On Wed, Aug 19, 2015 at 09:00:35AM -0400, Rick Macklem wrote: > Hans Petter Selasky wrote: > > On 08/19/15 09:42, Yonghyeon PYUN wrote: > > > On Wed, Aug 19, 2015 at 09:00:52AM +0200, Hans Petter Selasky wrote: > > >> On 08/18/15 23:54, Rick Macklem wrote: > > >>> Ouch! Yes, I now see that the code that counts the # of mbufs is before > > >>> the > > >>> code that adds the tcp/ip header mbuf. > > >>> > > >>> In my opinion, this should be fixed by setting if_hw_tsomaxsegcount to > > >>> whatever > > >>> the driver provides - 1. It is not the driver's responsibility to know > > >>> if > > >>> a tcp/ip > > >>> header mbuf will be added and is a lot less confusing that expecting the > > >>> driver > > >>> author to know to subtract one. (I had mistakenly thought that > > >>> tcp_output() had > > >>> added the tc/ip header mbuf before the loop that counts mbufs in the > > >>> list. > > >>> Btw, > > >>> this tcp/ip header mbuf also has leading space for the MAC layer > > >>> header.) > > >>> > > >> > > >> Hi Rick, > > >> > > >> Your question is good. With the Mellanox hardware we have separate > > >> so-called inline data space for the TCP/IP headers, so if the TCP stack > > >> subtracts something, then we would need to add something to the limit, > > >> because then the scatter gather list is only used for the data part. > > >> > > > > > > I think all drivers in tree don't subtract 1 for > > > if_hw_tsomaxsegcount. Probably touching Mellanox driver would be > > > simpler than fixing all other drivers in tree. > > > > > >> Maybe it can be controlled by some kind of flag, if all the three TSO > > >> limits should include the TCP/IP/ethernet headers too. I'm pretty sure > > >> we want both versions. > > >> > > > > > > Hmm, I'm afraid it's already complex. Drivers have to tell almost > > > the same information to both bus_dma(9) and network stack. > > > > Don't forget that not all drivers in the tree set the TSO limits before > > if_attach(), so possibly the subtraction of one TSO fragment needs to go > > into ip_output() .... > > > Ok, I realized that some drivers may not know the answers before > ether_ifattach(), > due to the way they are configured/written (I saw the use of > if_hw_tsomax_update() > in the patch).
I was not able to find an interface that configures TSO parameters after if_t conversion. I'm under the impression if_hw_tsomax_update() is not designed to use this way. Probably we need a better one?(CCed to Gleb). > > If it is subtracted as a part of the assignment to if_hw_tsomaxsegcount in > tcp_output() > at line#791 in tcp_output() like the following, I don't think it should > matter if the > values are set before ether_ifattach()? > /* > * Subtract 1 for the tcp/ip header mbuf that > * will be prepended to the mbuf chain in this > * function in the code below this block. > */ > if_hw_tsomaxsegcount = tp->t_tsomaxsegcount - 1; > > I don't have a good solution for the case where a driver doesn't plan on > using the > tcp/ip header provided by tcp_output() except to say the driver can add one > to the > setting to compensate for that (and if they fail to do so, it still works, > although > somewhat suboptimally). When I now read the comment in sys/net/if_var.h it is > clear > what it means, but for some reason I didn't read it that way before? (I think > it was > the part that said the driver didn't have to subtract for the headers that > confused me?) > In any case, we need to try and come up with a clear definition of what they > need to > be set to. > > I can now think of two ways to deal with this: > 1 - Leave tcp_output() as is, but provide a macro for the device driver > authors to use > that sets if_hw_tsomaxsegcount with a flag for "driver uses tcp/ip header > mbuf", > documenting that this flag should normally be true. > OR > 2 - Change tcp_output() as above, noting that this is a workaround for > confusion w.r.t. > whether or not if_hw_tsomaxsegcount should include the tcp/ip header mbuf > and > update the comment in if_var.h to reflect this. Then drivers that don't > use the > tcp/ip header mbuf can increase their value for if_hw_tsomaxsegcount by 1. > (The comment should also mention that a value of 35 or greater is much > preferred to > 32 if the hardware will support that.) > Both works for me. My preference is 2 just because it's very common for most drivers that use tcp/ip header mbuf. _______________________________________________ freebsd-stable@freebsd.org mailing list https://lists.freebsd.org/mailman/listinfo/freebsd-stable To unsubscribe, send any mail to "freebsd-stable-unsubscr...@freebsd.org"