I can defenetly say that this thing is missing with a new kernel in boot log:
atapci0: AHCI called from vendor specific driver atapci0: AHCI v1.00 controller with 2 3Gbps ports, PM supported 2015-09-21 15:00 GMT+03:00 <freebsd-stable-requ...@freebsd.org>: > Send freebsd-stable mailing list submissions to > freebsd-stable@freebsd.org > > To subscribe or unsubscribe via the World Wide Web, visit > https://lists.freebsd.org/mailman/listinfo/freebsd-stable > or, via email, send a message with subject or body 'help' to > freebsd-stable-requ...@freebsd.org > > You can reach the person managing the list at > freebsd-stable-ow...@freebsd.org > > When replying, please edit your Subject line so it is more specific > than "Re: Contents of freebsd-stable digest..." > > > Today's Topics: > > 1. Re: fat32 question (Julian H. Stacey) > 2. Re: fat32 question (Zoran Kolic) > 3. ZFS UEFI boot? (Rainer Duffner) > 4. Re: fat32 question (Erich Dollansky) > 5. FreeBSD 10.2 Stable JMicron RIAD update problem > (Michael BlackHeart) > > > ---------------------------------------------------------------------- > > Message: 1 > Date: Sun, 20 Sep 2015 14:12:31 +0200 > From: "Julian H. Stacey" <j...@berklix.com> > To: Zoran Kolic <zko...@sbb.rs> > Cc: freebsd-stable@freebsd.org > Subject: Re: fat32 question > Message-ID: <201509201212.t8kccvw7068...@fire.js.berklix.net> > > Tomoaki AOKI wrote: > > According to "Real Hardware Gotchas" section in [1], FAT32 fs creation > > of FreeBSD seems to have some problems. > > > > Try formatting by the hardware you're going to transfer files from > > FreeBSD, if available. Once formatted by other OS, read/write/delete > > files in FAT32 formatted media would be OK with FreeBSD. > > > > If not, and if the file you want to transfer is small enough, partition > > the media and use FAT16. (The safest maximum is 32MB, but maybe under > > 2GB would be OK.) > > > > [1] https://wiki.freebsd.org/UEFI > > Zoran, re Brandon's "won't understand it any more." > Dont despair & discard stick, you can rebuild the MBR: man fdisk > from memory start with fdisk -i -B /dev/da0 > > sometimes I then remove & reinsert or even reboot, to make certain > the OS has the new numbers. I don't recall I've needed to reduce > from FAT32 to FAT16. > > Ive not read the uefi page as happily no boxes are uefi here, > but I've often created FAT32 partitions, my notes at > > http://www.berklix.com/~jhs/src/bsd/fixes/FreeBSD/src/jhs/etc/devd/berklix.conf > > The advice about letting the other native MS FAT device format if it will, > is quickest solution though. > > PS Max size of FAT32 = 2TB > https://en.wikipedia.org/wiki/File_Allocation_Table#FAT32 > > > > > > > On Sun, 20 Sep 2015 06:55:19 +0200 > > Zoran Kolic <zko...@sbb.rs> wrote: > > > > > I have a device to which I'd like to connect otg cable > > > and insert 16gb usb stick. Tried "newfs_msdos -F32 /dev/da0". > > > Mounted, copied files. The device does not see the file > > > system at all. > > > Any idea what to do further? Another option might be extfs. > > > Best regards > > > > > > Zoran > > > > > Cheers, > Julian > -- > Julian Stacey, BSD Linux Unix C Sys Eng Consultant Munich > http://berklix.com > Reply after previous text, like a play - Not before, which looses context. > Indent previous text with "> " Insert new lines before 80 chars. > Send plain text, Not quoted-printable, Not HTML, Not ms.doc, Not base64. > > > ------------------------------ > > Message: 2 > Date: Sun, 20 Sep 2015 16:23:42 +0200 > From: Zoran Kolic <zko...@sbb.rs> > To: "Julian H. Stacey" <j...@berklix.com> > Cc: allber...@gmail.com, bruc...@austin.rr.com, > freebsd-stable@freebsd.org > Subject: Re: fat32 question > Message-ID: <20150920142342.ga...@faust.sbb.rs> > Content-Type: text/plain; charset=us-ascii > > > Zoran, re Brandon's "won't understand it any more." > > Dont despair & discard stick, you can rebuild the MBR: man fdisk > > from memory start with fdisk -i -B /dev/da0 > > First, thanks all for replies! > After a bit of puzzling, I found that the problem was every Transcend > usb stick I have. They are all fine for mundane tasks and newfs_msdos > makes it able to work on freebsd. My music player was picky and has > something to say against. When I inserted old and forgoten Verbatim > drive, without making f32, it presented itself and files were ready > to play. Unbelievable. > Yep, I did fdisk step after I posted the question. No go on Transcend. > Might be hardware incompatibility or else. Btw, I always do just newfs > on back up usb disks and never had any problem, so far, on freebsd. > Once again, thank you for help. > > Zoran > > > > ------------------------------ > > Message: 3 > Date: Sun, 20 Sep 2015 18:57:42 +0200 > From: Rainer Duffner <rai...