restarts - see the traces below.
PR> Primary:
PR> Mar 11 02:02:30 h1 hastd[2282]: [hvol] (primary) Disconnected from
tcp4://192.168.1.200.
PR> Mar 11 02:02:30 h1 hastd[2282]: [hvol] (primary) Unable to write
synchronization data: Cannot allocate memory.
PR> Mar 11 02:02:41 h1 hastd[2282]: [hvol] (primary) Unable to send request
(Cannot allocate memory): WRITE(31642091520, 131072).
31642091520 looks like rather large offset for 10Gb volume...
Just to be more confident that this is a HAST issue could you please try the
following experiment?
1) Stop hastd on h2.
2) On h1 run something like below:
dd if=/dev/zvol/zfs/hvol bs=131072 | ssh h2 dd bs=131072 of=/dev/zvol/zfs/hvol
(copy hvol from h1 to h2 without hastd to see if it will succeed).
Note: you will need to recreate HAST provider on secondary after this.
--
Mikolaj Golub
_______________________________________________
freebsd-stable@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-stable
To unsubscribe, send any mail to "freebsd-stable-unsubscr...@freebsd.org"
