Hello.
I have a problem with all diks that are a part of ZFS pools.
There is a busy state (6-7%) on all of them in the iostat. But only
there! There aren't any load at all on the disks and other system
utilities, such as gstat, 'zpool iostat', 'systat -iostat' which are
reporting a zero busy status.
24 disks -> 8 ZFS pools
All 24 disks are on the 3Ware controller in JBOD mode (each disk works
as a single disk without any hardware RAIDs)
twa0: <3ware 9000 series Storage Controller> port 0xd800-0xd8ff mem
0xf6000000-0xf7ffffff,0xfaedf000-0xfaedffff irq 16 at device 0.0 on pci2
twa0: INFO: (0x15: 0x1300): Controller details:: Model 9650SE-24M8, 24
ports, Firmware FE9X 4.08.00.006, BIOS BE9X 4.08.00.001
# uname -a
FreeBSD gfs521 9.1-STABLE FreeBSD 9.1-STABLE #5 r245163:
# iostat -xzt da,scsi
extended device statistics
device r/s w/s kr/s kw/s qlen svc_t %b
da0 12.6 2.5 1248.5 173.2 0 29.0 7
da1 12.6 2.6 1227.7 173.2 0 22.6 6
da2 12.5 2.5 1233.3 173.2 0 29.3 7
da3 10.2 2.4 994.7 165.5 0 28.1 6
da4 10.5 2.4 1035.5 165.5 0 28.0 6
da5 10.7 2.4 1049.8 165.5 0 28.6 6
da6 14.6 2.5 1418.9 165.2 0 28.4 8
da7 14.4 2.5 1387.2 165.2 0 28.6 8
da8 14.3 2.5 1376.7 165.2 0 27.8 8
da9 10.8 2.5 1065.2 161.7 0 27.0 6
da10 11.0 2.5 1100.9 161.7 0 27.5 6
da11 10.4 2.5 1015.1 161.7 0 27.6 6
da12 13.5 2.4 1365.8 168.7 0 28.9 7
da13 13.9 2.4 1364.2 168.7 0 26.9 7
da14 13.9 2.4 1373.9 168.7 0 27.1 7
da15 13.6 2.6 1308.5 165.3 0 24.5 7
da16 14.3 2.5 1417.0 165.3 0 24.9 7
da17 14.0 2.5 1376.6 165.3 0 25.1 7
da18 17.0 2.4 1697.2 164.4 0 19.8 6
da19 16.0 2.4 1578.0 164.4 0 20.2 6
da20 16.5 2.4 1635.6 164.4 0 23.5 7
da21 8.7 2.5 802.8 186.3 0 27.2 6
da22 8.7 2.5 800.1 186.3 0 26.9 6
da23 8.6 2.5 797.0 186.3 0 27.1 6
# gstat
0 0 0 0 0.0 0 0 0.0 0.0| da0
0 0 0 0 0.0 0 0 0.0 0.0| da1
0 0 0 0 0.0 0 0 0.0 0.0| da2
0 0 0 0 0.0 0 0 0.0 0.0| da3
0 0 0 0 0.0 0 0 0.0 0.0| da4
0 0 0 0 0.0 0 0 0.0 0.0| da5
0 0 0 0 0.0 0 0 0.0 0.0| da6
0 0 0 0 0.0 0 0 0.0 0.0| da7
0 0 0 0 0.0 0 0 0.0 0.0| da8
0 0 0 0 0.0 0 0 0.0 0.0| da9
0 0 0 0 0.0 0 0 0.0 0.0| da10
0 0 0 0 0.0 0 0 0.0 0.0| da11
0 0 0 0 0.0 0 0 0.0 0.0| da12
0 0 0 0 0.0 0 0 0.0 0.0| da13
0 0 0 0 0.0 0 0 0.0 0.0| da14
0 0 0 0 0.0 0 0 0.0 0.0| da15
0 0 0 0 0.0 0 0 0.0 0.0| da16
0 0 0 0 0.0 0 0 0.0 0.0| da17
0 0 0 0 0.0 0 0 0.0 0.0| da18
0 0 0 0 0.0 0 0 0.0 0.0| da19
0 0 0 0 0.0 0 0 0.0 0.0| da20
0 0 0 0 0.0 0 0 0.0 0.0| da21
0 0 0 0 0.0 0 0 0.0 0.0| da22
0 0 0 0 0.0 0 0 0.0 0.0| da23
# zpool iostat
capacity operations bandwidth
pool alloc free read write read write
---------- ----- ----- ----- ----- ----- -----
data1 11.4G 5.43T 0 0 0 0
data2 9.05G 5.43T 0 0 0 0
data3 10.1G 5.43T 0 0 0 0
data4 4.15G 5.43T 0 0 0 0
data5 11.9G 5.43T 0 0 0 0
data6 10.1G 5.43T 0 0 0 0
data7 76.1G 5.36T 0 0 0 0
data8 5.38M 5.44T 0 0 0 0
# zpool status -xv
all pools are healthy
Thanks for any ideas!
_______________________________________________
freebsd-stable@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-stable
To unsubscribe, send any mail to "freebsd-stable-unsubscr...@freebsd.org"