@ultra-secure.de> > To: freebsd-stable <freebsd-stable@freebsd.org> > Subject: ZFS UEFI boot? > Message-ID: <4b45b989-c3ff-4c60-a648-38603f0e6...@ultra-secure.de> > Content-Type: text/plain; charset=utf-8 > > Hi, > > according to the wiki: > > https://wiki.freebsd.org/UEFI#Tasks <https://wiki.freebsd.org/UEFI#Tasks> > > it?s still unsolved and hasn?t even been started. > > > According to the status report: > > > https://www.freebsd.org/news/status/report-2015-04-2015-06.html#ZFS-Support-for-UEFI-Boot/Loader > < > https://www.freebsd.org/news/status/report-2015-04-2015-06.html#ZFS-Support-for-UEFI-Boot/Loader > > > > some work has been done. > > https://lists.freebsd.org/pipermail/freebsd-hackers/2015-March/047486.html > < > https://lists.freebsd.org/pipermail/freebsd-hackers/2015-March/047486.html > > > > > The reason I?m asking is that all of our servers are HP DL 3[6|8]0 Gen9. > These servers only support UEFI boot (you can set them to legacy-boot only > for the next reboot). > I would assume this to be true for more and more servers. > > I was playing with the idea of replacing the P440 controllers that we > normally buy for these servers with the H240 controllers (these can be put > into a so called ?HBA mode? and then present each disk directly, making > them better suited for ZFS). > > However, the server still only boots with UEFI. > > And ZFS I want primarily to leverage beadm across all our servers... > > > > > > > > > > ------------------------------ > > Message: 4 > Date: Mon, 21 Sep 2015 07:51:54 +0800 > From: Erich Dollansky <erichsfreebsdl...@alogt.com> > To: Zoran Kolic <zko...@sbb.rs> > Cc: "Julian H. Stacey" <j...@berklix.com>, bruc...@austin.rr.com, > freebsd-stable@freebsd.org, allber...@gmail.com > Subject: Re: fat32 question > Message-ID: <20150921075154.4c5a0...@x220.alogt.com> > Content-Type: text/plain; charset=US-ASCII > > Hi, > > On Sun, 20 Sep 2015 16:23:42 +0200 > Zoran Kolic <zko...@sbb.rs> wrote: > > > > Zoran, re Brandon's "won't understand it any more." > > > Dont despair & discard stick, you can rebuild the MBR: man fdisk > > > from memory start with fdisk -i -B /dev/da0 > > > > First, thanks all for replies! > > After a bit of puzzling, I found that the problem was every Transcend > > usb stick I have. They are all fine for mundane tasks and newfs_msdos > > makes it able to work on freebsd. My music player was picky and has > > something to say against. When I inserted old and forgoten Verbatim > > drive, without making f32, it presented itself and files were ready > > to play. Unbelievable. > > Yep, I did fdisk step after I posted the question. No go on Transcend. > > Might be hardware incompatibility or else. Btw, I always do just newfs > > on back up usb disks and never had any problem, so far, on freebsd. > > Once again, thank you for help. > > > FreeBSD has no problem when the file system is directly on the device. > Other operating system have problems with it as they expect partitions. > > fdisk is a bit outdated. Use gpart for partitioning. > > Erich > > > ------------------------------ > > Message: 5 > Date: Mon, 21 Sep 2015 12:08:50 +0300 > From: Michael BlackHeart <amdm...@gmail.com> > To: freebsd-stable <freebsd-stable@freebsd.org> > Subject: FreeBSD 10.2 Stable JMicron RIAD update problem > Message-ID: > < > ca+az77ochmpo9u4jyu1+empae03kkfuxjf8mzygrohnhvhf...@mail.gmail.com> > Content-Type: text/plain; charset=UTF-8 > > Hello there. > I've just tried to update from FreeBSD 10.2-PRERELEASE #0 r285303: to > > URL: svn://svn.freebsd.org/base/stable/10 > Relative URL: ^/stable/10 > Repository Root: svn://svn.freebsd.org/base > Repository UUID: ccf9f872-aa2e-dd11-9fc8-001c23d0bc1f > Revision: 287988 > > And everything goes wrong. GEOM RAID didn't start at boot time. It has to > be connected with recent ata and achi driver workaround but I didn't get > how to get it back working. > > Box configuration and setup. > > 6 HDD on intel ACHI-mode ICH10R - they're irrelevant. > > 2HDD (SATA interface) on JMicron JMB363 RAID enabled controller. This > controller has 2 SATA ports and 2 IDE ports(Or it's 2 controllers with > common interface) and works in RAID mode. It seems that previously it > worked with atajmicron kernel module. There was a GEOM RAID control to > handle hardware RAID and this 2 HDD holds on an entire system in UFS booted > by label. > > Here's kernel configuration and boot log from working set. > > diablo.miekoff.local#/var/log/>kldstat -vvv > Id Refs Address Size Name > 1 10 0xffffffff80200000 eab5c0 kernel (/boot/kernel/kernel) > Contains modules: > Id Name > 278 newreno > 228 if_lo > 266 ng_socket > 283 pfsync > 208 shell > 207 elf32 > 206 elf64 > 177 pseudofs > 222 bridgestp > 230 