On Wed, Jan 02, 2013 at 08:33:41AM +0200, Daniel Braniss wrote: > Hi, > the last batch of changes to bge caused the ipmi to stop working on a > Sun Fire X2200 M2, and > bge0: <Broadcom NetXtreme Gigabit Ethernet Controller, ASIC rev. 0x009003> > mem > 0xfdff0000-0xfdffffff,0xfdfe0000-0xfdfeffff irq 17 at device 4.0 on pci6 > bge0: CHIP ID 0x00009003; ASIC REV 0x09; CHIP REV 0x90; PCI-X 133 MHz > miibus2: <MII bus> on bge0 > > bge1: <Broadcom NetXtreme Gigabit Ethernet Controller, ASIC rev. 0x009003> > mem > 0xfdfc0000-0xfdfcffff,0xfdfb0000-0xfdfbffff irq 18 at device 4.1 on pci6 > bge1: CHIP ID 0x00009003; ASIC REV 0x09; CHIP REV 0x90; PCI-X 133 MHz > miibus3: <MII bus> on bge1 >
Could you narrow down which revision broke IPMI? And what problems are you seeing? I don't have IPMI-capable controller to test. IPMI support for old controllers(pre-5717 controllers) was not complete and it was luck if it worked on a couple of controllers. _______________________________________________ freebsd-stable@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-stable To unsubscribe, send any mail to "freebsd-stable-unsubscr...@freebsd.org"