On Fri, Oct 04, 2013 at 03:53:10PM +1000, Jan Mikkelsen wrote: > >> We have Drake Skinny (9240-4i and 9240-8i) cards running, most recently > >> with 9.2-RC4. We'll be testing 9.2-RELEASE in the next week or two. > >> > >> We have seen problems with older versions of the firmware, and > >> interactions with some Supermicro BIOS versions. All these problems have > >> been resolved by upgrading to the latest versions of the controller > >> firmware and system BIOSes. > >> > >> We're running with with hw.mfi.msi=1. I haven't tested without that since > >> early 2011; I should probably try it out. > >> > >> So: What firmware do you have in the controller? Did you update it? > > > > Yes, I reflashed one board to the latest blob I was able to find at that > > time. For the second board, I did not bothered. The info I am able to > > find right now in my outcoming mbox, is > > > > (this is for four-ports, was flashed, I believe) > > mfi0: 916 (boot + 3s/0x0020/info) - Firmware version 2.130.374-2023 > > > > mfi0: 917 (boot + 6s/0x0020/info) - Package version 20.10.1-0126 > > > > mfi0: 918 (boot + 6s/0x0020/info) - Board Revision 03A > > > > (and this is for eight-ports) > > mfi0: 326 (boot + 4s/0x0020/info) - Firmware version 2.130.314-1585 > > > > mfi0: 327 (boot + 5s/0x0020/info) - Package version 20.10.1-0101 > > > > mfi0: 328 (boot + 5s/0x0020/info) - Board Revision 03B > > > > I am pretty much sure that the issue is either in the m/b compatibility > > or mfi(4) driver. > > OK. I haven't seen timeout errors like that for a long time, so you could be > right. I don't know. > > This is from a running 9.2-RC4 system: > > mfi1: <Drake Skinny> port 0xc000-0xc0ff mem > 0xfad9c000-0xfad9ffff,0xfadc0000-0xfadfffff irq 30 at device 0.0 on pci2 > mfi1: Using MSI > mfi1: Megaraid SAS driver Ver 4.23 > ... > mfi1: 15228 (boot + 3s/0x0020/info) - Firmware version 2.130.384-2291 > mfi1: 15229 (boot + 5s/0x0020/info) - Package version 20.11.1-0137 > mfi1: 15230 (boot + 5s/0x0020/info) - Board Revision 03A
Could you provide me the output of the kenv(8) ? I am interested in the smbios mibs, i.e. your hardware identification.
pgpUnRmhdwROq.pgp
Description: PGP signature