if_tun > 223 if_bridge > 227 if_gre > 225 if_faith > 281 mld > 226 if_gif > 276 igmp > 280 ip6_mroute > 288 cryptodev > 282 pflog > 231 if_vlan > 269 ng_tcpmss > 268 ng_tag > 255 ng_iface > 267 ng_sppp > 245 ng_bpf > 254 ng_gif_demux > 242 ng_netflow > 265 ng_rfc1490 > 277 ip_mroute > 264 ng_pptpgre > 263 ng_pppoe > 253 ng_gif > 262 ng_ppp > 252 ng_framerelay > 261 ng_pipe > 251 ng_ether > 250 ng_eiface > 260 ng_one2many > 259 ng_mppc > 249 ng_echo > 248 ng_device > 247 ng_deflate > 258 ng_lmi > 257 ng_l2tp > 246 ng_bridge > 256 ng_ksocket > 243 ng_UI > 272 ng_vlan > 271 ng_vjc > 270 ng_tee > 284 pf > 214 sysvmsg > 215 sysvsem > 216 sysvshm > 171 nfscommon > 217 aio > 287 nfslockd > 174 nfsd > 290 krpc > 286 nfssvc > 179 udf > 175 nullfs > 204 cd9660 > 170 msdosfs > 291 ufs > 180 tmpfs > 172 nfs > 167 devfs > 168 fdescfs > 176 procfs > 173 nfscl > 211 acl_posix1e > 210 acl_nfs4 > 15 ctltpc > 12 ctlcfcs > 14 ctlcfiscsi > 11 cbr > 13 ctlcfi > 16 ctlfe > 10 cbb > 9 ctl > 2 cam > 45 ata > 205 cd9660_iconv > 20 enc > 7 ch > 19 sa > 4 pmp > 221 iconv_xlat16 > 220 iconv_xlat > 219 iconv_ucs > 5 probe > 18 pass > 178 udf_iconv > 189 g_part_mbr > 188 g_part_gpt > 187 g_part_ebr > 186 g_part_bsd > 8 ada > 17 da > 1 xpt > 229 sppp > 3 aprobe > 6 cd > 169 msdosfs_iconv > 76 drmn/fbd > 75 fb/fbd > 74 cpu/ichss > 148 pci/uhci > 39 cpu/acpi_throttle > 25 acpi/acpi_cmbat > 341 isa/sysresource > 340 nexus/ram > 339 root/nexus > 147 pci/ohci > 38 acpi/acpi_tz > 146 pci/ehci > 37 acpi/acpi_smbat > 30 acpi/acpi_lid > 36 acpi/acpi_sysresource > 23 acpi/acpi_acad > 29 acpi/acpi_isab > 73 pci/ath_pci > 72 pci/ata_via > 338 legacy/cpu > 337 nexus/legacy > 145 puc/uart > 336 nexus/apic > 335 pci/ioapic > 144 pci/uart > 143 isa/uart > 142 acpi/uart > 334 qpi/pcib > 333 nexus/qpi > 71 pci/ata_sis > 332 isa/pcibus_pnp > 331 legacy/pcib > 70 pci/ata_sii > 330 isa/orm > 329 acpi/atdma > 328 isa/atdma > 141 pci/sdhci_pci > 327 legacy/isa > 326 acpi/attimer > 325 isa/attimer > 69 pci/ata_serverworks > 324 acpi/atrtc > 323 isa/atrtc > 68 pci/ata_promise > 140 re/miibus > 139 pci/re > 322 acpi/dmar > 67 pci/ata_nvidia > 28 acpi/hpet > 321 cpu/p4tcc > 320 cpu/hwpstate > 66 pci/ata_netcell > 319 cpu/est > 65 pci/ata_national > 64 pci/ata_micron > 318 cpu/powernow > 317 nexus/smbios > 63 pci/ata_marvell > 137 random > 62 pci/ata_jmicron > 61 pci/ata_ite > 60 pci/ata_intel > 59 pci/ata_highpoint > 135 pci/puc > 58 pci/ata_cyrix > 134 puc/ppc > 133 pci/ppc > 132 isa/ppc > 131 acpi/ppc > 130 ppbus/ppi > 129 ppc/ppbus > 57 pci/ata_cypress > 315 vgapci/vgapm > 314 isa/vga > 313 isa/sc > 312 scrndr-vga > 311 scterm-scteken > 128 ppbus/lpt > 127 pci/vgapci > 308 io > 307 isa/ichwd > 306 vesa > 56 pci/ata_cenatek > 55 pci/ata_ati > 305 cpuctl > 304 cpu/coretemp > 303 acpi/psmcpnp > 302 isa/psmcpnp > 301 atkbdc/psm > 126 pci/pcib > 26 acpi/cpu > 54 pci/ata_amd > 300 acpi/atkbdc > 299 isa/atkbdc > 298 atkbdc/atkbd > 297 hostb/agp_via > 296 vgapci/agp_i810 > 295 hostb/agp_amd64 > 53 pci/ata_adaptec > 52 pci/ata_ali > 51 pci/ata_acard > 50 atapci/ata_ahci_ata > 49 pci/ata_ahci > 209 cpu/cpufreq > 48 atapci/ata > 47 pci/atapci > 35 cpu/acpi_perf > 275 accf_http > 294 acpi/fpupnp > 274 accf_dns > 273 accf_data > 293 root/nexus_acpi > 46 isa/ata > 34 pci/acpi_pcib > 125 pcib/pci > 124 pci/isab > 123 pci/ignore_pci > 122 pci/hostb > 166 watchdog > 121 pci/fixup_pci > 120 null > 119 mmc/mmcsd > 118 ti_mmchs/mmc > 117 sdhci_ti/mmc > 116 sdhci_pci/mmc > 203 eisab/isa > 202 isab/isa > 115 sdhci_imx/mmc > 114 sdhci_fdt/mmc > 113 sdhci_bcm/mmc > 112 at91_mci/mmc > 111 miibus/xmphy > 110 miibus/ukphy > 109 miibus/truephy > 108 miibus/tlphy > 107 miibus/tdkphy > 106 miibus/smscphy > 165 uhub/ukbd > 105 miibus/smcphy > 104 miibus/rlphy > 103 miibus/rgephy > 164 uhub/uhid > 102 miibus/rdcphy > 101 miibus/qsphy > 100 miibus/pnaphy > 99 miibus/nsphyter > 163 uhub/uplcom > 98 miibus/nsphy > 162 uhub/uhub > 161 usbus/uhub > 97 miibus/nsgphy > 96 miibus/mlphy > 95 miibus/lxtphy > 94 miibus/jmphy > 93 miibus/ip1000phy > 92 miibus/icsphy > 91 miibus/gentbi > 90 miibus/e1000phy > 89 miibus/ciphy > 88 miibus/brgphy > 87 miibus/bmtphy > 86 miibus/axphy > 85 miibus/atphy > 84 miibus/amphy > 83 miibus/acphy > 82 mem > 33 acpi/acpi_pcib > 27 acpi/acpi_ec > 32 acpi/acpi_pci_link > 44 atapci/ahci > 80 kbdmux > 43 pci/ahci > 160 uhub/usb_linux > 159 uhub/umass > 22 nexus/acpi > 42 ahci/ahciem > 158 dwcotg/usbus > 157 octusb/usbus > 156 uss820dci/usbus > 155 musbotg/usbus > 154 at91_udp/usbus > 289 nexus/cryptosoft > 153 xhci/usbus > 152 ehci/usbus > 151 uhci/usbus > 150 ohci/usbus > 285 nfslock > 41 ahci/ahcich > 24 acpi/acpi_button > 31 pcib/acpi_pci > 40 acpi/acpi_timer > 149 pci/xhci > 78 pci/ichsmb > 77 ichsmb/smbus > 190 g_raid > 193 g_raid_md_jmicron > 191 g_raid_md_ddf > 218 iconv > 195 g_raid_md_promise > 136 dummy > 192 g_raid_md_intel > 194 g_raid_md_nvidia > 310 nehemiah > 309 random_rdrand > 279 alias > 138 RANDOM_MODULE_NAME > 196 g_raid_md_sii > 200 g_raid_tr_raid1e > 292 g_class > 197 g_raid_tr_concat > 212 rootbus > 185 g_part > 238 wlan > 184 g_label > 81 g_md > 237 wlan_wep > 236 wlan_tkip > 235 wlan_ccmp > 183 g_vfs > 234 wlan_amrr > 233 wlan_wlan_acl > 199 g_raid_tr_raid1 > 79 icl > 232 zlib > 182 g_disk > 181 g_dev > 201 g_raid_tr_raid5 > 213 firmware > 241 wlan_xauth > 240 wlan_sta > 198 g_raid_tr_raid0 > 239 wlan_ratectl_none > 21 rc4 > 244 netgraph > 224 ether > 316 x86bios > 2 1 0xffffffff81211000 1d6fbe zfs.ko (/boot/kernel/zfs.ko) > Contains modules: > Id Name > 343 zfsctrl > 344 zfs > 346 zfs_vdev > 345 zfs_zvol > 3 1 0xffffffff813e8000 29a2 opensolaris.ko > (/boot/kernel/opensolaris.ko) > Contains modules: > Id Name > 342 opensolaris > > > Boot log from old working setup > > Sep 21 11:34:21 diablo kernel: FreeBSD clang version 3.4.1 > (tags/RELEASE_34/dot1-final 208032) 20140512 > Sep 21 11:34:21 diablo kernel: CPU: Intel(R) Core(TM)2 Duo CPU E8600 @ > 3.33GHz (3341.69-MHz K8-class CPU) > Sep 21 11:34:21 diablo kernel: Origin="GenuineIntel" Id=0x1067a > Family=0x6 Model=0x17 Stepping=10 > Sep 21 11:34:21 diablo kernel: > > Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> > Sep 21 11:34:21 diablo kernel: > > Features2=0xc08e3fd<SSE3,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,XSAVE,OSXSAVE> > Sep 21 11:34:21 diablo kernel: AMD Features=0x20100800<SYSCALL,NX,LM> > Sep 21 11:34:21 diablo kernel: AMD Features2=0x1<LAHF> > Sep 21 11:34:21 diablo kernel: VT-x: HLT,PAUSE > Sep 21 11:34:21 diablo kernel: TSC: P-state invariant, performance > statistics > Sep 21 11:34:21 diablo kernel: real memory = 9663676416 (9216 MB) > Sep 21 11:34:21 diablo kernel: avail memory = 6192463872 (5905 MB) > Sep 21 11:34:21 diablo kernel: Event timer "LAPIC" quality 400 > Sep 21 11:34:21 diablo kernel: ACPI APIC Table: <7512MS A7512300> > Sep 21 11:34:21 diablo kernel: FreeBSD/SMP: Multiprocessor System Detected: > 2 CPUs > Sep 21 11:34:21 diablo kernel: FreeBSD/SMP: 1 package(s) x 2 core(s) > Sep 21 11:34:21 diablo kernel: cpu0 (BSP): APIC ID: 0 > Sep 21 11:34:21 diablo kernel: cpu1 (AP): APIC ID: 1 > Sep 21 11:34:21 diablo kernel: ioapic0 <Version 2.0> irqs 0-23 on > motherboard > Sep 21 11:34:21 diablo kernel: wlan: mac acl policy registered > Sep 21 11:34:21 diablo kernel: kbd1 at kbdmux0 > Sep 21 11:34:21 diablo kernel: random: <Software, Yarrow> initialized > Sep 21 11:34:21 diablo kernel: smbios0: <System Management BIOS> at iomem > 0xfa1b0-0xfa1ce on motherboard > Sep 21 11:34:21 diablo kernel: smbios0: Version: 2.5 > Sep 21 11:34:21 diablo kernel: cryptosoft0: <software crypto> on > motherboard > Sep 21 11:34:21 diablo kernel: acpi0: <7512MS A7512300> on motherboard > Sep 21 11:34:21 diablo kernel: acpi0: Power Button (fixed) > Sep 21 11:34:21 diablo kernel: cpu0: <ACPI CPU> on acpi0 > Sep 21 11:34:21 diablo kernel: cpu1: <ACPI CPU> on acpi0 > Sep 21 11:34:21 diablo kernel: attimer0: <AT timer> port 0x40-0x43 irq 0 on > acpi0 > Sep 21 11:34:21 diablo kernel: Timecounter "i8254" frequency 1193182 Hz > quality 0 > Sep 21 11:34:21 diablo kernel: Event timer "i8254" frequency 1193182 Hz > quality 100 > Sep 21 11:34:21 diablo kernel: atrtc0: <AT realtime clock> port 0x70-0x71 > irq 8 on acpi0 > Sep 21 11:34:21 diablo kernel: Event timer "RTC" frequency 32768 Hz quality > 0 > Sep 21 11:34:21 diablo kernel: hpet0: <High Precision Event Timer> iomem > 0xfed00000-0xfed003ff on acpi0 > Sep 21 11:34:21 diablo kernel: Timecounter "HPET" frequency 14318180 Hz > quality 950 > Sep 21 11:34:21 diablo kernel: Event timer "HPET" frequency 14318180 Hz > quality 450 > Sep 21 11:34:21 diablo kernel: Event timer "HPET1" frequency 14318180 Hz > quality 440 > Sep 21 11:34:21 diablo kernel: Event timer "HPET2" frequency 14318180 Hz > quality 440 > Sep 21 11:34:21 diablo kernel: Event timer "HPET3" frequency 14318180 Hz > quality 440 > Sep 21 11:34:21 diablo kernel: Timecounter "ACPI-fast" frequency 3579545 Hz > quality 900 > Sep 21 11:34:21 diablo kernel: acpi_timer0: <24-bit timer at 3.579545MHz> > port 0x808-0x80b on acpi0 > Sep 21 11:34:21 diablo kernel: pcib0: <ACPI Host-PCI bridge> port > 0xcf8-0xcff on acpi0 > Sep 21 11:34:21 diablo kernel: pci0: <ACPI PCI bus> on pcib0 > Sep 21 11:34:21 diablo kernel: pcib1: <ACPI PCI-PCI bridge> irq 16 at > device 1.0 on pci0 > Sep 21 11:34:21 diablo kernel: pci1: <ACPI PCI bus> on pcib1 > Sep 21 11:34:21 diablo kernel: ath0: <Atheros AR938x> mem > 0xf7ce0000-0xf7cfffff irq 16 at device 0.0 on pci1 > Sep 21 11:34:21 diablo kernel: