On Thu, Sep 26, 2013 at 08:09:36AM +0000, Thomas Mueller wrote: > I rebuilt the kernel while keeping the existing kernel, installing to > /boot/kernelre on the USB stick. > > Unfortunately all the modules were redundantly rebuilt. Maybe I should have > had "-D NO_MODULES" instead of "-DNO_MODULES"? > > I typed "unload" at the loader prompt, then "boot /boot/kernelre/kernel". > > I had the same problem as before with dhclient, looked like nothing different.
The patch was not intended to address your issue. It was for getting correct MAC revision number. So seeing no behavioral change is normal. The MAC revision number now indicates 0x00100000 which means you have slightly different variant. I'll let you know if I happen to find more clue on that MAC revision. > > Lines in /var/run/dmesg.boot relating to re0 were: > > re0: <RealTek 8168/8111 B/C/CP/D/DP/E/F PCIe Gigabit Ethernet> port > 0xe000-0xe0ff mem 0xf7d04000-0xf7d04fff,0xf7d00000-0xf7d03fff irq 17 at > device 0.0 on pci2 > re0: Using 1 MSI-X message > re0: Chip rev. 0x2c800000 > re0: MAC rev. 0x00100000 ^^^^^^^^^^^^^^^^^^^^^^^^ > miibus0: <MII bus> on re0 > rgephy0: <RTL8169S/8110S/8211 1000BASE-T media interface> PHY 1 on miibus0 > rgephy0: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, > 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT, 1000baseT-master, > 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, > 1000baseT-FDX-flow-master, auto, auto-flow > re0: Ethernet address: d4:3d:7e:97:17:e2 > > > Tom > _______________________________________________ freebsd-stable@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-stable To unsubscribe, send any mail to "freebsd-stable-unsubscr...@freebsd.org"
