---------- 已转发邮件 ---------- 发件人： Fred Liu <fred.f...@gmail.com> 日期： 2012年4月9日 下午3:56 主题： Re: SAS Drive identification LEDs 收件人： Mike Pumford <mpumf...@mpcdata.com>
Thanks. Can you recommend what drive and enclosure can provide working SES in 9.0? Thanks. Fred 在 2012年3月30日 下午5:18，Mike Pumford <mpumf...@mpcdata.com> 写道： > Fred Liu wrote: >>> >>> >>> How would you identify such a drive on any other system? >>> >> >> Normally, there are printed labels as the backup solution. >> > You can identify SAS drives in an enclosure if the drive and enclosure > provide the information needed. > > If you issue an INQUIRY EVPD read of page 0x83 on the drive it should give > you the WWN and target SAS addresses of the drive. You should then be able > to tie this up with the array element in the enclosure by matching it up > with data in the SES diagnostic page 0xA from the enclosure. > > sg3_utils provides command line tools that can perform these queries. > > Mike > -- > Mike Pumford, Senior Software Engineer > MPC Data Limited > e-mail: mpumf...@mpcdata.com web: www.mpcdata.com > tel: +44 (0) 1225 710600 fax: +44 (0) 1225 710601 > ddi: +44 (0) 1225 710635 > > > _______________________________________________ > freebsd-stable@freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-stable > To unsubscribe, send any mail to "freebsd-stable-unsubscr...@freebsd.org" _______________________________________________ freebsd-stable@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-stable To unsubscribe, send any mail to "freebsd-stable-unsubscr...@freebsd.org"