ar9300_set_stub_functions: setting stub > functions > Sep 21 11:34:21 diablo kernel: ar9300_set_stub_functions: setting stub > functions > Sep 21 11:34:21 diablo kernel: ar9300_attach: calling ar9300_hw_attach > Sep 21 11:34:21 diablo kernel: ar9300_hw_attach: calling > ar9300_eeprom_attach > Sep 21 11:34:21 diablo kernel: ar9300_flash_map: unimplemented for now > Sep 21 11:34:21 diablo kernel: Restoring Cal data from DRAM > Sep 21 11:34:21 diablo kernel: Restoring Cal data from EEPROM > Sep 21 11:34:21 diablo kernel: ar9300_hw_attach: ar9300_eeprom_attach > returned 0 > Sep 21 11:34:21 diablo kernel: ath0: RX status length: 48 > Sep 21 11:34:21 diablo kernel: ath0: RX buffer size: 4096 > Sep 21 11:34:21 diablo kernel: ath0: TX descriptor length: 128 > Sep 21 11:34:21 diablo kernel: ath0: TX status length: 36 > Sep 21 11:34:21 diablo kernel: ath0: TX buffers per descriptor: 4 > Sep 21 11:34:21 diablo kernel: ar9300_freebsd_setup_x_tx_desc: called, > 0x0/0, 0x0/0, 0x0/0 > Sep 21 11:34:21 diablo kernel: ath0: ath_edma_setup_rxfifo: type=0, FIFO > depth = 16 entries > Sep 21 11:34:21 diablo kernel: ath0: ath_edma_setup_rxfifo: type=1, FIFO > depth = 128 entries > Sep 21 11:34:21 diablo kernel: ath0: [HT] enabling HT modes > Sep 21 11:34:21 diablo kernel: ath0: [HT] enabling short-GI in 20MHz mode > Sep 21 11:34:21 diablo kernel: ath0: [HT] 1 stream STBC receive enabled > Sep 21 11:34:21 diablo kernel: ath0: [HT] 1 stream STBC transmit enabled > Sep 21 11:34:21 diablo kernel: ath0: [HT] 2 RX streams; 2 TX streams > Sep 21 11:34:21 diablo kernel: ath0: AR9380 mac 448.3 RF5110 phy 748.8 > Sep 21 11:34:21 diablo kernel: ath0: 2GHz radio: 0x0000; 5GHz radio: 0x0000 > Sep 21 11:34:21 diablo kernel: uhci0: <Intel 82801JI (ICH10) USB controller > USB-D> port 0xbc00-0xbc1f irq 16 at device 26.0 on pci0 > Sep 21 11:34:21 diablo kernel: uhci0: LegSup = 0x2f00 > Sep 21 11:34:21 diablo kernel: usbus0 on uhci0 > Sep 21 11:34:21 diablo kernel: uhci1: <Intel 82801JI (ICH10) USB controller > USB-E> port 0xb880-0xb89f irq 21 at device 26.1 on pci0 > Sep 21 11:34:21 diablo kernel: uhci1: LegSup = 0x2f00 > Sep 21 11:34:21 diablo kernel: usbus1 on uhci1 > Sep 21 11:34:21 diablo kernel: uhci2: <Intel 82801JI (ICH10) USB controller > USB-F> port 0xb800-0xb81f irq 19 at device 26.2 on pci0 > Sep 21 11:34:21 diablo kernel: uhci2: LegSup = 0x2f00 > Sep 21 11:34:21 diablo kernel: usbus2 on uhci2 > Sep 21 11:34:21 diablo kernel: ehci0: <Intel 82801JI (ICH10) USB 2.0 > controller USB-B> mem 0xf7bffc00-0xf7bfffff irq 18 at device 26.7 on pci0 > Sep 21 11:34:21 diablo kernel: usbus3: EHCI version 1.0 > Sep 21 11:34:21 diablo kernel: usbus3 on ehci0 > Sep 21 11:34:21 diablo kernel: pcib2: <ACPI PCI-PCI bridge> irq 17 at > device 28.0 on pci0 > Sep 21 11:34:21 diablo kernel: pci2: <ACPI PCI bus> on pcib2 > Sep 21 11:34:21 diablo kernel: atapci0: <JMicron JMB363 UDMA133 controller> > mem 0xf7dfe000-0xf7dfffff irq 16 at device 0.0 on pci2 > Sep 21 11:34:21 diablo kernel: atapci0: AHCI called from vendor specific > driver > Sep 21 11:34:21 diablo kernel: atapci0: AHCI v1.00 controller with 2 3Gbps > ports, PM supported > Sep 21 11:34:21 diablo kernel: ata2: <ATA channel> at channel 0 on atapci0 > Sep 21 11:34:21 diablo kernel: ata3: <ATA channel> at channel 1 on atapci0 > Sep 21 11:34:21 diablo kernel: atapci1: <JMicron JMB363 UDMA133 controller> > port 0xcc00-0xcc07,0xc880-0xc883,0xc800-0xc807,0xc480-0xc483,0xc400-0xc40f > irq 17 at device 0.1 on pci2 > Sep 21 11:34:21 diablo kernel: ata4: <ATA channel> at channel 0 on atapci1 > Sep 21 11:34:21 diablo kernel: pcib3: <ACPI PCI-PCI bridge> irq 18 at > device 28.2 on pci0 > Sep 21 11:34:21 diablo kernel: pci3: <ACPI PCI bus> on pcib3 > Sep 21 11:34:21 diablo kernel: re0: <D-Link DGE-528(T) Gigabit Ethernet > Adapter> port 0xd800-0xd8ff mem 0xf7eff000-0xf7efffff,0xf6efc000-0xf6efffff > irq 18 at device 0.0 on pci3 > Sep 21 11:34:21 diablo kernel: re0: Using 1 MSI-X message > Sep 21 11:34:21 diablo kernel: re0: Chip rev. 0x2c000000 > Sep 21 11:34:21 diablo kernel: re0: MAC rev. 0x00200000 > Sep 21 11:34:21 diablo kernel: miibus0: <MII bus> on re0 > Sep 21 11:34:21 diablo kernel: rgephy0: <RTL8169S/8110S/8211 1000BASE-T > media interface> PHY 1 on miibus0 > Sep 21 11:34:21 diablo kernel: rgephy0: none, 10baseT, 10baseT-FDX, > 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT, > 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, > 1000baseT-FDX-flow-master, auto, auto-flow > Sep 21 11:34:21 diablo kernel: re0: Using defaults for TSO: 65518/35/2048 > Sep 21 11:34:21 diablo kernel: re0: Ethernet address: ac:f1:df:3f:f6:18 > Sep 21 11:34:21 diablo kernel: pcib4: <ACPI PCI-PCI bridge> irq 16 at > device 28.5 on pci0 > Sep 21 11:34:21 diablo kernel: