On Friday, March 30, 2012 4:03:54 pm Sean Bruno wrote:
> On Fri, 2012-03-30 at 09:29 -0700, John Baldwin wrote:
> > On Thursday, March 29, 2012 12:48:39 pm Sean Bruno wrote:
> > > Noting a failure to attach to the onboard IPMI controller with this dell
> > > R815. Not sure what to start poking at and thought I'd though this over
> > > here for comment.
> > >
> > > -bash-4.2$ dmesg |grep ipmi
> > > ipmi0: KCS mode found at io 0xca8 on acpi
> > > ipmi1: <IPMI System Interface> on isa0
> > > device_attach: ipmi1 attach returned 16
> > > ipmi1: <IPMI System Interface> on isa0
> > > device_attach: ipmi1 attach returned 16
> > > ipmi0: Timed out waiting for GET_DEVICE_ID
> > >
> > >
> > > -bash-4.2$ sysctl -a|grep ipmi
> > > device ipmi # IPMI
> > > hw.ipmi.on: 1
> > > dev.ipmi.0.%desc: IPMI System Interface
> > > dev.ipmi.0.%driver: ipmi
> > > dev.ipmi.0.%location: handle=\_SB_.PCI0.ISA_.NIPM
> > > dev.ipmi.0.%pnpinfo: _HID=IPI0001 _UID=5
> > > dev.ipmi.0.%parent: acpi0
> >
> > Can you get dmidecode output?
> >
>
>
> http://people.freebsd.org/~sbruno/dmidecode_r815.txt
This is the relevant bits:
Handle 0x2600, DMI type 38, 18 bytes
IPMI Device Information
Interface Type: KCS (Keyboard Control Style)
Specification Version: 2.0
I2C Slave Address: 0x10
NV Storage Device: Not Present
Base Address: 0x0000000000000CA8 (I/O)
Register Spacing: 32-bit Boundaries
Note the '32-bit' boundaries. I think ACPI doesn't support that for its
attachment (well, it does if they specify each port as a separate thing in
_CRS). Can you get acpidump -d output?
--
John Baldwin
_______________________________________________
freebsd-stable@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-stable
To unsubscribe, send any mail to "freebsd-stable-unsubscr...@freebsd.org"