pci4: <ACPI PCI bus> on pcib4 > Sep 21 11:34:21 diablo kernel: re1: <RealTek 8168/8111 B/C/CP/D/DP/E/F/G > PCIe Gigabit Ethernet> port 0xe800-0xe8ff mem > 0xf7fff000-0xf7ffffff,0xf6ff0000-0xf6ffffff irq 17 at device 0.0 on pci4 > Sep 21 11:34:21 diablo kernel: re1: Using 1 MSI-X message > Sep 21 11:34:21 diablo kernel: re1: Chip rev. 0x3c000000 > Sep 21 11:34:21 diablo kernel: re1: MAC rev. 0x00400000 > Sep 21 11:34:21 diablo kernel: miibus1: <MII bus> on re1 > Sep 21 11:34:21 diablo kernel: rgephy1: <RTL8169S/8110S/8211 1000BASE-T > media interface> PHY 1 on miibus1 > Sep 21 11:34:21 diablo kernel: rgephy1: none, 10baseT, 10baseT-FDX, > 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT, > 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, > 1000baseT-FDX-flow-master, auto, auto-flow > Sep 21 11:34:21 diablo kernel: re1: Using defaults for TSO: 65518/35/2048 > Sep 21 11:34:21 diablo kernel: re1: Ethernet address: 00:21:85:1c:24:fa > Sep 21 11:34:21 diablo kernel: uhci3: <Intel 82801JI (ICH10) USB controller > USB-A> port 0xb480-0xb49f irq 23 at device 29.0 on pci0 > Sep 21 11:34:21 diablo kernel: uhci3: LegSup = 0x2f00 > Sep 21 11:34:21 diablo kernel: usbus4 on uhci3 > Sep 21 11:34:21 diablo kernel: uhci4: <Intel 82801JI (ICH10) USB controller > USB-B> port 0xb400-0xb41f irq 19 at device 29.1 on pci0 > Sep 21 11:34:21 diablo kernel: uhci4: LegSup = 0x2f00 > Sep 21 11:34:21 diablo kernel: usbus5 on uhci4 > Sep 21 11:34:21 diablo kernel: uhci5: <Intel 82801JI (ICH10) USB controller > USB-C> port 0xb080-0xb09f irq 18 at device 29.2 on pci0 > Sep 21 11:34:21 diablo kernel: uhci5: LegSup = 0x2f00 > Sep 21 11:34:21 diablo kernel: usbus6 on uhci5 > Sep 21 11:34:21 diablo kernel: ehci1: <Intel 82801JI (ICH10) USB 2.0 > controller USB-A> mem 0xf7bff800-0xf7bffbff irq 23 at device 29.7 on pci0 > Sep 21 11:34:21 diablo kernel: usbus7: EHCI version 1.0 > Sep 21 11:34:21 diablo kernel: usbus7 on ehci1 > Sep 21 11:34:21 diablo kernel: pcib5: <ACPI PCI-PCI bridge> at device 30.0 > on pci0 > Sep 21 11:34:21 diablo kernel: pci5: <ACPI PCI bus> on pcib5 > Sep 21 11:34:21 diablo kernel: vgapci0: <VGA-compatible display> mem > 0xf8000000-0xfbffffff irq 16 at device 0.0 on pci5 > Sep 21 11:34:21 diablo kernel: vgapci0: Boot video device > Sep 21 11:34:21 diablo kernel: ath1: <Atheros 5212> mem > 0xfebe0000-0xfebeffff irq 17 at device 1.0 on pci5 > Sep 21 11:34:21 diablo kernel: ath1: AR2413 mac 7.9 RF2413 phy 4.5 > Sep 21 11:34:21 diablo kernel: ath1: 2GHz radio: 0x0000; 5GHz radio: 0x0056 > Sep 21 11:34:21 diablo kernel: isab0: <PCI-ISA bridge> at device 31.0 on > pci0 > Sep 21 11:34:21 diablo kernel: isa0: <ISA bus> on isab0 > Sep 21 11:34:21 diablo kernel: ahci0: <Intel ICH10 AHCI SATA controller> > port 0xb000-0xb007,0xac00-0xac03,0xa880-0xa887,0xa800-0xa803,0xa480-0xa49f > mem 0xf7bff000-0xf7bff7ff irq 19 at device 31.2 on pci0 > Sep 21 11:34:21 diablo kernel: ahci0: AHCI v1.20 with 6 3Gbps ports, Port > Multiplier not supported > Sep 21 11:34:21 diablo kernel: ahcich0: <AHCI channel> at channel 0 on > ahci0 > Sep 21 11:34:21 diablo kernel: ahcich1: <AHCI channel> at channel 1 on > ahci0 > Sep 21 11:34:21 diablo kernel: ahcich2: <AHCI channel> at channel 2 on > ahci0 > Sep 21 11:34:21 diablo kernel: ahcich3: <AHCI channel> at channel 3 on > ahci0 > Sep 21 11:34:21 diablo kernel: ahcich4: <AHCI channel> at channel 4 on > ahci0 > Sep 21 11:34:21 diablo kernel: ahcich5: <AHCI channel> at channel 5 on > ahci0 > Sep 21 11:34:21 diablo kernel: ahciem0: <AHCI enclosure management bridge> > on ahci0 > Sep 21 11:34:21 diablo kernel: ichsmb0: <Intel 82801JI (ICH10) SMBus > controller> port 0x400-0x41f mem 0xf7bfec00-0xf7bfecff irq 18 at device > 31.3 on pci0 > Sep 21 11:34:21 diablo kernel: smbus0: <System Management Bus> on ichsmb0 > Sep 21 11:34:21 diablo kernel: acpi_button0: <Power Button> on acpi0 > Sep 21 11:34:21 diablo kernel: atkbdc0: <Keyboard controller (i8042)> port > 0x60,0x64 irq 1 on acpi0 > Sep 21 11:34:21 diablo kernel: atkbd0: <AT Keyboard> irq 1 on atkbdc0 > Sep 21 11:34:21 diablo kernel: kbd0 at atkbd0 > Sep 21 11:34:21 diablo kernel: atkbd0: [GIANT-LOCKED] > Sep 21 11:34:21 diablo kernel: ichwd0 on isa0 > Sep 21 11:34:21 diablo kernel: orm0: <ISA Option ROMs> at iomem > 0xc0000-0xc7fff,0xc8000-0xcafff,0xcb000-0xcbfff on isa0 > Sep 21 11:34:21 diablo kernel: sc0: <System console> at flags 0x100 on isa0 > Sep 21 11:34:21 diablo kernel: sc0: VGA <16 virtual consoles, flags=0x300> > Sep 21 11:34:21 diablo kernel: vga0: <Generic ISA VGA> at port 0x3c0-0x3df > iomem 0xa0000-0xbffff on isa0 > Sep 21 11:34:21 diablo kernel: ppc0: cannot reserve I/O port range > Sep 21 11:34:21 diablo kernel: coretemp0: <CPU On-Die Thermal Sensors> on > cpu0 > Sep 21 11:34:21 diablo kernel: est0: <Enhanced SpeedStep Frequency Control> > on cpu0 > Sep 21 11:34:21 diablo kernel: coretemp1: <CPU On-Die Thermal Sensors> on > cpu1 > Sep 21 11:34:21 diablo kernel: est1: <Enhanced SpeedStep Frequency Control> > on cpu1 > Sep 21 11:34:21 diablo kernel: Timecounters tick every 1.000 msec > Sep 21 11:34:21 diablo kernel: IPsec: Initialized Security Association > Processing. > Sep 21 11:34:21 diablo kernel: random: unblocking device. > Sep 21 11:34:21 diablo kernel: usbus0: 12Mbps Full Speed USB v1.0 > Sep 21 11:34:21 diablo kernel: usbus1: 12Mbps Full Speed USB v1.0 > Sep 21 11:34:21 diablo kernel: usbus2: 12Mbps Full Speed USB v1.0 > Sep 21 11:34:21 diablo kernel: usbus3: 480Mbps High Speed USB v2.0 > Sep 21 11:34:21 diablo kernel: usbus4: 12Mbps Full Speed USB v1.0 > Sep 21 11:34:21 diablo kernel: usbus5: 12Mbps Full Speed USB v1.0 > Sep 21 11:34:21 diablo kernel: usbus6: 12Mbps Full Speed USB v1.0 > Sep 21 11:34:21 diablo kernel: usbus7: 480Mbps High Speed USB v2.0 > Sep 21 11:34:21 diablo kernel: ugen1.1: <Intel> at usbus1 > Sep 21 11:34:21 diablo kernel: uhub0: <Intel UHCI root HUB, class 9/0, rev > 1.00/1.00, addr 1> on usbus1 > Sep 21 11:34:21 diablo kernel: ugen0.1: <Intel> at usbus0 > Sep 21 11:34:21 diablo kernel: uhub1: <Intel UHCI root HUB, class 9/0, rev > 1.00/1.00, addr 1> on usbus0 > Sep 21 11:34:21 diablo kernel: ugen3.1: <Intel> at usbus3 > Sep 21 11:34:21 diablo kernel: uhub2: <Intel EHCI root HUB, class 9/0, rev > 2.00/1.00, addr 1> on usbus3 > Sep 21 11:34:21 diablo kernel: ugen2.1: <Intel> at usbus2 > Sep 21 11:34:21 diablo kernel: uhub3: <Intel UHCI root HUB, class 9/0, rev > 1.00/1.00, addr 1> on usbus2 > Sep 21 11:34:21 diablo kernel: ugen6.1: <Intel> at usbus6 > Sep 21 11:34:21 diablo kernel: uhub4: <Intel UHCI root HUB, class 9/0, rev > 1.00/1.00, addr 1> on usbus6 > Sep 21 11:34:21 diablo kernel: ugen5.1: <Intel> at usbus5 > Sep 21 11:34:21 diablo kernel: uhub5: <Intel UHCI root HUB, class 9/0, rev > 1.00/1.00, addr 1> on usbus5 > Sep 21 11:34:21 diablo kernel: ugen4.1: <Intel> at usbus4 > Sep 21 11:34:21 diablo kernel: uhub6: <Intel UHCI root HUB, class 9/0, rev > 1.00/1.00, addr 1> on usbus4 > Sep 21 11:34:21 diablo kernel: ugen7.1: <Intel> at usbus7 > Sep 21 11:34:21 diablo kernel: uhub7: <Intel EHCI root HUB, class 9/0, rev > 2.00/1.00, addr 1> on usbus7 > Sep 21 11:34:21 diablo kernel: uhub1: 2 ports with 2 removable, self > powered > Sep 21 11:34:21 diablo kernel: uhub0: 2 ports with 2 removable, self > powered > Sep 21 11:34:21 diablo kernel: uhub5: 2 ports with 2 removable, self > powered > Sep 21 11:34:21 diablo kernel: uhub4: 2 ports with 2 removable, self > powered > Sep 21 11:34:21 diablo kernel: uhub3: 2 ports with 2 removable, self > powered > Sep 21 11:34:21 diablo kernel: uhub6: 2 ports with 2 removable, self > powered > Sep 21 11:34:21 diablo kernel: ada0 at ata2 bus 0 scbus0 target 0 lun 0 > Sep 21 11:34:21 diablo kernel: ada0: <WDC WD1200JS-00MHB0 02.01C03> ATA-7 > SATA 2.x device > Sep 21 11:34:21 diablo kernel: ada0: Serial Number WD-WCANN1196255 > Sep 21 11:34:21 diablo kernel: ada0: 300.000MB/s transfers (SATA 2.x, > UDMA5, PIO 8192bytes) > Sep 21 11:34:21 diablo kernel: ada0: 114473MB (234441648 512 byte sectors: > 16H 63S/T 16383C) > Sep 21 11:34:21 diablo kernel: ada0: Previously was known as ad4 > Sep 21 11:34:21 diablo kernel: ada1 at ata3 bus 0 scbus1 target 0 lun 0 > Sep 21 11:34:21 diablo kernel: ada1: <WDC WD1200JS-00MHB0 02.01C03> ATA-7 > SATA 2.x device > Sep 21 11:34:21 diablo kernel: ada1: Serial Number WD-WCANM2598160 > Sep 21 11:34:21 diablo kernel: ada1: 300.000MB/s transfers (SATA 2.x, > UDMA5, PIO 8192bytes) > Sep 21 11:34:21 diablo kernel: ada1: 114473MB (234441648 512 byte sectors: > 16H 63S/T 16383C) > Sep 21 11:34:21 diablo kernel: ada1: Previously was known as ad6 > Sep 21 11:34:21 diablo kernel: ada2 at ata4 bus 0 scbus2 target 0 lun 0 > Sep 21 11:34:21 diablo kernel: ada2: <ST3160023A 8.01> ATA-6 device > Sep 21 11:34:21 diablo kernel: ada2: Serial Number 5LJ0A9XS > Sep 21 11:34:21 diablo kernel: ada2: 100.000MB/s transfers (UDMA5, PIO > 8192bytes) > Sep 21 11:34:21 diablo kernel: ada2: 152627MB (312581808 512 byte sectors: > 16H 63S/T 16383C) > Sep 21 11:34:21 diablo kernel: ada2: Previously was known as ad8 > Sep 21 11:34:21 diablo kernel: ada3 at ahcich0 bus 0 scbus3 target 0 lun 0 > Sep 21 11:34:21 diablo kernel: ada3: <WDC WD20EARX-00PASB0 51.0AB51> > ATA8-ACS SATA 2.x device > Sep 21 11:34:21 diablo kernel: ada3: Serial Number WD-WCAZA8280505 > Sep 21 11:34:21 diablo kernel: ada3: 300.000MB/s transfers (SATA 2.x, > UDMA6, PIO 8192bytes) > Sep 21 11:34:21 diablo kernel: ada3: Command Queueing enabled > Sep 21 11:34:21 diablo kernel: ada3: 1907729MB (3907029168 512 byte > sectors: 16H 63S/T 16383C) > Sep 21 11:34:21 diablo kernel: ada3: quirks=0x1<4K> > Sep 21 11:34:21 diablo kernel: ada3: Previously was known as ad10 > Sep 21 11:34:21 diablo kernel: ada4 at ahcich1 bus 0 scbus4 target 0 lun 0 > Sep 21 11:34:21 diablo kernel: ada4: <ST3160815AS 3.AAD> ATA-7 SATA 1.x > device > Sep 21 11:34:21 diablo kernel: ada4: Serial Number 6RA324XR > Sep 21 11:34:21 diablo kernel: ada4: 150.000MB/s transfers (SATA 1.x, > UDMA6, PIO 8192bytes) > Sep 21 11:34:21 diablo kernel: ada4: Command Queueing enabled > Sep 21 11:34:21 diablo kernel: ada4: 152626MB (312579695 512 byte sectors: > 16H 63S/T 16383C) > Sep 21 11:34:21 diablo kernel: ada4: Previously was known as ad12 > Sep 21 11:34:21 diablo kernel: ada5 at ahcich2 bus 0 scbus5 target 0 lun 0 > Sep 21 11:34:21 diablo kernel: ada5: <ST31000333AS SD1B> ATA8-ACS SATA 2.x > device > Sep 21 11:34:21 diablo kernel: ada5: Serial Number 9TE0W3YT > Sep 21 11:34:21 diablo kernel: ada5: 300.000MB/s transfers (SATA 2.x, > UDMA6, PIO 8192bytes) > Sep 21 11:34:21 diablo kernel: ada5: Command Queueing enabled > Sep 21 11:34:21 diablo kernel: ada5: 953869MB (1953525168 512 byte sectors: > 16H 63S/T 16383C) > Sep 21 11:34:21 diablo kernel: ada5: Previously was known as ad14 > Sep 21 11:34:21 diablo kernel: ada6 at ahcich3 bus 0 scbus6 target 0 lun 0 > Sep 21 11:34:21 diablo kernel: ada6: <ST31000340NS SN06> ATA8-ACS SATA 2.x > device > Sep 21 11:34:21 diablo kernel: ada6: Serial Number 9QJ4C26H > Sep 21 11:34:21 diablo kernel: ada6: 300.000MB/s transfers (SATA 2.x, > UDMA6, PIO 8192bytes) > Sep 21 11:34:21 diablo kernel: ada6: Command Queueing enabled > Sep 21 11:34:21 diablo kernel: ada6: 953869MB (1953525168 512 byte sectors: > 16H 63S/T 16383C) > Sep 21 11:34:21 diablo kernel: ada6: Previously was known as ad16 > Sep 21 11:34:21 diablo kernel: ada7 at ahcich5 bus 0 scbus8 target 0 lun 0 > Sep 21 11:34:21 diablo kernel: ada7: <WDC WD20EARX-00PASB0 51.0AB51> > ATA8-ACS SATA 2.x device > Sep 21 11:34:21 diablo kernel: GEOM_RAID: JMicron-6e1c79e: Array > JMicron-6e1c79e created. > Sep 21 11:34:21 diablo kernel: ada7: Serial Number WD-WCAZA8280575 > Sep 21 11:34:21 diablo kernel: ada7: 300.000MB/s transfers (SATA 2.x, > UDMA6, PIO 8192bytes) > Sep 21 11:34:21 diablo kernel: ada7: Command Queueing enabled > Sep 21 11:34:21 diablo kernel: ada7: 1907729MB (3907029168 512 byte > sectors: 16H 63S/T 16383C) > Sep 21 11:34:21 diablo kernel: ada7: quirks=0x1<4K> > Sep 21 11:34:21 diablo kernel: ada7: Previously was known as ad20 > Sep 21 11:34:21 diablo kernel: ses0 at ahciem0 bus 0 scbus9 target 0 lun 0 > Sep 21 11:34:21 diablo kernel: ses0: <AHCI SGPIO Enclosure 1.00 0001> SEMB > S-E-S 2.00 device > Sep 21 11:34:21 diablo kernel: ses0: SEMB SES Device > Sep 21 11:34:21 diablo kernel: GEOM_RAID: JMicron-6e1c79e: Disk ada0 state > changed from NONE to ACTIVE. > Sep 21 11:34:21 diablo kernel: GEOM_RAID: JMicron-6e1c79e: Subdisk > SYSMIRROR:0-ada0 state changed from NONE to ACTIVE. > Sep 21 11:34:21 diablo kernel: GEOM_RAID: JMicron-6e1c79e: Disk ada1 state > changed from NONE to ACTIVE. > Sep 21 11:34:21 diablo kernel: GEOM_RAID: JMicron-6e1c79e: Subdisk > SYSMIRROR:1-ada1 state changed from NONE to ACTIVE. > Sep 21 11:34:21 diablo kernel: GEOM_RAID: JMicron-6e1c79e: Array started. > Sep 21 11:34:21 diablo kernel: GEOM_RAID: JMicron-6e1c79e: Volume SYSMIRROR > state changed from STARTING to OPTIMAL. > Sep 21 11:34:21 diablo kernel: GEOM_RAID: JMicron-6e1c79e: Provider raid/r0 > for volume SYSMIRROR created. > Sep 21 11:34:21 diablo kernel: SMP: AP CPU #1 Launched! > Sep 21 11:34:21 diablo kernel: Root mount waiting for: usbus7 usbus3 > Sep 21 11:34:21 diablo kernel: Root mount waiting for: usbus7 usbus3 > Sep 21 11:34:21 diablo kernel: uhub2: 6 ports with 6 removable, self > powered > Sep 21 11:34:21 diablo kernel: uhub7: 6 ports with 6 removable, self > powered > Sep 21 11:34:21 diablo kernel: Trying to mount root from > ufs:/dev/ufs/rootfs [rw,noatime]... > -- > amd_miek > Think different. > Just superior. > > > ------------------------------ > > Subject: Digest Footer > > _______________________________________________ > freebsd-stable@freebsd.org mailing list > https://lists.freebsd.org/mailman/listinfo/freebsd-stable > To unsubscribe, send any mail to "freebsd-stable-unsubscr...@freebsd.org" > > ------------------------------ > > End of freebsd-stable Digest, Vol 635, Issue 1 > ********************************************** > -- amd_miek Think different. Just superior. _______________________________________________ freebsd-stable@freebsd.org mailing list https://lists.freebsd.org/mailman/listinfo/freebsd-stable To unsubscribe, send any mail to "freebsd-stable-unsubscr...@freebsd.org"